Sony KP-46WT520 Operating Instructions - Page 31
Satellite Receiver and VCR
View all Sony KP-46WT520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
SETUP Setup SETUP Satellite Receiver and VCR Using S VIDEO jacks? See page 23. To connect a satellite receiver and VCR 1 Connect the CATV cable to the single (input) jack of the splitter. 2 Use a coaxial cable to connect one of the splitter's two output jacks to the TV's VHF/UHF jack. 3 Use a coaxial cable to connect the splitter's other output jack to the satellite receiver's VHF/UHF input jack. 4 Connect the satellite antenna cable to the satellite receiver's satellite input jack. 5 Use a coaxial cable to connect the satellite receiver's VHF/UHF output jack to the VCR's VHF/UHF input jack. 6 Use an A/V cable to connect the satellite receiver's A/V output jacks to the TV's A/V input jacks. 7 Use an A/V cable to connect the VCR's A/V output jacks to the TV's A/V input jacks. 8 Run Auto Program, as described in "Setting Up the Channel List" on page 39. Notes on Using This Connection To Do This ... Do This ... Watch the satellite receiver Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 3 in the illustration). Watch the VCR Press TV/VIDEO repeatedly to select VCR input (VIDEO 1 in the illustration). Set up the TV remote control to operate the satellite receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the remote control. See "Programming the Remote Control" on pages 46-47. Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, press control to operate the satellite DVD/VCR FUNCTION. receiver or VCR Control satellite receiver and See "Operating a Satellite Receiver" on page 48 and "Operating a VCR" on VCR functions with the TV page 48. remote control Label video inputs to easily See the instructions for setting up Video Labels on pages 72-73. identify equipment connected to the TV SETUP SETUP SETUP 30