Sony PS-LX300USB Operating Instructions - Page 7
Hooking Up the Turntable, Getting Started - stereo turntable system
UPC - 027242731271
View all Sony PS-LX300USB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Hooking Up the Turntable The phono cable comes attached to the rear of the cabinet. 1 Set the PHONO/LINE switch (on the rear of the turntable) according to the jacks of your stereo system (amplifier). 3 Connect the AC power cord. Connect the AC power cord to an AC wall outlet after completing all of the connections by performing steps 1 and 2. to a wall outlet • When your stereo system (amplifier) has PHONO input jacks (connect to PHONO input jacks) set to PHONO. The Equalizer function is off. • When your stereo system (amplifier) does not have PHONO input jacks (connect to AUX, VIDEO input jacks, etc.) set to LINE. The Equalizer function is on. 2 Connect the cable with the white plug to the white (L) jack and connect the cable with the red plug to the red (R) jack. Make sure to insert the plugs firmly into the jacks. If the plugs are not inserted firmly, noise may occur. GB