Sony LSPX-102E26 Startup Guide

Manuals Supplied

Startup Guide (this document)

Provides you with instructions on how to

connect the unit with BLUETOOTH devices

and basic operations.

Reference Guide

Provides you with precautions and product

specifications.

Help Guide

Read the Help Guide on your computer or

smartphone when you want to know how

to use the unit in greater detail. The Help

Guide also contains a troubleshooting

guide which provides you with remedies

for the problems you might encounter.

URL:

http://rd1.sony.net/help/speaker/

lspx-102e26/h_zz/

Two-dimensional code:

Parts and Controls

Main unit



Screw base



Remote receiver



Speaker

Remote control

(rear)



Battery cover



Remote control transmission area

To operate, aim towards the remote receiver on the

main unit as illustrated.

Remote receiver





(play/pause)/

PAIRING (pairing) button

Play music or pause playback. Press and hold to

switch to pairing mode. When this happens, the main

unit will make a sound to indicate that pairing mode

has been entered.



Volume –/+ buttons

Adjust the volume.



WHITE/COLOR (white/color)/

OFF (light off)

button

Switch the illumination of the main unit between

white light, color mode, and off. Press and hold to turn

off the light and disconnect BLUETOOTH.

Press while pressing the STEREO/DOUBLE (switch

mode)/SHIFT (shift) button to set the Sleep Timer.



Dimmer/color ring

Adjust the brightness. Spin to the right for brighter,

and to the left for darker. When in color mode, adjust

the color.



STEREO/DOUBLE (switch mode)/SHIFT (shift)

button

Switch the playback mode between stereo and double

when using the Speaker Add function.

Press and hold to shift the function of the other

buttons. Shift functions are listed on the back of the

remote.

Preparing the Remote

There is a battery inside the remote control at the

time of purchase. Before using the remote control for

the first time, make sure to remove the protective

sheet by following the steps below.

1

On the rear of the remote control,

insert a coin or other object into the

groove on the battery cover, and

twist it to the left, until the marking

is aligned with OPEN.

The left side of the battery

cover is slightly lifted.

2

Open the battery cover (



), and

remove the protective sheet (



).

3

Return the battery to its former

position, and align the marking on

the battery cover with OPEN.

The left side of the battery

cover is slightly lifted.

4

Twist the battery cover to the right,

until the marking is aligned with

LOCK.

To replace the battery in the remote

control

Replace with a new CR2032 lithium battery from Sony.

Insert with + side up.



First insert the edge,



then fit the battery in

snugly.

Pairing and Connecting with

a BLUETOOTH Device

The unit can be paired with up to seven BLUETOOTH

devices.

1

Turn on the light fixture to which the

main unit is installed.

The bulb speaker turns on.

2

Press and hold the



(play/

pause)/

PAIRING (pairing) button.

The main unit will make a sound to indicate that

pairing mode has been entered. Release the

button when the sound is made.

3

Perform the pairing procedure on

the BLUETOOTH device to detect this

unit.

When a list of detected devices appears on the

display of the BLUETOOTH device, select

“

LSPX-102E26

.”

If passkey input is required on the display of a

BLUETOOTH device, input “

0000

.”

4

Make the BLUETOOTH connection

from the BLUETOOTH device.

When pairing is complete, the main unit will

make a sound to indicate that a BLUETOOTH

connection has been established.

If a connection was not made, repeat the

process from step 2.

To connect with a device after it has been paired,

see “Using a Previously Paired Device.”

Using a Previously Paired

Device

1


main unit is installed.

The bulb speaker turns on.

2

If the remote control does not have

a BLUETOOTH connection with any

device, press the



(play/pause)/

PAIRING (pairing) button.

The remote control automatically connects with

the device that was last connected.

If a connection cannot be made

Perform steps 3 to 4 of “Pairing and connecting with a

BLUETOOTH device.”

Hint

If the unit is already connected to a BLUETOOTH device and

you form a connection from a different device that was

previously paired with the unit, the connection switches to the

latter device.

Listening to Music

Profile: A2DP, AVRCP

Operate after making the BLUETOOTH connection

with your BLUETOOTH device.

1

Start playback on the BLUETOOTH

device, and adjust the volume to a

moderate level from the connected

device.

2

Adjust the volume using the Volume

–/+ buttons on the remote control.

When the volume reaches the lowest level

(mute) or the highest level, the main unit emits

two short beeps.

The Volume +

button has a

tactile dot.

Hints

•

You can also use the



(play/pause)/

PAIRING (pairing)

button on the remote control to play or pause the music.

•

The BLUETOOTH codec setting of the main unit is set to SBC

(Low) at the time of purchase. Change the BLUETOOTH

codec setting to AUTO or SBC to enjoy high quality

playback. For more details about the BLUETOOTH codec

setting, see the Help Guide (online instruction manual)

mentioned in “Manuals Supplied.”

Listening to Music with Two

Bulb Speakers (Speaker Add

Function)

About Speaker Add function

By using the Speaker Add function, you can connect a

single BLUETOOTH device to two bulb speakers

simultaneously. Select from the following two

playback methods.

Stereo mode

One bulb speaker plays

the sound on the left

channel (left side), while

the other bulb speaker

plays the sound on the

right channel (right side)

for stereo playback

between the two bulb

speakers.

L

R

Stereo

sound

Double mode

Both bulb speakers play

the same sound.

Mono

sound

Mono

sound

When using the Speaker

Add function, one bulb

speaker acts as the

“master unit” (left

channel), while the

other acts as the

“satellite unit” (right

channel). Be sure to

connect the BLUETOOTH

device only to the

master unit. The master

unit will then connect to

the satellite unit.

Master (L)

Satellite (R)

BLUETOOTH

device

Setting up the master

unit

Notes

•

The bulb speaker that is set up as the master unit plays the

sound on the left channel (left side) when in stereo mode.

Therefore, decide which bulb speaker you want to set up as

the left side, and make that the master unit.

•

Only set up one bulb speaker as the master unit. If you set

up two or more units as the master unit, the Speaker Add

function will not work.

1


bulb speaker that you want to set as

the left side is installed.

The bulb speaker lights up.

L

R

Note

Make sure that the light fixture containing the bulb

speaker that you want to set as the right channel (right

side) remains turned off. If two bulb speakers turn on

when a light fixture is in use, remove the bulb speaker

that you want to set as the right side.

2

Aim the remote control toward the

bulb speaker on the left side, then

hold down the



(play/pause)/

PAIRING (pairing) button for

approximately one second after

pressing and holding the STEREO/

DOUBLE (switch mode)/SHIFT (shift)

button.

L

R

The master unit setting is complete.

LSPX-102E26

4-579-894-

13

(1)

LED Bulb Speaker

Startup Guide

©2016 Sony Corporation

Printed in Japan

Sony LSPX-102E26 Startup Guide

Sony LSPX-102E26 Manual

Sony LSPX-102E26 manual content summary: