Sony KP-51HW40 Operating Instructions
Sony KP-51HW40 - 51" Projection Television Manual
 |
View all Sony KP-51HW40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony KP-51HW40 manual content summary:
- Sony KP-51HW40 | Operating Instructions - Page 1
4-084-488-12(1) Projection TV Operating Instructions © 2001 Sony Corporation KP-51HW40 KP-57HW40 - Sony KP-51HW40 | Operating Instructions - Page 2
(servicing) instructions screen. These types of imprints are not covered by your warranty. 2 Note on Caption Vision This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules. Note on convergence adjustment Before you use your projection TV - Sony KP-51HW40 | Operating Instructions - Page 3
picture settings. This will help you reduce the risk of causing image retention. IMAGE RETENTION IS NOT COVERED BY YOUR WARRANTY This document is for the remote control RM-Y909. MODELS: KP-51HW40, KP-57HW40 Please keep this notice with the instruction manual. Safety ❑ Operate the projection TV - Sony KP-51HW40 | Operating Instructions - Page 4
warnings, cautions and instructions placed on the set or described in the operating instructions or service manual. WARNING To guard picture becomes dark after using the projection TV for a long period of time, it may be necessary to clean the inside of the projection TV. Consult qualified service - Sony KP-51HW40 | Operating Instructions - Page 5
line for the specific model of projection TV. An appliance and cart lines or other electric light or power circuits, or where it can come in contact with such power lines SUCH POWER LINES OR CIRCUITS of the mast and supporting structure, grounding of the Ground clamp Electrical service equipment NEC: - Sony KP-51HW40 | Operating Instructions - Page 6
set reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask a qualified service technician to dispose of the set. For Safety Be careful when moving the projection TV When you place the projection TV in position, be careful not to drop it on your foot or - Sony KP-51HW40 | Operating Instructions - Page 7
AV Receiver 30 Using the CONTROL S Feature 31 Setting Up the Projection TV Automatically.........32 Adjusting the Convergence Automatically - FLASH FOCUS 33 Using the Menus Overview 48 Using the Video Menu 49 Using the Audio Menu 51 Using the Channel Menu 53 Using the Wide Menu 55 Using the - Sony KP-51HW40 | Operating Instructions - Page 8
the Sony Projection TV Presenting the Sony Projection TV Thank you for purchasing the Sony Projection TV. This manual is for models KP-51HW40 and KP-57HW40. Model KP-51HW40 is used for illustration purposes. Features Some of the features that you will enjoy with your new projection TV include - Sony KP-51HW40 | Operating Instructions - Page 9
TV Introducing the Sony Projection TV ❑ Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in wide screen mode (16:9 aspect ratio). ❑ Auto Wide: Allows you to select the wide screen mode automatically. ❑ Flash Focus™: Allows you to adjust convergence automatically. Using this manual - Sony KP-51HW40 | Operating Instructions - Page 10
, a remote control and two AA batteries. No peripheral cables are included. If you intend to add additional equipment to your projection TV, please check the hookup instructions for your desired setup before you begin. You may need to purchase cables and/ or splitters to complete the hookup properly - Sony KP-51HW40 | Operating Instructions - Page 11
Installing and Connecting the Projection TV Installing the Projection TV Installing and Connecting the Projection TV Recommended viewing area (Horizontal) min. 60˚ 1.8 m5m1(i"anp. 2p.r1oxm.56(7af"pt.p) rox. 7 ft.) 60˚ Recommended viewing area (Vertical) min. min. 2.1 1.8 m57(a"pprox. - Sony KP-51HW40 | Operating Instructions - Page 12
video cable for enhanced picture quality Align guides and push into connection. Audio/Video cable Push into connection. Video - Yellow Audio (Left) - White Audio (Right) - Red Some DVD Players are equipped with the following three video connectors: Y - Green PB (CB, Cb or B-Y) - Blue PR (CR, Cr or - Sony KP-51HW40 | Operating Instructions - Page 13
and Connecting the Projection TV Projection TV Controls and Connectors Front Panel Menu Controls The front panel menu controls allow access to the on-screen menus without the use of a remote control. Pressing MENU brings up the on-screen menus. The arrow buttons move the on-screen cursor in the - Sony KP-51HW40 | Operating Instructions - Page 14
