Sony LMDDM20/BNDL User Manual (LMD-DM20, DM30, DM50 User Manual)
Sony LMDDM20/BNDL Manual
View all Sony LMDDM20/BNDL manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony LMDDM20/BNDL manual content summary:
- Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 1
4-421-015-11 (1) LCD Display Instructions for Use Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-DM50 LMD-DM30 LMD-DM20 © 2012 Sony Corporation - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 2
in accordance with the instructions, may cause harmful not expressly approved in this manual could void your authority to Sony Customer Information Service Center 1-800-2227669 or http://www.sony.com/ Declaration of Conformity Trade Name : SONY Model : LMD-DM50/DM30/DM20 Responsible party : Sony - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 3
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters please refer to the addresses given in separate service If it is not installed and used in accordance with the instruction manual, it may cause interference to other equipment. If this unit - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 4
Important EMC notices for use in the medical environments • The LMD-DM50/DM30/DM20 needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in this instructions for use. • The portable and mobile RF communications equipment such - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 5
should be that of a typical commercial or hospital environment. If the user of the LMD-DM50/DM30/ DM20 requires continued operation during power mains interruptions, it is recommended that the LMD-DM50/DM30/ DM20 be powered from an uninterruptible power supply or a battery. 70% UT (30% dip in - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 6
survey should be considered. If the measured field strength in the location in which the LMD-DM50/DM30/DM20 is used exceeds the applicable RF compliance level above, the LMD-DM50/DM30/ DM20 should be observed to verify normal operation. If abnormal performance is observed, additional measures may - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 7
use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the LMD-DM50/DM30/DM20 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (Transmitters) and the - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 8
Switching the Input Source 22 Switching Configuration Data 23 Operating the Menu with No Image Input ....... 24 Using a USB Hub 25 Connector Pin Assignment 26 Troubleshooting 28 Attaching an Arm Stand 29 Anti-Theft Security Slot 30 Specifications 30 Dimensions 32 8 Table of Contents - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 9
Precaution On Safety • Operate the unit only with a power source as specified in the "Specifications" section. • A nameplate indicating operating voltage, etc., is located on the rear panel. • Should any solid object or liquid fall into the cabinet, unplug the unit and have it checked by qualified - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 10
authority. Recommendation to Use More Than One Unit As problems can occasionally occur with the unit, if it is Sony dealer clean the unit's interior at least once a year. About this manual The instructions in this manual are for the following three models: • LMD-DM50 • LMD-DM30 • LMD-DM20 The LMD - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 11
Max. viewing angle* LMD-DM50 LMD-DM30 LMD-DM20 1,100 cd/m2 1,000 cd/m2 1,800 cd/m2 850:1 (typ) 900:1 (typ) 85°/85°/85°/85° 700:1 (typ) * LMD-DM50: up/down/left/right, contrast ≥ 20:1 LMD-DM30/DM20: up/down/left/right, contrast ≥ 10:1 Dual-link support (LMD-DM50/DM30) This unit has a dual - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 12
software-dependent pivoting, much faster with less noise. Note Portrait orientation requires a graphics card supporting the resolutions below. LMD-DM50: 2048 × 2560 LMD-DM30: 1536 × 2048 LMD-DM20: 1200 × 1600 Interchangeable stand The tilt stand is interchangeable with arm stands featuring a mount - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 13
ON Standby ON Advanced power save mode ON Error detected. Turn off the unit and consult your Sony dealer. ON Error detected. Turn off the unit and consult your Sony dealer. c LCD luminance sensor Monitors the LCD luminance. d Ambient light sensor Monitors the ambient light in the - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 14
Rear Panel a + (plus) button Press to display the information (or present operating state) screen. (page 19) b - (minus) button Press to display the information (or present operating state) screen. (page 19) c DOWN (USB downstream) ports (×2) Connect the calibration sensor supplied with the optional - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 15
Adjusting the Stand Height The tilt stand is locked at the factory. Follow the instructions below to adjust the stand height. 1 Press the tip of the metal rod tool until it clicks. The (spring-loaded) tip of the tool will - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 16
optional calibration kit, connect the supplied USB cable between the unit's UP port and the computer's USB port. For details about connections, refer to the instruction manual for the calibration kit. 16 Removing the Connector Cover / Connecting the Cables - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 17
Routing the Cables The cables can be stowed along the tilt stand under the cable cover. 1 Lift the hook at the top of the cable cover, then remove the cable cover from the tilt stand. Hook 2 Secure the cables along the groove at the rear of the tilt stand, and put the cable cover back in place. - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 18
