Sony LBT-ZX66i Operating Instructions - Page 37

Additional Information A stereo FM program can not be received in stereo. • Press FM MODE repeatedly until "MONO" disappears from the display. Optional components There is no sound. • See general item "There is no sound." (page 34) and check the condition of the system. • Connect the component properly (page 11) while checking: - if the cords are connected properly. - if the cord plugs are firmly inserted all the way. • Turn on the connected component. • Refer to the operating instructions supplied with the connected component and start playing. To reset the system to factory settings If the system still does not operate properly after performing the above measures or other troubles not described above occur, reset the system as follows: Use the buttons on the unit for the operation. 1 Unplug the power cord. 2 Plug the power cord back in. 3 Press "/1 to turn on the system. 4 Press M (iPod), TUNING MODE and "/1 at the same time. "COLD RESET" appears in the display. The system is reset to the factory settings. You need to readjust all the settings you made, such as the preset stations, clock and timer. Messages One of the following messages may appear or flash in the display during operation. No Disc There is no disc on the disc tray or you have loaded a disc that can not be played back on this system. Not in Use You have pressed a button those operation is not allowed or invalid at that time. OFF TIME NG! The on time and off time of Play Timer is the same. PUSH SELECT! You tried to set the clock or timer during timer operation. Push STOP! You have pressed PLAY MODE during playback. Reading The system is reading information of the disc. Some buttons are not available. NO STEP You have cleared all the steps you programmed. OVER You have reached the end of the disc while pressing M during playback or pause. Step Full! You tried to program more than 25 steps. 37US