Installing and Connecting the Projection TV Projection TV Rear and Front Panel Connectors Rear of projection TV Front of projection TV 14 - Sony KP-51HW40 | Operating Instructions - Page 15
other S VIDEO-equipped video component. Provides better picture quality than the VHF/UHF jacks or the Video manual supplied with the AV receiver. Connects to the left and right audio inputs of your audio or video component. 9 CONTROL S IN/OUT To control other Sony equipment with the projection TV - Sony KP-51HW40 | Operating Instructions - Page 16
Rear of projection TV B VHF Only or UHF Only or VHF/UHF 300-ohm twin lead cable VHF/UHF Rear of projection TV Antenna connector C VHF and UHF 75-ohm coaxial cable 300-ohm twin lead cable VHF/UHF Rear of projection TV TO CONVERTER Rear of projection TV Antenna cable - Sony KP-51HW40 | Operating Instructions - Page 17
splitter. 3 Using a coaxial cable, connect the cable box's OUT jack to the projection TV's AUX jack. Cable box IN OUT AUX Rear of projection TV TO CONVERTER 75-ohm coaxial cable (not supplied) Signal VHF/UHF CATV cable (unscrambled channels) ✍ Pressing ANT on the remote control switches - Sony KP-51HW40 | Operating Instructions - Page 18
hookup on page 17 instead. 1 Connect the coaxial connector from your cable service to the cable box's IN jack. 2 Using a coaxial cable, connect the cable box's OUT jack to the TV's VHF/UHF jack. Cable VHF/UHF Rear of projection TV z Setting the Channel Fix feature in the Channel menu (see "Using - Sony KP-51HW40 | Operating Instructions - Page 19
3 Using AUDIO and S VIDEO cables, connect the VCR's Audio and S Video OUT jacks to the projection TV's AUDIO and S VIDEO IN jacks. Rear of Projection TV S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VMC-810S/820S (not supplied) Coaxial cable VCR Cable YC-15V/30V (not supplied) ✍ If your - Sony KP-51HW40 | Operating Instructions - Page 20
box, and ❑ You want to enjoy the Twin View feature. With this setup you can: ❑ Use the projection TV remote control to change channels on your cable box when the signal is scrambled. To program your Sony remote control to operate your cable box, See "Programming the Remote Control" on page 68. ❑ Use - Sony KP-51HW40 | Operating Instructions - Page 21
Installing and Connecting the Projection TV S VIDEO Installing and Connecting the Projection TV YC-15V/30V (not supplied) VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) VMC-810S/820S (not supplied) VCR Coaxial cable Cable box Coaxial cable Rear of projection TV ✍ If your VCR is not equipped - Sony KP-51HW40 | Operating Instructions - Page 22
tape editing, set the projection TV to the video input intended for playback by pressing TV/VIDEO on the remote control. ✍ You may need to change the video input on your VCR. Consult your VCR's operating manual for instructions. ✍ If your VCRs have an S VIDEO jack: For best picture quality, use an - Sony KP-51HW40 | Operating Instructions - Page 23
receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. Rear of projection TV Coaxial cable S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) Satellite receiver VMC-810S/820S (not supplied) YC-15V/30V (not supplied) Satellite antenna cable 23 - Sony KP-51HW40 | Operating Instructions - Page 24
OUT jacks to the TV's AUDIO and S VIDEO IN jacks. Rear of projection TV Satellite receiver Satellite antenna cable AUDIO-R (red) AUDIO-L (white) manual for instructions. ✍ Use TV/VIDEO to select - VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned on). - VHF/UHF to watch cable TV - Sony KP-51HW40 | Operating Instructions - Page 25
and Connecting the Projection TV Connecting an Audio Receiver Disconnect all power sources before making any connections. Using audio cables, connect the projection TV's AUDIO OUT (VAR/FIX) jacks to the audio receiver's audio LINE IN jacks. Rear of projection TV AUDIO-R (red) AUDIO-L (white) RK - Sony KP-51HW40 | Operating Instructions - Page 26
the Projection TV Connecting player's Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the projection TV. Use the VIDEO IN 5 or 6 connections. ✍ The Y, B-Y and R-Y an audio cable, connect the DVD player's Audio OUT jacks to the projection TV's AUDIO IN jacks. Be sure to use the same row of inputs - Sony KP-51HW40 | Operating Instructions - Page 27
Using an S VIDEO cable, connect the DVD player's S VIDEO jack to the projection TV's S VIDEO jack. Rear of projection TV YC-15V/30V (not supplied) DVD player S VIDEO AUDIO-R (red) AUDIO-L (white) RK-74A (not supplied) ✍ Use TV/VIDEO on the remote control to switch between the VCR, DVD player and - Sony KP-51HW40 | Operating Instructions - Page 28
