Sony LBT-ZX66i Operating Instructions - Page 39

Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: LBT-ZX99i USA model only With 6-ohm loads, both channels driven, from 120 Hz - 10 kHz; rates 200 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output. LBT-ZX66i USA model only With 6-ohm loads, per channel driven, from 120 Hz - 10 kHz; rates 220 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 miliwatts to rated output. Amplifier section LBT-ZX99i (HCD-ZX99i) The following are measured at AC 120 V, 60 Hz Front/Surround speaker Power output (rated): 270 W + 270 W (at 6 Ω, 1 kHz, 10% THD) RMS output power (reference): 180 W × 2 + 180 W × 2 (6 Ω at 1 kHz, 10% THD) LBT-ZX66i (HCD-ZX66i) The following are measured at AC 120 V, 60 Hz Front speaker Power output (rated): 280 W (at 6 Ω, 1 kHz, 10% THD) RMS output power (reference): 210 W × 2 (6 Ω at 1 kHz, 10% THD) Inputs PHONO IN L/R: Sensitivity 3 mV, impedance 47 kilohms MIC 1/MIC 2: Sensitivity 1 mV, impedance 10 kilohms GAME INPUT AUDIO L/R: Sensitivity 250 mV, impedance 47 kilohms GAME INPUT VIDEO: 1 Vp-p, 75 Ω PC IN L/R: Sensitivity 250 mV, impedance 47 kilohms Outputs PHONES: accepts headphones of 8 Ω or more VIDEO OUT: max. output level 1 Vp-p, load impedance 75 ohms Disc player section System Compact disc and digital audio system Laser Semiconductor laser (λ = 780 nm) Emission duration: continuous Laser Output Max. 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response 2 Hz - 20 kHz (±1.0 dB) Wave length 780 - 790 nm Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB CD DIGITAL OUT OPTICAL: Wave length 660 nm, output level -18 dBm Continued l 39US Additional Information