Sony KLH-W26/T Protocol Manual

Sony KLH-W26/T Manual

Sony KLH-W26/T manual content summary:

  • Sony KLH-W26/T | Protocol Manual - Page 1
    FLAT WIDE DISPLAY MONITOR FWD-40LX2F FWD-40LX2X FWD-32LX2F FWD-32LX2X KLH-W32 KLH-W26 PROTOCOL MANUAL 1st Edition
  • Sony KLH-W26/T | Protocol Manual - Page 2
  • Sony KLH-W26/T | Protocol Manual - Page 3
    Table of Contents 1. Communication Parameters 1 2. Pin Assignment 1 3. Communication Data Format 1 4. General Function 3 5. Picture/Sound 11 6. Size/Shift 13 7. Status Enquiry 16 8. User Reset 20 9. Service ...20 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 4
  • Sony KLH-W26/T | Protocol Manual - Page 5
    after waiting each required time. In the case when the power is turned on from the standby state, the starting up by using the timer (KLH-W26/W32 does not have this function), the power key of main unit or the remote commander is included as well as the command from RS
  • Sony KLH-W26/T | Protocol Manual - Page 6
    the upper limit. * Check Sum: Sum total of 1 to 2. Lower one-byte data is validated when a value exceeds 255 (1byte). 2 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 7
    OFF 0x01 ON Auto Status Display 0x00 ON 0x01 OFF Index Number 0x01-0xFF Speaker Out 0x00 ON 0x01 OFF FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26 Command Control Yes Yes Yes Yes Yes Yes Yes Enquiry Yes Yes Yes Yes Yes Yes Yes Standby Enable Disable Disable Disable Enable Disable
  • Sony KLH-W26/T | Protocol Manual - Page 8
    Yes Yes Yes Yes No 4 Standby Disable Disable Disable Power On Enable Enable Enable Disable Enable Disable Disable Enable Enable FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 9
    Yes Enquiry Yes Yes Yes Yes Yes Standby Disable Disable Disable Disable Enable Power On Enable Enable Enable Enable Enable FWD-40LX2F/40LX2X/32LX2F/32LX2X 5 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 10
    1:Enable, 0:Disable bit6 Saturday 1:Enable, 0:Disable bit7 Every day 1:Enable, 0:Disable 0x00 DHCP Yes 0x01 Manual 0x02 Speed 0x00 No No 0x01 Yes 0x00 Done Yes 0x01 Error 1 (UART Commu.) 0x02 Error 2 Enable Enable Enable Disable Enable FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 11
    the next command 3 seconds Power On and Power Off commands are transmitted. If not,correct data may not be able to be acquired. *2: KLH-W26/W32 does not have this function. *3: This unit automatically detects the input signal. Therefore changing in automatically if not setting a kind of signal
  • Sony KLH-W26/T | Protocol Manual - Page 12
    Answer Enquiry Header 0x70 Answer 0x00 Return to Data Size 0x02 Return Data1 Check Sum Week:Code Table (1-e) 0xXX Completed 8 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 13
    0x00 Return to Data Size 0x03 Return Data1 Hour: 0x00-0x17 Return Data2 Minute: 0x00-0x3B Check Sum 0xXX Completed FWD-40LX2F/40LX2X/32LX2F/32LX2X 9 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 14
    0x56 Saturday 0x57 Every day Off Timer 0x58 Sunday 0x59 Monday 0x5A Tuesday 0x5B Wednesday 0x5C Thursday 0x5D Friday 0x5E Saturday 0x5F Every day *1: KLH-W26/W32 does not have this function. (c) IP Address Setting Command Control Yes Yes Yes Enquiry Yes Yes Yes Standby Power On Disable Enable
  • Sony KLH-W26/T | Protocol Manual - Page 15
    Answer Enquiry Header 0x70 Answer 0x00 Return to Data Size 0x02 Return Data1 Code Table (2-a)[b] Check Sum 0xXX Completed FWD-40LX2F/40LX2X/32LX2F/32LX2X 11 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 16
