Sony RHT-G2000 Operating Insructions

Sony RHT-G2000 - Home Theater Built-in Sound Rack System Manual

Sony RHT-G2000 manual content summary:

  • Sony RHT-G2000 | Operating Insructions - Page 1
    651-468-11(2) Theatre Stand System Operating Instructions This system has the following instructions: • Quick Setup Guide Describe the basic connections, settings and operations. • Operating Instructions (this book) Describe more details on settings and operations. RHT-G2000 © 2005 Sony Corporation
  • Sony RHT-G2000 | Operating Insructions - Page 2
    Systems, Inc. Thank you for purchasing this product. This stand is designed for use with KDF-E42A10/KDF-E50A10/KDS-R50XBR1/ KDS-R60XBR1, and can accommodate a VCR, DVD player, etc. Please read the following instructions thoroughly and follow them carefully when installing the TV. Retain this manual
  • Sony RHT-G2000 | Operating Insructions - Page 3
    similar surface. - Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. Accessories Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child
  • Sony RHT-G2000 | Operating Insructions - Page 4
    (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250 Part H) NEC -NATIONAL ELECTRICAL CODE SERVICE Damage Requiring Service Unplug the appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions: - When the
  • Sony RHT-G2000 | Operating Insructions - Page 5
    appliance, ask the service technician to perform routine safety checks (as specified by Sony) to determine that the appliance is in safe operating condition. WARNING Do not lean on or hang from the TV when the TV is placed on the stand. The TV may fall from the stand causing an accident resulting
  • Sony RHT-G2000 | Operating Insructions - Page 6
    make alterations to the stand. Secure the TV to the stand. If you fail to do so, the TV may fall or the stand may topple over. This may cause injury. Following the instructions in this manual, place the TV legs into the stopper and use the support belt to prevent the TV from toppling over. Notes
  • Sony RHT-G2000 | Operating Insructions - Page 7
    power cord must be changed only at the qualified service shop. On heat buildup Although the receiver heats up off and unplug the receiver. • The sound fields memorized for each input and the preset cord. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a
  • Sony RHT-G2000 | Operating Insructions - Page 8
    the connected components Programming the remote for TV operation (Sony TV only 9 (Input SYNC) Programming the remote 10 Controlling the connected components 12 Settings and Adjustments Using the AMP menu 14 Setting up the speakers 14 Enjoying the sound at low volume 15 (AUDIO DRC) Enjoying
  • Sony RHT-G2000 | Operating Insructions - Page 9
    Controlling the connected components Programming the remote for TV operation (Sony TV only) (Input SYNC) If you connect your TV by jacks other than VIDEO IN 1 or HD/DVD IN 5 (see the supplied "Quick Setup Guide"), follow the steps below to program the remote. The TV input will be selected
  • Sony RHT-G2000 | Operating Insructions - Page 10
    remote to control non-Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control
  • Sony RHT-G2000 | Operating Insructions - Page 11
    104, 123 105, 106, 107 108, 109, 110 116 112, 113, 114 117 120, 121, 122 To control a DAT deck Maker SONY PIONEER Code(s) 203 219 To control an MD deck Maker SONY Code(s) 301 To control a tape deck Maker SONY DENON NAKAMICHI PIONEER YAMAHA Code(s) 201, 202 204, 205 210 213, 214 217, 218 To
  • Sony RHT-G2000 | Operating Insructions - Page 12
    To control a blu-ray disc recorder Maker SONY Code(s) 310, 311, 312 Controlling the connected components You can control connected components with the remote of this system. 1 qk qj qh qg - CLEAR ENTER m M .> H X x qf qd qs O * qa 2 3 4 5 6* 7 8 9 0 * The H, TV VOL+, and TV CH
  • Sony RHT-G2000 | Operating Insructions - Page 13
    -disc changer only). To control the TV Remote Button 1 TV \/1 2 AUDIO 8 DISPLAY qa TV/VIDEO qa TV CH +/- qa TV VOL +/- qa WIDE qj Numeric buttons qk CH +/- Function Turns the TV on or off. Changes the sound to Multiplex, Bilingual or Multi channel TV Sound. Selects information displayed on the
  • Sony RHT-G2000 | Operating Insructions - Page 14
    following items with AMP MENU on the remote. The default settings are underlined. AMP MENU LEVEL CEN LEVEL (center speaker level) -6 dB - +6 dB or c. 5 While monitoring the sound, press x/X repeatedly to select the setting you want. • CEN LEVEL (center speaker level) • SW LEVEL (subwoofer level
