Sony PVM-X550 Operating Instructions
Sony PVM-X550 Manual
 |
View all Sony PVM-X550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony PVM-X550 manual content summary:
- Sony PVM-X550 | Operating Instructions - Page 1
4-593-980-15(1) Professional Video Monitor Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. PVM-X550 Software Version 2.0 © 2016 Sony Corporation - Sony PVM-X550 | Operating Instructions - Page 2
Sony dealer regarding this product. Model No. Serial No. Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions of important operating and maintenance (servicing) instructions in the literature accompanying the appliance - Sony PVM-X550 | Operating Instructions - Page 3
both. To reduce the risk of fire or electric shock, refer servicing to qualified service personnel. WARNING: THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES. 1. Use if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation - Sony PVM-X550 | Operating Instructions - Page 4
sony.co.kr/handler/BPAS-Start for important information and complete terms and conditions of Sony's limited warranty applicable to this product. Consignes de sécurité importantes Lisez ces instructions. Conservez ces instructions appareil uniquement avec le chariot, le support, le trépied ou la - Sony PVM-X550 | Operating Instructions - Page 5
l'utilisateur de la présence d'instructions d'utilisation et de maintenance (entretien femelle/fiche mâle ci-dessus, consultez un technicien du service après-vente qualifié. Pour les clients au Canada CAN ICES Pour les clients au Canada GARANTIE LIMITÉE DE SONY - Rendez-vous sur http://www.sonybiz.ca - Sony PVM-X550 | Operating Instructions - Page 6
Netzstecker muss mit einer in der Nähe des Geräts befindlichen, leicht zugänglichen Wandsteckdose verbunden werden. Wenn während des Betriebs eine Funktionsstörung auftritt, ist der Unterbrecher zu betätigen bzw. der Netzstecker abzuziehen, damit die Stromversorgung zum Gerät unterbrochen wird. - Sony PVM-X550 | Operating Instructions - Page 7
40 10 см. 1 3 2 3 1-7-1 108-0075 123103 6 2013-01) 2013 01 42 53 7 - Sony PVM-X550 | Operating Instructions - Page 8
Caution This unit is heavy. Make sure to unpack and move the unit with two or more people. Firmly grip the bottom of this unit as shown below. 03/ 12/2008 № 1057). Türkiye'deki müşteriler için AEEE Yönetmeliğine Uygundur 8 - Sony PVM-X550 | Operating Instructions - Page 9
24 [Color Temp.] menu 25 [User Configuration] menu 26 [Serial Remote] menu 40 [Security] menu 40 Connecting the SDI Signals 41 Troubleshooting 42 Specifications 42 Available Signal Formats 43 Dimensions 53 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are - Sony PVM-X550 | Operating Instructions - Page 10
as specified in the "Specifications" section. A nameplate in consideration of the ventilation and service operation. Do not block burn-in or reduction in brightness may occur. These problems are not a malfunction. Images that may cause , refer to the operation manual of the connected equipment. - Sony PVM-X550 | Operating Instructions - Page 11
.2100(HLG)], or [S-Log3(Live HDR)] is selected for [EOTF] in the [Input Setting] menu, images are displayed in HDR (High Dynamic Range). In this manual, this status is described as "HDR display." For details on the HDR (High Dynamic Range) display, see page 29. On the Surface of the Unit - Sony PVM-X550 | Operating Instructions - Page 12
has a built in fan for cooling. When the fan stops and the (Power) indicator blinks in red, turn off the power and contact an authorized Sony dealer. 12 Precaution - Sony PVM-X550 | Operating Instructions - Page 13
. Execute Panel Calibration again. Note If the yellow light persists after performing Panel Calibration more than a few times, contact an authorized Sony dealer. STATUS indicator Slowly flashes in yellow when the screen saver starts up, and quickly flashes in yellow when a warning during - Sony PVM-X550 | Operating Instructions - Page 14