the angle slowly. 17° 70° Switching the LCD Panel Orientation The LCD panel is locked in portrait orientation when packed at the factory. Follow the instructions below to switch the LCD panel orientation. 1 Unlock the tilt stand. For details how to unlock the tilt stand, see page 15. 2 Tilt the LCD - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 19
4 Rotate the LCD panel 90°. Displaying the Information Screen 5 Lower the LCD panel to the desired height. 6 Lock the tilt stand. For details how to lock the tilt stand, see page 15. 7 After switching the LCD panel orientation, restart the computer and reset the resolution for the display - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 20
more than 2 seconds. The SWITCHING EDID screen appears. From the on-screen menu, you can change the four settings below. For detailed instructions on each setting, see the following pages. SWITCHING EDID "Fixing the Display Orientation" (page 20) SWITCHING DISPLAY MODE "Switching the Display Mode - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 21
Drive) technology. LMD-DM20 • 2M-normal mode (270 µm pixel pitch) • ISD mode (90 µm pixel pitch in the sub-pixel chain direction) developed by the ISD (Independent Subpixel Drive) technology. The default setting is the ISD mode. If you use the normal mode, follow the instructions below to switch - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 22
as Normal, or ISD. For details, consult your Sony dealer. Switching the Input Source Follow the instructions below to switch the input source. 1 Press either that input source regardless of the setting. Digital input The unit supports only digital signals. It is normal for noise to occur during - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 23
is "1." Follow the instructions below to switch the configuration data. LMD-DM50/DM30 Configuration number Luminance (cd/m2) Max. Min. Ambient Light Gamma 1 410 0.8 0.0 (default) DICOM GSDF 2 410 1.0 0.0 DICOM GSDF 3 500 0.8 0.0 DICOM GSDF LMD-DM20 Configuration number Luminance - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 24
4 Press either the + or - button to move the B (cursor), and select a configuration number. r r Operating the Menu with No Image Input If no signal is input, the unit usually enters the standby mode due to the power management function. Normal power can be temporarily restored for menu operations - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 25
unit directly. Notes • This USB hub is only for use with an LMD-DM series LCD Display and the optional calibration sensor. • Proper operation of USB down (USB downstream) port. For more information, refer to the instruction manual for the calibration kit. To calibrate multiple units in a chain Up to - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 26
3+* +5 V Power GND Hot Plug Detect TMDS Data 0- TMDS Data 0+ TMDS Data 0/5 Shield TMDS Data 5-* TMDS Data 5+* TMDS Clock Shield TMDS Clock+ TMDS Clock- * (NC) for LMD-DM20 26 Connector Pin Assignment - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 27
connector 1 4 Pin number 1 2 3 4 Functions VCC -DATA +DATA GND Available display resolution Normal mode (pixel × pixel) ISD mode (pixel × pixel) LMD-DM50 LMD-DM30 LMD-DM20 VGA to XGA (regardless) 2048 × 2560 1536 × 2048 1200 × 1600 2560 × 2048 2048 × 1536 1600 × 1200 2048 × 7680 1536 - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 28
cursor does not move smoothly. • Check the refresh rate (Fv) of the display mode. The following setting will enable smooth movement: Fv = 50 Hz for LMD-DM50 Fv = 60 Hz for LMD-DM30/DM20 For details about the setting method, refer to the instruction manual for the graphics card. 28 Troubleshooting - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 29
to the plate thickness. Mounting plate thickness Screw size 3.5 - 4.5 mm ISO M4 × 12 1.5 - 3.5 mm ISO M4 × 10 (Originally used) Below 1.5 mm ISO M4 × 8 Sony is not liable for any damage or injury resulting from changing stands. How to attach an arm stand 1 Place a soft cloth or cushioning - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 30
The unit is equipped with a security slot supported by MicroSaver Security Lock System by Kensington Technology Group LMD-DM50 LMD-DM30 LMD-DM20 1,100 cd/m2 1,000 cd/m2 1,800 cd/m2 850:1 (typ) 900:1 (typ) 85°/85°/85°/85° 700:1 (typ) * LMD-DM50: up/down/left/right, contrast ≥ 20:1 LMD-DM30/DM20 - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 31
LMD-DM50/ DM30) (1) DVI cable (Single link) (LMD-DM20) (1) USB cable (1) CD-ROM (1) Before Using this Unit (1) Sales Companies Guide (1) Optional accessories Calibration Kit LMD-KT10 Display Network Manager LMD unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 32
) Side (portrait) 390 (15 3/8) 522.2 (20 5/8)/583.7 (23) 220 (8 3/4) Front (landscape) 474.5 (18 3/4) 32 Dimensions Side (landscape) 479.9 (19)/541.4 (21 3/8) 30.7 (1 1/4) LMD-DM30/DM20 Front (portrait) 103.5 (4 1/8) Side (portrait) 367 (14 1/2) 521.9 (20 5/8)/583.4 (23) 220 (8 3/4) - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 33
Front (landscape) 474 (18 3/4) Side (landscape) 468.4 (18 1/2)/529.9 (20 7/8) 38.7 (1 9/16) 95.5 (3 7/8) Unit: mm (inches) 33 Dimensions - Sony LMDDM20/BNDL | User Manual (LMD-DM20, DM30, DM50 User Manual) - Page 34
Sony Corporation
LCD Display
4-421-015-
11
(1)
© 2012 Sony Corporation
Instructions for Use
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
LMD-DM50
LMD-DM30
LMD-DM20