Sony LBT-ZUX9 Operating Instructions - Page 34
Recording onto a tape
View all Sony LBT-ZUX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Recording onto a tape There are three ways to record on a TYPE I (normal) tape. CD-TAPE Synchro Recording: You can record tracks from AUDIO CDs and MP3 discs onto a tape. The recording level is adjusted automatically. Manual Recording: You can record just the portion you want from an audio source, including connected audio components. Sound Mixing: You can "mix" sound from any one of the audio sources and singing or speaking into a microphone (not supplied). The mixed sound can be recorded onto a tape. 1 Load a recordable tape into Deck B. Be sure to load the tape with the side you want to record facing upward. 2 Prepare the recording source. For CD-TAPE Synchro Recording: Press CD and load the disc you want to record. To record the Press PLAY MODE track from on the remote repeatedly to select the selected disc 1 DISC. an MP3 audio track folder . Then, press +/- repeatedly to select the folder you want. Note You can record tracks on all the discs in the order you want using Program Play. Perform steps 2 to 6 of "Creating your own program" (page 22). When programming, make sure the playing times do not exceed the length of one side of the tape. 34US For Manual Recording and Sound Mixing: Press the function button to select the source you want to record. For Sound Mixing, if you want to record your voice through the microphone only, you can do so by selecting the TAPE A function and not playing any tape. • When recording from a disc, press . or > repeatedly to select a track during recording pauses. • To record a folder of MP3 audio tracks, press PLAY MODE on the remote repeatedly until " " lights up in the display. Then, press +/- repeatedly to select the folder you want. 3 Set Deck B to stand by for recording. For CD-TAPE Synchro Recording: Press CD-TAPE SYNC. "SYNC" and "TAPE" lights up in the display and "REC" flashes in the display. For Manual Recording and Sound Mixing: Press TAPE REC PAUSE/START. "REC" flashes in the display and "TAPE" lights up in the display. 4 Press TAPE REC PAUSE/ START. "REC" lights up in the display. Recording starts. You cannot listen to other sources while recording.