OVER RANGE indicator of the front panel may show error or warning signals. If an error display appears, refer to Sony qualified service personnel. Error display OVER RANGE indicator - - Power indicator Symptom Flashes in red (every second) Power abnormality, circuit board abnormality, sensor - Sony PVM-X550 | Operating Instructions - Page 15
for the operating mode when the monitor is in the sleep mode. Rotary encoder/MANUAL buttons Knob CONTRAST knob BRIGHT knob CHROMA knob PHASE knob Operations Adjusts the picture contrast -17R units can be simultaneously connected to a PVM-X550 unit. 15 Location and Function of Parts and Controls - Sony PVM-X550 | Operating Instructions - Page 16
Input Signals and Adjustable/Setting Items Item APERTURE CHROMA 1) BRIGHT CONTRAST User Preset Color Temp. Manual Adjustment (Color Temp.) Flicker Free 2) High Brightness Mode Screen Saver 2) RGB Range YCC Range Color Space EOTF Transfer Matrix Internal Signal Internal Signal Pattern - Sony PVM-X550 | Operating Instructions - Page 17
Quad View Functions and Adjustable/Setting Items Item APERTURE CHROMA 1) BRIGHT CONTRAST User Preset Color Temp. Manual Adjustment (Color Temp.) Flicker Free High Brightness Mode Screen Saver RGB Range YCC Range Color Space EOTF Transfer Matrix Internal Signal Internal Signal - Sony PVM-X550 | Operating Instructions - Page 18
Connect to the Sony Monitor Control Unit BKM-16R or BKM-17R by using a 10BASE-T/100BASE-TX LAN cable (shielded type, optional). CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions for this port - Sony PVM-X550 | Operating Instructions - Page 19
video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports HDCP (High-bandwidth Digital Content Protection), a copy protection technology that incorporates coding technology for digital video signals. 1) The terms - Sony PVM-X550 | Operating Instructions - Page 20
Connecting the AC Power Cord 1 Plug the AC power cord into the AC IN socket on the rear panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket Connecting the HDMI cable 1 Remove the two screws on the both sides of the HDMI IN connector. AC power cord AC plug holder ( - Sony PVM-X550 | Operating Instructions - Page 21
Using the Menu The unit is equipped with an on-screen menu for making various adjustments and settings such as picture control, input setting, set setting change, etc. The current settings are displayed in place of the marks on the illustrations of the menu screen. BACK button 1 Press the MENU - Sony PVM-X550 | Operating Instructions - Page 22
Switching the Input Signal You can switch input signals (SDI1 4K, SDI1 2K, SDI2 4K, SDI2 2K, or HDMI) that are compatible to each input connector of this unit by using the ASSIGN 1/2 buttons on the side panel of this unit or the numeric buttons of the optional BKM-16R or BKM-17R. The following - Sony PVM-X550 | Operating Instructions - Page 23
Preset] [Color Temp.] [Contrast] [Brightness] [Chroma] [Aperture] [Marker Preset] [Copy From] [Color Temp.] [Color Temp.] [R/G/B Gain] [R/G/B Bias] [Manual Adjustment] [Adjust Gain/Bias] [Signal] [Copy From] [User Configuration] [System Setting] [LED Brightness] [Format Display] [Flicker Free] [High - Sony PVM-X550 | Operating Instructions - Page 24
[RGB/YCC Range] [Input Setting] [Native Scan] [Flicker Free] Page 2 [RGB/YCC Range] [Color Depth] [Colorimetry] Page 4 [User Preset] [Color Temp.] [Contrast] [Brightness] [Chroma] [Aperture] [Color Space] [EOTF] [Transfer Matrix] Page 3 (for the SDI signal input) - Sony PVM-X550 | Operating Instructions - Page 25
color temperature. You need to use the measurement instrument to adjust the white balance. Recommended: Konica Minolta Color Analyzer CA210/310 Submenu Setting [Manual Adjustment] If you set the [Color Temp.] to the [User1] to [User5] setting, you can adjust the color temperature. The set values - Sony PVM-X550 | Operating Instructions - Page 26
Submenu [Copy From] Setting Select from the following items to copy the white balance data of the selected color temperature. [D65] [D93] [D61] [D55] [DCI] [User1] [User2] [User3] [User4] [User5] [DCI XYZ] Notes If [Password Lock] has been turned [On], the [User1] value is - Sony PVM-X550 | Operating Instructions - Page 27
