Sony MFM-HT75W User Manual - Page 12
Setup 3:Connect the power cord, Setup 4:Replace the connector, cover, Setup 5:Turn on the display
View all Sony MFM-HT75W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Setup 3: Connect the power cord 1 Connect the supplied power cord securely to the display's AC IN connector. 2 Connect the other end securely to a power outlet. Setup 5:Turn on the display and other equipment 1 Press the 1 (power) switch on the front of the display. The 1 (power) indicator lights up in green. 2 to the power outlet 1 to AC IN power cord (supplied) Setup 4: Replace the connector cover While pressing the hooks, push the connector cover onto the display until it clicks. connector cover 12 CH lights in green 2 Turn on the computer or other video equipment. 3 Press the signal. button to select the desired input The input signal will change each time you press the button. On-screen message DVI-D: PC 1 HD15: PC 2 TV channels : VIDEO 1 or : VIDEO 2 Input signal configuration DVI-D input connector (digital RGB) for PC 1 HD15 input connector (analog RGB) for PC 2 TV Y/PB/PR Component Video input jacks for VIDEO 1 Composite/S video input jacks for VIDEO 2 Note When using the PIP function, if you switch the input using the button or input select buttons, the PIP function may be released. If it happens, the input source that you have selected fills the entire screen. To use the PIP function again, set the "PIP Setting" menu to "PIP On" using the menu system or select "PIP On" by pressing the button (pages 15, 30). Tips • You can also select the inputs using the input select buttons on the remote control. • When you select the TV input, the number of the selected channel is displayed in the upper right corner of the screen. • When using the PIP function, use "Sub" in the "PIP" menu in the "Option" menu to select the input source for sub picture (page 30). If the TV input is selected for sub picture, you can change the channel using the CH +/- buttons.