    70 0x02 50 0x39 Common Audio 0x00 HD15 Yes Select 0x01 HDMI1 0x02 HDMI2 *1: Sound mode = Custom and Speaker = On is enable *2: KLH-W26/W32 does not have this function. (b) Color Temp Syntax Control Header 0x8C Category 0x10 Function Code Table (2-b)[a] Data1 0x03 Enquiry Yes Yes
  • Sony KLH-W26/T | Protocol Manual - Page 17
    Answer Enquiry Header 0x70 Answer 0x00 Return to Data Size 0x02 Return Data1 Check Sum Code Table (3-b)[b] 0xXX Completed FWD-40LX2F/40LX2X/32LX2F/32LX2X 13 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 18
    Standby Disable Disable Disable Disable Disable Disable Disable Disable Power On Enable Enable Enable Enable Enable Enable Enable Enable 14 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 19
    Disable Power On Enable Enable Enable 12 34 123 456 789 1234 5678 9 10 11 12 13 14 15 16 *2: VIDEO Mode Only is Enabled. *3: KLH-W26/W32 does not have this function. FWD-40LX2F/40LX2X/32LX2F/32LX2X 15
  • Sony KLH-W26/T | Protocol Manual - Page 20
    Check Sum 0xXX Completed Code Table(4-a) Format Select 0x0C 0x0D 0x0E 0x0F 0x60 0x61 FWD-40LX2X FWD-32LX2X FWD-40LX2F FWD-32LX2F KLH-W26 KLH-W32 (b) Serial Number Syntax Enquiry Header 0x83 Category 0x30 Function 0x01 Data1 0xFF Data2 0xFF Check Sum 0xB2 Answer Header Answer Return
  • Sony KLH-W26/T | Protocol Manual - Page 21
    Reserved Reserved 1: Panel communication Abnormal, 0: Normal 1: Temperature Sensor Abnormal, 0: Normal Reserved Reserved 1: Analog Power Abnormal (13 V, 5 V) 0: Normal Reserved Completed FWD-40LX2F/40LX2X/32LX2F/32LX2X 17 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 22
    (Analog) No Input No Input Video/S-Video RGB/YUV (Analog) Video/S-Video/RGB/YUV (Analog) No Input No Input 18 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 23
    KLH-W26/W32 Input INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 OPTION1 Input Type (Basic) 0x06 RGB/YUV (Analog) 0x08 HDMI 0x08 HDMI 0x00 No Input 0x00 Auto Input Detect Auto Panel Type Detect Command Control No Enquiry Yes Standby Enable Power On Enable FWD-40LX2F/40LX2X/32LX2F/32LX2X 19 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 24
    Clock, Phase Contrast, Brightness, Chroma, Phase Enquiry No Standby Disable Power On Enable 9. Service (a) Mode Syntax Control Header 0x8C Category 0xF0 Function Code Table (6) Data1 0x02 Data2 0xFF Table (7) Check Sum 0xXX Completed 20 FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 25
    Service Mode Enable Check Sum 0xXX Answer Control Header 0x70 Answer 0x00 Check Sum 0x70 Completed Code Table (8) Function 0x88 Factory Reset Range/Switch code Command Control Yes Enquiry No Normal Mode Disable Service Mode Enable FWD-40LX2F/40LX2X/32LX2F/32LX2X 21 KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 26
  • Sony KLH-W26/T | Protocol Manual - Page 27
    manual without the express written permission of Sony Corporation. Le matériel contenu dans ce manuel consiste en informations qui sont la propriété de Sony Corporation. Sony Ausrüstung ohne ausdrückliche schriftliche Erlaubnis der Sony Corporation. FWD-40LX2F/40LX2X/32LX2F/32LX2X KLH-W32/W26
  • Sony KLH-W26/T | Protocol Manual - Page 28
    FWD-40LX2F (WW) FWD-40LX2X (WW) FWD-32LX2F (WW) FWD-32LX2X (WW) KLH-W32 (WW) KLH-W26 (WW) E 9-834-146-01 Sony Corporation Printed in Japan 2006. 12 22 ©2006
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

FLAT WIDE DISPLAY MONITOR
FWD-40LX2F
FWD-40LX2X
FWD-32LX2F
FWD-32LX2X
KLH-W32
KLH-W26
PROTOCOL MANUAL
1st Edition