Sony LMD-XH550MD Operating Instructions
Sony LMD-XH550MD Manual
 |
View all Sony LMD-XH550MD manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony LMD-XH550MD manual content summary:
- Sony LMD-XH550MD | Operating Instructions - Page 1
5-052-059-11(1) 2023-06 LCD Monitor Instructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-XH550MD © 2023 Sony Corporation - Sony LMD-XH550MD | Operating Instructions - Page 2
or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. No modification of this equipment is allowed. Warning plug. Symbols on the product Consult the instructions for use Follow the directions in the instructions for use for parts of the unit on - Sony LMD-XH550MD | Operating Instructions - Page 3
have any questions about this product, you may call; Sony Customer Information Service Center 1-800222-7669 or http://www.sony.com/ Supplier’s Declaration of . If it is not installed and used in accordance with the instruction manual, it may cause interference on other devices. If the unit causes - Sony LMD-XH550MD | Operating Instructions - Page 4
environments • The LMD-XH550MD needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the instructions for use. • The LMD-XH550MD is intended for use in a professional healthcare facility environment. • Portable and mobile - Sony LMD-XH550MD | Operating Instructions - Page 5
Surge IEC 61000-4-5 Voltage dips, short interruptions and voltage variations on power supply input lines IEC 61000-4-11 Power frequency (50/60 Hz) magnetic field ±1 kV line(s) to line(s) ±2 kV line(s) to earth 0% UT (100% dip in UT) for 0.5/1 cycles a 40% UT (60% dip in UT) for 5 cycles ±1 kV - Sony LMD-XH550MD | Operating Instructions - Page 6
Guidance and manufacturer’s declaration – electromagnetic immunity The LMD-XH550MD is intended for use in the electromagnetic environment specified below. The customer or the user of the LMD-XH550MD should assure that it is used in such an environment. Immunity test IEC 60601 test level - Sony LMD-XH550MD | Operating Instructions - Page 7
a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF - Sony LMD-XH550MD | Operating Instructions - Page 8
30 cm (12 inches) to any part of the LMD-XH550MD. Otherwise, degradation of the performance of this equipment could result. Immunity test Band a Service a Modulation IEC 60601 test level Compliance level 380 – 390 MHz TETRA 400 Pulse modulation 18 Hz 27 V/m 27 V/m 430 – 470 MHz GMRS 460 - Sony LMD-XH550MD | Operating Instructions - Page 9
above Power Cord / Appliance Connector / Plug, please consult a qualified service personnel. Warning on power connections for medical use Customers in the the instruction manual provided with the mounting device. Check beforehand that the mounting device used has sufficient strength to support the - Sony LMD-XH550MD | Operating Instructions - Page 10
customers in Europe Sony Europe B.V. - Standard Warranty and Exceptions on Standard Warranty. Please visit https://pro.sony/support-services/ primesupport/support-professional-solutionseurope-standard-product-warranty for important information and complete terms and conditions. For the customers in - Sony LMD-XH550MD | Operating Instructions - Page 11
menu 29 PIP / POP menu 29 Input/Output Configuration menu ..... 30 System Configuration menu 30 Initial Setup menu 32 Preset menu 33 Troubleshooting 33 Error Messages 34 Specifications 34 Dimensions 40 Licenses 41 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI - Sony LMD-XH550MD | Operating Instructions - Page 12
Precaution On Safety Operate the unit only with a power source as specified in the "Specifications" section. The nameplate indicating operating voltage, etc. is located on the rear panel of monitor and the AC adaptor. Should any solid object or liquid fall into the cabinet, unplug the unit and - Sony LMD-XH550MD | Operating Instructions - Page 13
. In addition, over a long period of use, because of the physical characteristics of the liquid crystal display, such "stuck" pixels may appear spontaneously. These problems are not a malfunction. Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place - Sony LMD-XH550MD | Operating Instructions - Page 14
equipment, operate the connected equipment accordingly. For details, refer to the operation manual of the connected equipment. Turn off the power when not in use Turn UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND. Depending on the operating - Sony LMD-XH550MD | Operating Instructions - Page 15
