Sony LBT-ZUX9 Operating Instructions - Page 50
Speakers, Cancel the Sleep Timer function
View all Sony LBT-ZUX9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
There is severe hum or noise. • A TV or VCR is placed too close to the unit. Move the unit away from the TV or VCR. • Move the unit away from the source of noise. • Connect the unit to a different wall outlet. • Install a noise filter (commercially available) to the power cord. The timer does not function. • Check the timer setting and set the correct time (page 43). • Cancel the Sleep Timer function (page 43). • You cannot select the Play Timer and the Recording Timer at the same time. The remote does not function. • Remove the obstacles between the remote and the unit. • Move the remote closer to the unit. • Point the remote at the unit's sensor. • Replace the batteries (R6/size AA). • Move the unit away from the fluorescent light. There is acoustic feedback. • Reduce the volume. • Move the microphone away from the speakers or change the direction of the microphone. The sound from the audio source has echo effects. • Press FLANGER, DELAY, CHORUS and AQUA repeatedly to turn off the effector mode. There is beat sound even though you have not played back any source. • Press BEAT ON/OFF to turn off beat pattern. The light illuminated from the FRONT BEAM is too glaring. • Select "F.BEAM OFF" (page 45). • Select "DIMMER 2" in BEAM DIMMER (page 44). • Do not stare at the FRONT BEAM directly. Speakers Sound comes from one channel or unbalanced left and right volume. • Place the speakers as symmetrically as possible. • Check that the speaker are connected securely and correctly. • The source being played back is monaural. • Turn off the X-ROUND mode (page 39). There is no sound from the front speakers. • Check that the front speakers are connected securely and correctly. • Press SPEAKERS repeatedly until "SPEAKERS A+B" or "SPEAKERS A" appears in the display. There is no sound from the surround speakers. • Check that the surround speakers are connected securely and correctly. • Press SPEAKERS repeatedly until "SPEAKERS A+B" or "SPEAKERS B" appears in the display. Sound lacks bass. • Check that the speaker's + and - terminals are connected correctly. 50US