Sony LFB10 Quick Start
Sony LFB10 Manual
 |
View all Sony LFB10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony LFB10 manual content summary:
- Sony LFB10 | Quick Start - Page 1
11(1) Quick Start Guide LocationFree Base Station LF-B10 * For more details, please refer to the Operating Instructions installed on the CD-ROM which is enclosed in the package. Sony, LocationFree, and the LocationFree logos are trademarks of Sony. "PlayStation" and "PSP" are registered trademarks - Sony LFB10 | Quick Start - Page 2
is located on the side of the LocationFree Base Station. Model No. LF-B10 Serial No Contacting Sony If, after reading these operating instructions, you have additional questions related to the use of your Sony LocationFree Base Station, please call our LocationFree Customer Support at LocationFree
-
1 -
2
 |
 |
6
Make sure that the NETWORK LED lights in green.
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
NETWORK
The LED will light in green
Note
The NETWORK LED will flash in green while the IP address is being obtained.
Obtaining the IP address may take a while.
7
Make sure that the SETUP MODE/NET AV LED turns off.
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
SETUP MODE/
NET AV
The LED will be turned off
The flashing SETUP MODE/NET AV LED will be turned off when you complete the settings for watching video
content from the LocationFree Base Station on the go.
Note
The settings of the Base Station is incomplete when the SETUP MODE/NET AV LED lights in orange.
Please read the Operating Instructions installed on the CD-ROM which is enclosed in the package.
When you use your PC as a LocationFree client device:
(1) Install the LFA-PC20 LocationFree Player software on your PC and
(2) Follow the setup wizard to complete the settings for accessing the Base Station outside of your home/on the go.
This concludes your Base Station configuration and setup. You now should be able to view the video content fed to
your Base Station inside and outside of your home.
1
Attach the LocationFree Base Station stand to the
LocationFree Base Station.
Stand
Slit
Hook
2
Connect the LocationFree Base Station to your audio/video devices.
Video Output
Video Input 1 or 2
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
IN 1
IN
VIDEO
AUDIO
L
R
S VIDEO
OUT
VIDEO
AUDIO
L
R
OUT
S VIDEO IN
VIDEO IN
AUDIO IN
L
R
S VIDEO OUT
VIDEO OUT
AUDIO OUT
L
R
IR BLASTER
1
2
S VIDEO IN
VIDEO IN
AUDIO IN
L
R
Using the composite audio/video and the S-Video cables, connect the video
devices such as STB and DVR to the composite audio/video and S-Video
output jacks on the back of the Base Station.
Video signal from the video device, which is plugged to Video Input 1 on the backside of
the LocationFree Base Station, will be emitted through Video Output.
TV, etc.
Video Input
Video Output
(Video signal from
Video Input 1 will
be emitted)
The backside of the
LocationFree Base Station
Connect the Base Station to your video devices such as a set-top box (STB),
DVD or DVR.
Connect the LocationFree Base Station to your STB, DVD or DVR.
Connect the IR blaster to the IR blaster
connector on the backside of the LocationFree
Base Station to configure the on-screen remote
control.
After you complete the settings, please turn
on the video devices.
STB, DVD, and DVR
IR blaster
Remote control
infrared transmitter
Remote control
infrared receiver
Tips
Orient the infrared
transmitter of the end
of the IR blaster so that
it faces the infrared
receiver(s) on your
DVR, DVD and STB.
IR blaster port 1 or 2
Both ports are available
or
IR blaster
Remote control
infrared receiver
or
5
Turn on the power.
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
The POWER
LED will light
in green
POWER LED
4
Plug in the power cord.
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
DC IN 12V
Power cord (enclosed)
AC power adapter (enclosed)
2-889-814-
11
(1)
Quick Start Guide
LocationFree Base Station
LF-B10
Before you start setting up the LocationFree Base
Station, please check the followings
Note:
Please be sure to handle the information
with care, which is necessary for registering
your device(s) with the Base Station.
Disclosing such information to stranger(s)
may result in allowing them to access your
Base Station without your permission. For
more details about this, please refer to the
Operating Instructions which is installed on
the LFA-PC20 LocationFree Player CD-
ROM.