Set-top box's Audio OUT jacks to the projection TV's AUDIO IN jacks. Digital TV Set-top box VMC-10HG (not supplied) PR PB Y Rear of projection TV 28 AUDIO-R (red) AUDIO-L (white) RK-74A (not supplied) ✍ You cannot record the signal from any equipment connected into the Y, PB and PR connectors - Sony KP-51HW40 | Operating Instructions - Page 29
below). However, if you prefer, you can also connect the camcorder to the projection TV's rear Audio and Video IN jacks. Using AUDIO and S VIDEO cables, connect the camcorder's Audio and S VIDEO OUT jacks to the projection TV's AUDIO and S VIDEO IN jacks. ✍ If you have a mono camcorder, connect its - Sony KP-51HW40 | Operating Instructions - Page 30
equipment to the AV receiver. 6 Select the Setup menu and set "Video Label" to "Receiver" to fix your TV's input to AV receiver (see "Video Label" on page 59). Rear of projection TV Coaxial cable (not supplied) VMC-810S/820S (not supplied) VCR 30 VIDEO AUDIO-L AUDIO-R VIDEO Cable/ Antenna - Sony KP-51HW40 | Operating Instructions - Page 31
to allowing you to control multiple devices with one remote control, the CONTROL S feature allows you to always point your remote control at your projection TV, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight. Rear of projection TV 31 - Sony KP-51HW40 | Operating Instructions - Page 32
. Using Auto Setup 1 Press POWER on the front panel of your projection TV or on the remote control to turn on the projection TV. 2 Press the TV (FUNCTION) button on your remote control. Red light will briefly appear. 3 Press CH+ on your projection TV to run Auto Setup, or press CH- to exit. If you - Sony KP-51HW40 | Operating Instructions - Page 33
the Projection TV Adjusting the Convergence Automatically - FLASH FOCUS™ - The projection tube image appears on the screen in three colors (red, green and blue). If they do not converge, the color is poor and the picture blurs. Before you use your projection TV, be sure to adjust the convergence - Sony KP-51HW40 | Operating Instructions - Page 34
and channel number. Press again to turn Display off. See page 57 for details on setting the time. Press to jump back and forth between two channels. The projection TV alternates between the current channel and the last channel that was selected. Freezes the window picture. Press again to restore the - Sony KP-51HW40 | Operating Instructions - Page 35
changes after 2 seconds. Press ENTER to select immediately. qj Turns on/off Twin View. For details, see "Using Twin View™" on page 41. GUIDE Displays the program guide of your satellite. qk MENU Press to display the projection TV on-screen menu. Press again to exit from the menu. ql CH - Sony KP-51HW40 | Operating Instructions - Page 36
turn off the projection TV and all equipment connected with S-Link. 2N Play 3m Rewind 4 REC Record 5x Stop 6 DVD MENU Displays the DVD menu. 7 MTS/SAP Press to scroll through the Multi-channel TV to turn on the DVD/VCR player you have programmed into the remote control. For instructions, - Sony KP-51HW40 | Operating Instructions - Page 37
input. 3 TV (POWER) Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH Press to adjust the volume (+ up or - down). 7 JUMP Press to alternate or jump back and forth between two channels. The projection TV will jump - Sony KP-51HW40 | Operating Instructions - Page 38
select Skip as a Video Label in the Setup menu, your projection TV will skip the video input you selected (see "Video Label" on page 59). qd MTS/SAP Press to scroll through the Multi-channel TV Sound (MTS) options (see "MTS" on page 51). qf PIC MODE Press PIC MODE repeatedly to directly choose - Sony KP-51HW40 | Operating Instructions - Page 39
format signal. To view a digital TV program 1 Connect the DTV receiver to VIDEO 5 or 6 IN on the projection TV. (for details, see page 28) 2 Press TV/VIDEO to select VIDEO 5 or 6. 3 Select a digital channel on the DTV receiver. For details, see the Operating Manual of the DTV receiver. 4 Adjust the - Sony KP-51HW40 | Operating Instructions - Page 40
list of favorite channels that you preset. To display a list of your favorite channels: ✍ Your Favorite Channel options can be set automatically or manually. The factory setting for Favorite Channel is Auto. When Favorite Channel is set to Auto, the last eight channels selected with 0-9 buttons will - Sony KP-51HW40 | Operating Instructions - Page 41