method and then clean using the above chemical solution. Never use solvents such as benzene or thinner, or acid, alkaline or abrasive detergent, or chemical cleaning cloth for cleaning or disinfection, as they will damage the protection plate surface/monitor surface. Do not use unnecessary force - Sony LMD-XH550MD | Operating Instructions - Page 16
Flat surface for better maintenance The design allows the user to easily wipe liquids and gel off the LCD panel and control buttons - ensuring a high standard of disinfection and cleanliness. 16 - Sony LMD-XH550MD | Operating Instructions - Page 17
Location and Function of Parts and Controls Front Panel Power indicator Indicator Green Flashes in Green Orange Flashes in Orange Operating State Power on Power on with image displayed (reduced backlight due to high temperature) Standby No image displayed (remote standby) (On)/ (Standby) - Sony LMD-XH550MD | Operating Instructions - Page 18
CUSTOM buttons Turns on or off the assigned function. You can adjust the assigned function by pressing the / buttons. (Refer to the Custom Button of the System Configuration menu on page 32 and of the Initial Setup menu on page 33.) The following functions are assigned in the default setting. - Sony LMD-XH550MD | Operating Instructions - Page 19
Input Signals and Adjustable/Setting Items Item HDMI Gamma Phase Chroma Brightness Contrast A.I.M.E. A.I.M.E. Structure A.I.M.E. Color A.I.M.E. Shadow Color Temperature Gain R/G/B Offset Bias R/G/B Offset Mono Sharpness H Sharpness V RGB Range Color Space 4K Scan Size HD Scan Size SD Scan Size 4K - Sony LMD-XH550MD | Operating Instructions - Page 20
Rear Panel To use the connectors on the rear panel, remove the cable cover. For details on the cable cover, see page 23. Cable cover (L) When connecting or disconnecting the cable of the connector on the rear panel, remove this cover. Make sure to disconnect the power cord before connecting or - Sony LMD-XH550MD | Operating Instructions - Page 21
connector to peripheral device wiring that might have excessive voltage. Follow the instructions for use for this port. Caution Do not come into contact with this Port signal. Display Port is an interface developed by VESA that supports transfer of both video and audio digital signals on a single - Sony LMD-XH550MD | Operating Instructions - Page 22
OUT connector. Be sure to connect equipment or cables specified by Instructions for Use of this monitor to the CLONE OUT connector. If you connect connector, Display Port input connector, and DVI-D input connector support HDCP, a copy protection technology that incorporates coding technology for - Sony LMD-XH550MD | Operating Instructions - Page 23
Preparation Connecting 1 Make sure that the (On)/ (Standby) switch is set to (Standby). 2 Remove the cable cover (L). Slide down the cable cover (L) while sliding the slide locks (2 pcs), which are located at the bottom of the monitor, in the direction of the arrow. Cable cover (L) AC input - Sony LMD-XH550MD | Operating Instructions - Page 24
6 Attach the cable cover (L). Slide the cable cover (L), while sliding the slide locks (2 pcs), which are located at the bottom of the monitor, in the reverse direction of step2. Notes After attaching the cable cover (L), check that the slide locks (2 pcs) return to the original position. The - Sony LMD-XH550MD | Operating Instructions - Page 25
Initial Setting When you turn on the unit for the first time after purchasing it, select the area and language where you intend to use this unit. To set the using area 1 Turn on the unit. The Area Setting screen appears. If you have selected the wrong area, change the Color Temperature setting ( - Sony LMD-XH550MD | Operating Instructions - Page 26
Using the Menu The unit is equipped with an on-screen menu for making various adjustments and settings such as picture control, input setting, setting change, etc. 1 Press the CONTROL button. The operation buttons are displayed. 2 Press the MENU button. The menu-selecting screen appears. The menu - Sony LMD-XH550MD | Operating Instructions - Page 27
About the control navigation Depending on the state, the operation buttons of the unit light as shown below: White light: Operable state. Green light: Operating state. Off: Unable to operate. Adjustment Using the Menus Items The screen menu of this monitor consists of the following items. Color - Sony LMD-XH550MD | Operating Instructions - Page 28
Input Name AUX IN Setting Power Supply System Configuration (page 30) Control Lock OSD Setting Power On Setting Power Save Serial Remote Remote Ethernet Setting Custom Button Panel Display A.I.M.E. Setting Monitor Information Initial Setup (page 32) Language Port A Input Select Port B Input Select - Sony LMD-XH550MD | Operating Instructions - Page 29
