Sony MFM-HT75W User Manual - Page 36
Troubleshooting - problems
View all Sony MFM-HT75W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Turning off the display automatically (for TV/VIDEO 1/VIDEO 2 only) You can set the display to turn off automatically after a predetermined period of time (15, 30, 45, 60, or 90 minutes). Press the SLEEP button on the remote control repeatedly. Each time you press the SLEEP button, the period of time changes as follows: Off SLEEP 15 min 30 min 45 min 60 min 90 min To cancel the Sleep timer Press the SLEEP button repeatedly until "Off" appears. Tips • If you turn the display off, and then turn it on again, the Sleep timer is set to off. • While the Sleep timer is activated, the 1 (power) indicator lights up in red. Troubleshooting Before contacting technical support, refer to this section. On-screen messages If there is something wrong with the input signal, one of the following messages appears on the screen. To solve the problem, see "Trouble symptoms and remedies" on page 38. If "Out of Range" appears on the screen This indicates that the input signal is not supported by the display's specifications. Check the following items. For more information about on-screen messages, see "Trouble symptoms and remedies" on page 38. If "xxx.x kHz / xxx Hz" is displayed This indicates that either the horizontal or vertical frequency is not supported by the display's specifications. The figures indicate the horizontal and vertical frequencies of the current input signal. I NFORMA T I ON DV I - D : PC1 Ou t o f Ra n g e XXX . XKHz / XXXHz If "Resolution i1280 × 768" is displayed (MFM-HT75W) This indicates that the resolution is not supported by the display's specifications (1280 × 768 or less). I NFORMA T I ON DV I - D : PC1 Ou t o f Ra n g e Re s o l u t i on>1280X768 If "Resolution i 1280 × 1024" is displayed (MFM-HT95) This indicates that the resolution is not supported by the display's specifications (1280 × 1024 or less). I NFORMA T I ON DV I - D : PC1 Ou t o f Ra n g e Re s o l u t i on>1280X1024 If "No Input Signal" appears on the screen This indicates that no signal is being input via the currently selected connector. I NFORMA T I ON DV I - D : PC1 No I npu t S i gna l Go t o Powe r Sa v e 36