left and right pictures. Activating Twin Pictures To display twin pictures 1 Make sure your projection TV is tuned to a working channel. 2 Press . Using the Features Activating the Picture To cancel twin pictures ❑ Press again (or press ). Although two pictures appear on the screen at the same - Sony KP-51HW40 | Operating Instructions - Page 42
one signal at a time, so the right picture will be the same as the left picture. - You can watch a scrambled cable channel and another video source. Be sure your DVD player, VCR or satellite receiver are connected to one of the VIDEO IN 1-6 and AUX inputs on the rear of the projection TV. Pictures - Sony KP-51HW40 | Operating Instructions - Page 43
left) 1 Move the joystick right to activate the right picture (if not already activated). 2 Move the joystick up to enlarge the picture and move the joystick down to reduce the picture. V ✍ When you adjust the twin screen sizes, the projection TV memorizes the change. The next time you use the Twin - Sony KP-51HW40 | Operating Instructions - Page 44
recipes, etc. To use the Freeze function 1 When the program information you want to capture is displayed, press FREEZE. 2 The projection TV switches to Twin View mode and displays the "frozen" picture on the right, while the current program continues on the left. Current program in progress Frozen - Sony KP-51HW40 | Operating Instructions - Page 45
function 1 Press . The current channel will be reduced in size and displayed on the left in normal motion picture format. The first channel is briefly displayed on the bottom-right side of the screen, then frozen. It scrolls up and the next channel appears on the bottom-right, and the process is - Sony KP-51HW40 | Operating Instructions - Page 46
Index Press again to resume normal viewing. ✍ Sound will only be heard from the center picrure. ✍ If one of the pictures received through Scrolling Channel Index is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see "Channel Skip/Add" on page 54) ✍ If you leave - Sony KP-51HW40 | Operating Instructions - Page 47
55. ❑ Press WIDE MODE repeatedly to toggle through the following Wide Mode settings. Wide Zoom enlarges the 4:3 picture, while the upper and lower parts of the picture are condensed to fit the 16:9 screen. z When you change channels or inputs, the Wide Mode settings revert to Wide Zoom (or the - Sony KP-51HW40 | Operating Instructions - Page 48
to make adjustments to your picture settings. 49 It also allows you to customize the Picture Mode based on the type of program you are viewing. Offers enhanced audio options such as listening to second 51 audio programming (SAP), or customizing the Effect of the sound on your projection TV. Allows - Sony KP-51HW40 | Operating Instructions - Page 49
decrease the green tones. Adjust to sharpen or soften the picture. Choose from three color temperatures: Cool Select to give the white colors a blue tint. Neutral Select to give the white colors a neutral tint. Warm Select to give the white colors a red tint (NTSCStandard). (Continued) 49 - Sony KP-51HW40 | Operating Instructions - Page 50
Option DRC Mode Digital Reality Creation Description Creates a high-resolution picture with 4x density, for high quality sources (i.e., DVD player, Satellite receiver). Interlaced Recommended for moving pictures. Progressive Recommended for still images and text. CineMotion Recommended for - Sony KP-51HW40 | Operating Instructions - Page 51
Adjust to increase or decrease lower-pitched sounds. Balance Adjust to emphasize left or right speaker balance. Steady ON Sound Select to stabilize the volume. OFF Select to turn projection TV to second audio programs when a signal is received. (If no SAP signal is present, the projection TV - Sony KP-51HW40 | Operating Instructions - Page 52
Using the Menus Option Speaker Audio Out Easy control of volume adjustments Description ON OFF Variable Fixed Select to turn on the projection TV speakers. Select to turn off the projection TV speakers and listen to the projection TV's sound only through your external audio system speakers. The - Sony KP-51HW40 | Operating Instructions - Page 53
select the desired option. 7 Press MENU to exit the menu screen. Using the Menus Selecting Channel Options The Channel menu includes the set automatically to the last eight channels selected with the 0-9 buttons. Manual Select if you want to input your own selections as Favorite Channel - Sony KP-51HW40 | Operating Instructions - Page 54