Preparing LocationFree client device(s)
Please prepare one of the following LocationFree client devices (some of the client devices listed below
may require a LFA-PC20 LocationFree Player software which is enclosed in the package).
Windows PC
Please install the LFA-PC20 LocationFree Player software, which is enclosed in the package, on your
PC.
PSP® (PlayStation® Portable)
Please upgrade the software installed on a PSP® to the latest version.
Please refer to the following website for more details about other LocationFree client devices.
URL: sony.com/locationfree
Other necessary items
LAN cable
Use the LAN cable to connect the LocationFree Base
Station to your router.
Composite audio / video cable
Use the composite audio/video cable to connect the
LocationFree Base Station to your audio / video devices.
Broadband router
A broadband router is recommended for viewing the
content from the Base Station on your LocationFree client
devices. A UPnP-enabled router is also recommended for
accessing the Base Station via the Internet (Please visit
our website for more details: sony.com/locationfree).
Check the content of the package
LF-B10 LocationFree
Base Station
AC-LX1B AC adapter
Power cord
LocationFree Base
Station stand
LFA-PC20 LocationFree
Player software CD-ROM
(it includes the
Operating Instructions
and a serial key)
IR blaster
Quick Start Guide
Warranty
* For more details, please refer to the Operating Instructions installed
on the CD-ROM which is enclosed in the package.
Sony, LocationFree, and the LocationFree logos are trademarks of Sony.
“PlayStation” and “PSP” are registered trademarks of Sony Computer Entertainment Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries.
All other company names and product names mentioned here may be the trademarks or registered trademarks of their
respective companies.
The symbols for ™ and ® are omitted in these instructions.
©2006 Sony Corporation
Printed in Japan
Install the LocationFree Player Software
Before you install the Player software, please make sure that your PC and the Base Station are connected with the same router.
3
After the software installation is completed, double-click the “LocationFree Player” icon which appears on the desktop of your PC.
The LocationFree Player starts up and the setup wizard starts.
4
By following the setup wizard, register your PC to the Base Station and specify your video device(s) connected to the Base Station through the on-screen remote control setup pages
to control those devices with the on-screen remote control on your PC.
1
Insert the CD-ROM to your computer.
Software installation begins automatically.
2
Install the LocationFree Player by following the on-screen installation instructions.
How to use this guide
LF-B10 LocationFree
Base Station
IR Blaster
LAN cable
Router
STB, DVR
Composite audio/
video (white, red and
yellow plugs) cable
PC
Wired LAN/
Wireless LAN/
Internet
Connecting / Setting up the LocationFree Base Station
Connect the LocationFree Base Station to your audio/video devices and to your network based on this
guide.
For connecting your devices to the Base Station and configuring your devices, please refer to the
Operating Instructions installed on the CD-ROM which is enclosed in the package.
If you would like to use this product with a Windows PC, please follow the instructions on this document,
installing the LocationFree Player software and completing the settings.
For connecting other devices to the Base Station, please refer to the Operating Instructions.
Connecting the Base Station
For Help
Please refer to the Operating Instructions for LF-B10 or LFA-PC20 on your PC desktop, contact
the LocationFree Customer Support or visit our website at: sony.com/locationfree
Contact information for the LocationFree Customer Support
Product detalis
(Product name)
3
Connect your router with the Base Station based on one of the following methods.
A. Connect your router with the Base Station using a LAN cable
B. Connect your router with the Base Station using a Powerline Ethernet adapter
C. Connect your router with the Base Station using a wireless router
LAN
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
LAN cable (not enclosed)
Router
To LAN port
LAN
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
To LAN port
Powerline
Ethernet adapter
(not enclosed)
Router
LAN cable
(not enclosed)
LAN cable
(not enclosed)
LAN
IR BLASTER
LAN
1
2
S VIDEO
IN 1
IN
OUT
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
VIDEO
DC IN 12V
AUDIO
L
R
IN 2
OUT
LAN cable
(not enclosed)
Wireless router
Wireless Network
adapter (not enclosed)