Panel Calibration again. If the message is displayed after performing Panel Calibration a few times, it may be due to a failure. Contact an authorized Sony dealer. It is recommended to perform Panel Calibration once a week since it is effective to improve the uniformity of the screen. When the - Sony PVM-X550 | Operating Instructions - Page 28
1023 (10bit) / 0 to 4095 (12bit) [Limited]: 64 to 940 (10bit) / 256 to 3760 (12bit) [SDI Full Range] 1): 4 to 1019 (10bit) / 16 to 4076 (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range - Sony PVM-X550 | Operating Instructions - Page 29
[CRT] [2.4(HDR)] [S-Log3(HDR)] [S-Log2(HDR)] [SMPTE ST 2084(HDR)] [RGB(SG1.2)] 1) [ITU-R BT.2100(HLG)] [S-Log3(Live HDR)] 1) For the specifications of [RGB(SG1.2)], see "About [RGB(SG1.2)]" (page 29). When [ITU-R BT.2100(HLG)] is selected [HLG System Gamma]: Sets the system gamma of - Sony PVM-X550 | Operating Instructions - Page 30
1023 (10bit) / 0 to 4095 (12bit) [Limited]: 64 to 940 (10bit) / 256 to 3760 (12bit) [SDI Full Range] 1): 4 to 1019 (10bit) / 16 to 4076 (12bit) 1) This manual regards the Full Range signals that are scaled to the quantized value except the inhibit code on the SDI standard as the SDI Full Range - Sony PVM-X550 | Operating Instructions - Page 31
[CRT] [2.4(HDR)] [S-Log3(HDR)] [S-Log2(HDR)] [SMPTE ST 2084(HDR)] [RGB(SG1.2)] 1) [ITU-R BT.2100(HLG)] [S-Log3(Live HDR)] 1) For the specifications of [RGB(SG1.2)], see "About [RGB(SG1.2)]" (page 29). When [ITU-R BT.2100(HLG)] is selected [HLG System Gamma]: Sets the system gamma of - Sony PVM-X550 | Operating Instructions - Page 32
HDR)] [S-Log3(Live HDR)] is the setting for which this unit is used as the reference monitor in the S-Log3 Live HDR workflow 1) which Sony advocates. Displays the S-Log3 input signal adding the system gamma. This system gamma is set so that the compatibility with the monitoring of the conventional - Sony PVM-X550 | Operating Instructions - Page 33
[CRT] [2.4(HDR)] [S-Log3(HDR)] [S-Log2(HDR)] [SMPTE ST 2084(HDR)] [RGB(SG1.2)] 1) [ITU-R BT.2100(HLG)] [S-Log3(Live HDR)] 1) For the specifications of [RGB(SG1.2)], see "About [RGB(SG1.2)]" (page 29). When [ITU-R BT.2100(HLG)] is selected [HLG System Gamma]: Sets the system gamma of - Sony PVM-X550 | Operating Instructions - Page 34
Submenu [HDMI Format] [HDMI Signal Format] Setting Change the setting to receive images in a high-resolution HDMI signal 1) or a HDR-compatible HDMI signal. 1) Signals in resolutions of 3840 × 2160 or 4096 × 2160 are listed below: 4:4:4 RGB/YCbCr-50P/60P-8bit signals 4:2:2 YCbCr-50P/60P-12bit - Sony PVM-X550 | Operating Instructions - Page 35
[Marker] Press the button to display the aspect marker, area marker 1, area marker 2 or center marker with the selected marker preset setting. [Aspect Marker] Press the button to display the aspect marker. [Area Marker1] Press the button to display area marker 1. [Area Marker2] Press the button to - Sony PVM-X550 | Operating Instructions - Page 36
[Gamut Marker Setting] [Marker Preset] Displays the selected marker preset data. [Aspect Marker Setting] Submenu [Gamut Marker] [Target] [Type] Setting Turns the gamut marker [On]/[Off]. The zebra pattern can be displayed for the signal outside of the targeted color space while [ITU-R BT.2020] is - Sony PVM-X550 | Operating Instructions - Page 37
Submenu Setting [Area Marker1] Sets whether or not to display area marker 1 ([Off] or [On]). [Area Marker1 Mode] Sets the display mode of the area marker. You can select [Safe Area Marker] or [Flexible Area Marker]. [Aspect Mode] Sets the aspect ratio of area marker 1 when [Safe Area Marker] - Sony PVM-X550 | Operating Instructions - Page 38
Submenu Setting Note When [Safe Area Marker] is selected in [Area Marker1 Mode], the size of the area differs depending on the [Aspect Mode] setting. With 16:9 Submenu [Type] Setting Sets the display mode of the center marker. You can select from [Type1], [Type2], or [Type3]. [Type1] 80% [ - Sony PVM-X550 | Operating Instructions - Page 39
Screen A. The combination of SDI 1 and SDI2 cannot be displayed with Quad View. [Native Scan] is set to [Off]. The XYZ format signal is not supported. 39 Adjustment Using the Menus - Sony PVM-X550 | Operating Instructions - Page 40