Using the Menus Option Description Channel Fix 2-6 Useful when you have a cable box or satellite receiver connected AUX 2-6 "Fix" your projection TV's channel setting to 3 or 4 and use the cable box, VCR or satellite receiver to change channels. Select one of these settings if you have - Sony KP-51HW40 | Operating Instructions - Page 55
the projection TV receives 480i signals. The screen. Select to enlarge the 4:3 picture, while the upper and lower parts of the picture are condensed to fit the wide screen. Select to return the 4:3 picture to normal mode. Select to enlarge the 4:3 picture horizontally only, to fill the wide screen - Sony KP-51HW40 | Operating Instructions - Page 56
. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting Off. Option Vertical Center Description Allows you to move the position of the picture up and down in the window. (Available only in Wide Zoom and Zoom - Sony KP-51HW40 | Operating Instructions - Page 57
press . 4 Press MENU to exit the menu screen. To set the Timer Before setting the timer, be sure to set your projection TV's clock to the current time and Daylight Saving to turn off the Timer. (Your previous settings will be saved.) Set the current time. ON Select in the Spring to adjust the - Sony KP-51HW40 | Operating Instructions - Page 58
Control Allows you to set up the TV to block programs according to their content (for programs that are broadcast with closed captioning). OFF Turns off Caption Vision. CC1, CC2, CC3, CC4 Displays whole screen (if available). For closed captioning, set to CC1. XDS (Extended Data Service) - Sony KP-51HW40 | Operating Instructions - Page 59
Skip VIDEO 5/6 DVD, DTV, HD, Skip If you select "Skip", your projection TV skips this connection when you press TV/VIDEO. ✍ When you select "Receiver" on Video Label, your projection TV's input is fixed. Select to display all on-screen menus in your language of choice: English, Español, Français - Sony KP-51HW40 | Operating Instructions - Page 60
Using the Menus Using the Parent Menu The Parent menu allows you to set up the TV to block programs according to their content and rating levels. These ratings are assigned by a federal rating board. Not all programs are rated. Using the Parental Lock blocks programs with a specific rating, but it - Sony KP-51HW40 | Operating Instructions - Page 61
automatically. If you want to select the ratings from Custom, see "Using Custom Rating Options" on page 63. 10 Press MENU to exit the menu screen. 61 - Sony KP-51HW40 | Operating Instructions - Page 62
Press MENU to exit the menu screen. Viewing Blocked Programs You can view a blocked program by entering the password. 1 Press ENTER when tuned to a blocked program. 2 Enter your password using the 0-9 buttons. Parental Control will be canceled temporarily until you turn your projection TV off. 62 - Sony KP-51HW40 | Operating Instructions - Page 63
Using the Menus Using Custom Rating Options Using the Menus If you want to select the ratings to be blocked from Custom, follow the procedure below. 1 Perform the steps 1 to 8 in "To select the rating" on page 60 to display the Parental Lock options. 2 Move the joystick up or down to select " - Sony KP-51HW40 | Operating Instructions - Page 64
it by moving the joystick up or down, then press . The indicator changes into "-" and all "lower" ratings are unblocked. Some TV ratings have additional content ratings called "extenders." The extenders are defined as follows: D (sexually suggestive Dialog), FV (Fantasy Violence), L (Coarse Language - Sony KP-51HW40 | Operating Instructions - Page 65
that match the ratings you select and higher, except for the extenders that were canceled, will be blocked. 10 Press MENU to exit the menu screen. 65 - Sony KP-51HW40 | Operating Instructions - Page 66
-based ratings should be blocked. z If you choose to block unrated TV programs, please be aware that the following programs may be blocked: emergency broadcasts, political programs, sports, news, public service announcements, religious programs and weather. US custom rating options If you selected - Sony KP-51HW40 | Operating Instructions - Page 67
young children. 13 ans+ Not recommended for ages under 13. 16 ans+ Not recommended for ages under 16. 18 ans+ Programming restricted to adults. See "TV Rating" on page 66 for details. Using the Menus 67 - Sony KP-51HW40 | Operating Instructions - Page 68
Control AV1 AV2 AV3 DVD Programmable Code Number 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the projection TV's remote control, use the following procedures to program the remote control. ✍ The equipment must have infrared (IR) remote capability - Sony KP-51HW40 | Operating Instructions - Page 69