Menu RGB Range Color Space Setting Select the RGB signal range from "Auto," "Limited," or "Full." If you set to "Auto," this item is set to "Limited" when inputting video signals, and "Full" when inputting PC signals. Select the color gamut from "Auto," "BT.709," or "BT.2020." "Auto" is available - Sony LMD-XH550MD | Operating Instructions - Page 30
Menu POP Pattern Skip Setting Sets the sub screen position for the 2 or 3 screens display (POP). Sets the pattern that is skipped when changing the displaying pattern by pressing the PIP/POP button on the front panel or the Foot Switch while displaying 2 or 3 screen displays. Set to "Not Skip" or " - Sony LMD-XH550MD | Operating Instructions - Page 31
Menu Setting Input Connector Name Select Port Control Lock Signal Format Scan Size/ 4K Zoom Flip Pattern A.I.M.E. PIP/POP Mode Energy Saving Mode Auto: The format and scan mode are displayed temporarily when the content of Status Display is changed. On: The format and scan mode are always - Sony LMD-XH550MD | Operating Instructions - Page 32
Menu Remote Remote Mode Ethernet Setting Custom Button Panel Display Backlight Setting Sets the remote function when the REMOTE connector is connected to the optional Foot Switch FS-24. Off: Inactivates the remote function. Port A/B: Switches between PORT A and PORT B. PIP / POP: Switches - Sony LMD-XH550MD | Operating Instructions - Page 33
data that is set for the default preset settings. Troubleshooting This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. "Unknown" or "Out Of Range" is displayed. Input the supported signal (page 37). The monitor cannot be - Sony LMD-XH550MD | Operating Instructions - Page 34
Error Messages When the following messages appear on the screen, turn off the power and contact an authorized Sony dealer. Messages Fan Error Temperature Error Description A malfunction occurs in the fan. The temperature of this unit has increased. Specifications Picture performance LCD panel - Sony LMD-XH550MD | Operating Instructions - Page 35
supplied AC power cord (1) Plug holder for the supplied AC power cord (2) Before Using This Unit (1) CD-ROM (including the Instructions for Use) (1) Service Contact List (1) Information for Customers in Europe (1) M6 × 12 screws (4) Optional accessories Foot Switch FS-24 Caution Do not - Sony LMD-XH550MD | Operating Instructions - Page 36
Pin assignment SERIAL REMOTE (RS-232C) connector D-sub 9-pin, female Pin number 1 2 3 4 5 6 7 8 9 Signal NC RX TX NC GND NC NC NC NC REMOTE (stereo mini jack) connector 12V 2.5A (DC output) connector Pin number 1 2 3 4 Signal GND NC 12 V NC Pin number 1 2 3 Signal GND On (short to sleeve) - Sony LMD-XH550MD | Operating Instructions - Page 37
1/1.001. 2) The signal 720×487/60I is described as "480/60i" with the signal format of OSD menu in this manual. 3) This signal is described as "4K equivalent signal" in this manual. Signal format 640×480/60p 1) 720×480/60p 1) 1280×720/60p 1) 1920×1080/60i 1) 720×576/50p 4 : 4 : 4 RGB 10bit/8bit - Sony LMD-XH550MD | Operating Instructions - Page 38
Signal format 1280×720/50p 1920×1080/50i 1920×1080/60p 1) 1920×1080/50p 3840×2160/60p 1) 3) 3840×2160/50p 3) 3840×2160/30p 1) 3) 3840×2160/25p 3) 4096×2160/60p 1) 3) 4096×2160/50p 3) 4096×2160/30p 1) 3) 4096×2160/25p 3) 800×600/60p 4) 1024×768/60p 4) 4 : 4 : 4 RGB 10bit/8bit 4 : 4 : 4 YCbCr 10bit/ - Sony LMD-XH550MD | Operating Instructions - Page 39
DVI 2 × 1) Also compatible with the frame rate 1/1.001. 2) DVI-D input is supported only for 8bit. 3) This signal is described as "4K equivalent signal" in this manual. 4) This signal is described as "Computer signal" in this manual. PC signal (DVI) Range of DVI input signal (Compatible with up - Sony LMD-XH550MD | Operating Instructions - Page 40
Dimensions Front Rear Unit: mm (inches) Warning Be sure to set the tightening torque value to the following value. Torque value: 1.7±0.1 N·m Make sure the tightening torque value is at this value. If the torque value is not appropriate, the mounting part may become damaged or the screws may - Sony LMD-XH550MD | Operating Instructions - Page 41
Licenses For details on the license, refer to "Software License Information" on the CD-ROM. 41 - Sony LMD-XH550MD | Operating Instructions - Page 42
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
 |
 |
5-052-059-
11
(1)
LCD Monitor
Instructions for Use
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
LMD-XH550MD
© 2023 Sony Corporation
2023-06