Sony LBT-ZX66i Operating Instructions - Page 36

Tuner, Set CD POWER OFF by CD power - model

Page 36 highlights

Playback does not start from the first track. • The system is in Program Play or Shuffle Play mode. Press PLAY MODE repeatedly until "ALL DISCS", "1 DISC" or " " lights up in the display. The MP3 file can not be played back. • The MP3 file is not recorded in a format that conforms to ISO9660 Level 1/ Level 2, or Joliet (expansion format). • The MP3 file does not have the extension ".mp3". • The MP3 file in format other than MPEG 1, 2 and 2.5 Audio Layer 3 can not be played back. • The system can play back to a depth of 8 folders only. • The disc contains more than 150 folders. • The disc contains more than 300 MP3 files. • MP3 files in MP3 PRO format can not be played back. The MP3 files take a longer time to play back than others. • After the system reads all the files on the disc, playback may take more time than usual if: - the number of folders or files on the disc is very large. - the folder and file organization structure is very complex. The folder name, track name, file name, ID3 tag and CD-TEXT characters do not appear properly. • Use a disc that conforms to ISO9660 Level 1/Level 2, or Joliet (expansion format). • The ID3 tag is not version 1 or version 2. • The character code that can be displayed by this system are as follows: - Upper cases (A to Z) - Lower cases (a to z) - Numbers (0 to 9) - Symbols Other characters may not be displayed correctly. 36US iPod There is no sound. • Make sure the iPod is connected securely. • Make sure the iPod is playing music. • Adjust the volume. • Depending on the contents of the iPod, it may take time to start playback. • You are using an unsupported iPod. See "Compatible iPod models with this system" (page 42) for the supported device types. The sound is distorted. • Reduce the volume. • Set the "EQ" setting of the iPod to "Off" or "Flat". The iPod can not be charged. • Make sure the iPod is connected securely. Tuner There is severe hum or noise. ("TUNED" or "ST" flashes in the display) • Set the proper band and frequency (page 19). • Connect the antenna properly (page 12). • Find a place and an orientation that provide good reception, then set up the antenna again. If you can not obtain good reception, we recommend that you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Locate the antennas as far away from the speaker cords as possible. • Try turning off the surrounding electrical equipment. • Set "CD POWER OFF" by CD power manage function (page 19).

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

36
US
Playback does not start from the first
track.
The system is in Program Play or
Shuffle Play mode. Press PLAY MODE
repeatedly until “ALL DISCS”,
“1 DISC” or “
” lights up in the
display.
The MP3 file can not be played back.
The MP3 file is not recorded in a format
that conforms to ISO9660 Level 1/
Level 2, or Joliet (expansion format).
The MP3 file does not have the
extension “.mp3”.
The MP3 file in format other than
MPEG 1, 2 and 2.5 Audio Layer 3 can
not be played back.
The system can play back to a depth of
8 folders only.
The disc contains more than 150 folders.
The disc contains more than 300 MP3
files.
MP3 files in MP3 PRO format can not
be played back.
The MP3 files take a longer time to
play back than others.
After the system reads all the files on the
disc, playback may take more time than
usual if:
– the number of folders or files on the
disc is very large.
– the folder and file organization
structure is very complex.
The folder name, track name, file
name, ID3 tag and CD-TEXT
characters do not appear properly.
Use a disc that conforms to ISO9660
Level 1/Level 2, or Joliet (expansion
format).
The ID3 tag is not version 1 or version 2.
The character code that can be displayed
by this system are as follows:
– Upper cases (A to Z)
– Lower cases (a to z)
– Numbers (0 to 9)
– Symbols (< > * +, ? / [ ] \ _)
Other characters may not be displayed
correctly.
iPod
There is no sound.
Make sure the iPod is connected
securely.
Make sure the iPod is playing music.
Adjust the volume.
Depending on the contents of the iPod,
it may take time to start playback.
You are using an unsupported iPod. See
“Compatible iPod models with this
system” (page 42) for the supported
device types.
The sound is distorted.
Reduce the volume.
Set the “EQ” setting of the iPod to “Off”
or “Flat”.
The iPod can not be charged.
Make sure the iPod is connected
securely.
Tuner
There is severe hum or noise.
(“TUNED” or “ST” flashes in the
display)
Set the proper band and frequency
(page 19).
Connect the antenna properly (page 12).
Find a place and an orientation that
provide good reception, then set up the
antenna again. If you can not obtain
good reception, we recommend that you
connect a commercially available
external antenna.
The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Locate the antennas as far away from
the speaker cords as possible.
Try turning off the surrounding
electrical equipment.
Set “CD POWER OFF” by CD power
manage function (page 19).