the 0-9 buttons. 5 Press ENTER. 6 To check if the code number works, aim the projection TV's remote control at the component, open the panel, and press the green POWER button. If it to operate your component with the Sony remote control. In this case, use the component's own remote control unit. 69 - Sony KP-51HW40 | Operating Instructions - Page 70
, 308 Toshiba 312, 311 Manufacturer Wards Yamaha Zenith Code 327, 328, 335, 331, 332 314, 330, 336, 337 331 DVD Players Manufacturer Sony Panasonic Pioneer RCA Toshiba Code 751 753 752 755 754 Cable Boxes Manufacturer Hamlin/Regal Jerrold/G. I. Oak Panasonic Pioneer Scientific Atlanta Tocom - Sony KP-51HW40 | Operating Instructions - Page 71
Other Components with Your Projection TV Remote Control Operating a VCR Open the panel and move the slide switch to the AV input you coded for this device. To Do This ... Turn on/off Change channels Record Play Stop Fast forward Rewind the tape Pause Search the picture forward or backward Change - Sony KP-51HW40 | Operating Instructions - Page 72
(FUNCTION) 0-9 buttons, ENTER CH +/- JUMP Operating a Satellite Receiver To Do This ... Turn on/off Select Satellite Receiver Select a channel Change channels Back to previous channel Display channel number Display DBS guide Display DBS menu Move highlight (cursor) Select item Press SAT/CABLE - Sony KP-51HW40 | Operating Instructions - Page 73
television, please call our Customer Information Services Center at 1-800-222-SONY (7669) (U.S. residents only) or (416) 499-SONY (7669) (Canadian residents only). Problem Possible Remedies No picture (screen not lit), no sound ❏ Make sure the projection TV's power cord is connected securely to - Sony KP-51HW40 | Operating Instructions - Page 74
a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings). Cannot operate menu ❏ If the item you want to choose appears in gray, you cannot select it. ❏ Turn the projection TV's power off and on again. Cannot receive any - Sony KP-51HW40 | Operating Instructions - Page 75
channels in either the main picture or the window picture. You may be running all your channels through a cable box. The cable box will only unscramble one signal at a time, so you cannot use the Twin View feature. If possible, run a direct cable to your projection TV's VHF/UHF input (this will - Sony KP-51HW40 | Operating Instructions - Page 76
3 picture tubes, 3 lenses, horizontal in-line system 7-inch high-brightness monochrome tubes (6.3 raster size), with optical coupling and liquid cooling system High performance, large diameter hybrid lens F1.1 75 ohm external terminal for VHF/UHF NTSC, American TV Standard 51 inches (KP-51HW40) 57 - Sony KP-51HW40 | Operating Instructions - Page 77
Other Information Supplied Accessories Remote Control AA (R6) Batteries Optional Accessories AV Cable Audio Cable Control S Cable Component Video Cable AV Receiver RM-Y909 2 supplied for remote control VMC-810/820/830 HG RKC-515HG RK-G69HG VMC-10/30 HG STR-V555ES or equivalent Design and - Sony KP-51HW40 | Operating Instructions - Page 78
DVD MENU button 36 DVD player using with TV remote control 71 with A/V connectors, connecting 27 with component video connectors, connecting 26 E Effect Dolby Virtual51 OFF 51 Simulated 51 Enlarging pictures, in Twin View 43 Extended Data Service 58 F Favorite Channel auto 53 described 8 manual 53 - Sony KP-51HW40 | Operating Instructions - Page 79
, changing 62 PIC MODE button 34 Picture contrast, adjusting 49 Picture size, adjusting in Twin View 43 POWER button 36 POWER buttons (GREEN) 35 Presetting channels 32, 54 Problems, troubleshooting 73 R Ratings setting 60-65 viewing blocked programs 62 Rear panel controls and connections 14, 15 - Sony KP-51HW40 | Operating Instructions - Page 80
36 T Time set current 57 set daylight saving 57 Timer menu 48, 57 Timer setting 57 Treble, adjusting 51 Troubleshooting 73-75 TV function button 35 TV power button 35 TV/VIDEO button 35 Twin View™ activating a picture 41 described 8 using 41 V VCR connecting two, for tape editing 22 using with - Sony KP-51HW40 | Operating Instructions - Page 81
- Sony KP-51HW40 | Operating Instructions - Page 82
- Sony KP-51HW40 | Operating Instructions - Page 83
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
Operating Instructions
© 2001 Sony Corporation
4-084-488-
12
(1)
KP-51HW40
KP-57HW40
Projection TV
Operating Instructions