Sony NWZ-B133F Operation Guide - Page 6

Parts and Controls Front Rear Headphones  REC/STOP button ( pages 36, 39) Starts/stops recording. You can record the sound from the microphone or the currently received FM program (NWZ-B133F/B135F only).  VOL +*1/- button Adjusts the volume.  Power Illuminator Illuminated by LED ( page 44). The pattern of the illumination varies according to the operation.  BACK/HOME*2 button ( page 13) Returns to the previous menu. Press and hold this button to display the HOME menu.  BASS button ( page 28) Activates the Bass function to emphasize the low sound range.  *1 button ( pages 13, 19) Turns on/off the player ( page 16). Starts/pauses song playback, or pauses/restarts recording. When a menu appears on the display, use this button to confirm the menu item.  / button ( pages 13, 23) Selects a song, album, artist, folder or menu item. You can also skip to the beginning of the song/album/artist/folder, fast-forward or 10 fast-rewind.  Display ( page 22)  Microphone ( page 39)   (Headphone) jack When connecting the headphones, insert the plug until it clicks into place. If connected improperly, it may not sound right. *1 There are tactile dots. Use them to help with button operations. *2 Functions which are marked  near the buttons are activated if you press them. Likewise functions marked near the buttons, are activated if you press and hold them.  RESET button ( page 47) Resets the player when you press the RESET button with a small pin, etc. When you turn on the player after resetting it, the player reactivates the previously set items.  Strap hole This is used to attach a strap (sold separately).  HOLD switch You can protect the player against accidental operation by using the HOLD switch when carrying it. By sliding the HOLD switch in the direction of the arrow (), all the buttons are inoperable. If you press buttons while the HOLD function is activated, "HOLD" and the current time appears in the display. (The current time appears only when the clock is set ( page 44).) If you slide the HOLD switch to the opposite position, the HOLD function is released.  USB cap Remove the USB cap and connect the USB connector of the player to a USB connector on your computer. To remove the USB cap Remove the USB cap as shown below. USB connector 11