Preset for [User Preset1]. Select [Off] to not protect with the password. [Change Password]: Changes the password. Note If you forget the password, refer to Sony qualified service personnel. 40 Adjustment Using the Menus - Sony PVM-X550 | Operating Instructions - Page 41
Connecting the SDI Signals Single Link 3G/HD-SDI, Dual Link 3G/HD-SDI, and Quad Link 3G/HD-SDI signals can be input to the SDI 1 IN and SDI 2 IN connectors of this unit. Signals up to 4-channel Single Link 3G/HD-SDI signals, signals up to 2-channel Dual Link 3G/HD-SDI signals, or 1-channel Quad - Sony PVM-X550 | Operating Instructions - Page 42
Troubleshooting Specifications This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support blocked with something such as dust. In this case, refer to Sony qualified service personnel. Color is not displayed correctly Check the [ - Sony PVM-X550 | Operating Instructions - Page 43
DUE TO CIRCUMSTANCES OF ANY KIND. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND. Depending on the operating - Sony PVM-X550 | Operating Instructions - Page 44
4 (YCbCr) 12bit 4 : 4 : 4 (RGB) 10bit 4 : 4 : 4 (YCbCr) 10bit 4 : 4 : 4 (RGB) 12bit 4 : 4 : 4 (YCbCr) 12bit 4 : 4 : 4 (RGB) 10bit 4 : 4 : 4 (YCbCr) 10bit 4 : 4 : 4 (RGB) 12bit 4 : 4 : 4 (YCbCr) 12bit 44 Specifications SDI 1 SDI 2 SDI 1 SDI 2 - Sony PVM-X550 | Operating Instructions - Page 45
4 : 4 : 4 (XYZ) 12bit 4 : 4 : 4 (XYZ) 12bit Signal Structure 4 : 2 : 2 (YCbCr) 10bit 4 : 2 : 2 (YCbCr) 10bit Level A/Level B-DL Level A/Level B-DL SDI 1 SDI 2 SDI 1 SDI 2 45 Specifications - Sony PVM-X550 | Operating Instructions - Page 46
1280 × 720/30P 1) 1280 × 720/25P 1280 × 720/24P 1) 2048 × 1080/60P 1) 2048 × 1080/50P 2048 × 1080/48P 1) 46 Specifications Signal Structure 4 : 4 : 4 (RGB) 10bit 4 : 4 : 4 (YCbCr) 10bit 4 : 4 : 4 (RGB) 12bit 4 : 4 : 4 (YCbCr) 12bit 4 : 4 : 4 (RGB) 10bit 4 : 4 : 4 (YCbCr) 10bit 4 : 4 : 4 (RGB) 12bit - Sony PVM-X550 | Operating Instructions - Page 47
A/Level B-DL Level A/Level B-DL Level A/Level B-DL Level A/Level B-DL Level A/Level B-DL Level A/Level B-DL Level A/Level B-DL SDI 1 SDI 2 SDI 1 SDI 2 47 Specifications - Sony PVM-X550 | Operating Instructions - Page 48
Square/2SI Square Square/2SI Square Level A/Level B-DL Square/2SI Level A/Level B-DL Square/2SI SDI 1 SDI 2 SDI 1 SDI 2 SDI 1 SDI 2 SDI 1 SDI 2 48 Specifications - Sony PVM-X550 | Operating Instructions - Page 49
Square/2SI Square/2SI Level A/Level B-DL Square/2SI Level A/Level B-DL Square Level A/Level B-DL Square/2SI Level A/Level B-DL Square SDI 1 SDI 2 49 Specifications - Sony PVM-X550 | Operating Instructions - Page 50
) 12bit 4 : 4 : 4 (RGB) 12/10/8bit 4 : 4 : 4 (YCbCr) 12/10/8bit 4 : 2 : 2 (YCbCr) 12bit 4 : 4 : 4 (RGB) 12/10/8bit 4 : 4 : 4 (YCbCr) 12/10/8bit 4 : 2 : 2 (YCbCr) 12bit SDI 1 SDI 2 HDMI 50 Specifications - Sony PVM-X550 | Operating Instructions - Page 51
/8bit 3) 4) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 4 : 2 : 2 (YCbCr) 4 : 4 : 4 (RGB) 4 : 4 : 4 (YCbCr) 12bit 12/10/8bit 3) 5) 12/10/8bit 3) 4) 4 : 2 : 2 (YCbCr) 12bit HDMI 51 Specifications - Sony PVM-X550 | Operating Instructions - Page 52
Also compatible with the frame rate 1/1.001. 2) This signal is described as "equivalent to the 4K signal" in this manual. 3) [Enhanced Format] must be selected in the [HDMI Signal Format] menu (page 34). Also, when using this signal is displayed as a 4:4:4(RGB)8bit signal. HDMI 52 Specifications - Sony PVM-X550 | Operating Instructions - Page 53
Mass: Approx. 22.9 kg (50 lb 7.8 oz) Unit: mm (inches) * Length of M6 screws (rear) Monitor cabinet Attached object 6 (1/4) to 9 (3/8) Screw * The specification of the screw is for the VESA mount. Make sure to tighten the screws using the screwdriver which conforms to the supplied screws - Sony PVM-X550 | Operating Instructions - Page 54
Sony Corporation
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
 |
 |
4-593-980-
15
(1)
Professional
Video Monitor
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
PVM-X550
Software Version 2.0
© 2016 Sony Corporation