  • Sony RHT-G2000 | Operating Insructions - Page 15
    (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives an AC-3 multiplex broadcast signal. Note • To receive AC-3 signal, you need to connect a digital satellite tuner to the system with an optical cable or coaxial cable, and set the digital output mode of the digital satellite
  • Sony RHT-G2000 | Operating Insructions - Page 16
    SYNC" appears, then press ENTER or c. 4 Press X/x to select the setting. • SYNC OFF: does not adjust. • SYNC ON: adjusts the difference between picture and sound. 5 Press ENTER or AMP MENU. The AMP menu turns off. Note • Depending on the input stream, this function may not be effective. 1 Press AMP
  • Sony RHT-G2000 | Operating Insructions - Page 17
    advantage of this front surround sound simply by selecting one of system's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters into your home. SOUND FIELD +/- - CLEAR ENTER m M .> H X x O About S-Force PRO Front Surround Sony's long-term involvement in
  • Sony RHT-G2000 | Operating Insructions - Page 18
    Outputting sound sources from TV x NEWS This mode clearly reproduces human voice in TV programs, such as news programs or dramas. Tip • The system memorizes the last sound field selected for each input. In TUNER function mode, the same sound field is memorized for both FM and AM. 18US
  • Sony RHT-G2000 | Operating Insructions - Page 19
    select the preset station you want. Each time you press the button, the system tunes in one preset station. 3 Adjust the volume by pressing VOLUME +/-. Press "/1. To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or - repeatedly. For
  • Sony RHT-G2000 | Operating Insructions - Page 20
    erased. To reset the interval, repeat the same procedure. Using the Sleep Timer You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset " appears. Note • This function is only for this system, not for the connected TV or other components. 20US
  • Sony RHT-G2000 | Operating Insructions - Page 21
    speakers You can connect your optional speakers to this system as surround speakers. The optional speakers should be placed up to 5.0 m (16 ft) from the listening position. Place the optional speakers as illustrated below. TV Theatre Stand Connecting the speakers Connecting the speakers SPEAKERS
  • Sony RHT-G2000 | Operating Insructions - Page 22
    To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening (1 ft) increments from 1.0 to 7.0 meters (4 to 23 ft). x SURR DIST (surround speaker distance) Default setting: 3.0 meters (10 ft) You can set in 0.2 meter (1 ft)
  • Sony RHT-G2000 | Operating Insructions - Page 23
    selecting one of system's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters into your home. SOUND FIELD +/- - CLEAR ENTER m M .> H X x O Press SOUND FIELD +/-. The present sound field appears. Press SOUND FIELD +/- repeatedly until the sound field you
  • Sony RHT-G2000 | Operating Insructions - Page 24
    outputs 2 channel sources from the front, center, and surround speakers simultaneously. The sound that is output from the surround speakers is same as the sound that is output from the front speakers. Tip • The system memorizes the last sound field selected for each input. In TUNER function mode
  • Sony RHT-G2000 | Operating Insructions - Page 25
    If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. General The power is not turned on. • Check that the AC power cord
  • Sony RHT-G2000 | Operating Insructions - Page 26
    Sound is interrupted or there is noise. • Check that you are not inputting PCM 96 kHz audio signals; this system cannot output PCM 96 kHz audio signals. There is no picture or an unclear picture appears on the TV screen. • You have set progressive format on your DVD player but your TV cannot accept
  • Sony RHT-G2000 | Operating Insructions - Page 27
    Specifications A B C B C Dimensions: mm (inch) Weight: kg (oz) A 1,570 (61 7/8) B sound output. Inputs (Analog) TV, SAT, DVD, VIDEO 1, VIDEO 2 Sensitivity: 610 mV Impedance: 25 kilohms Inputs (Digital) TV, SAT, DVD, VIDEO 1, VIDEO 2 (Coaxial) Impedance: 75 ohms Tuner section System
  • Sony RHT-G2000 | Operating Insructions - Page 28
    (174 lb 3 oz) Supplied accessories AM loop antenna (1) FM wire antenna (1) Input Box (4) System cable (4) Optical cable (1) Video cord (blue/green/red) (1) Video cord (yellow) (1) Remote commander (remote) (1) Size AA (R6) batteries (2) Operating Instructions (1) Quick Setup Guide (card
  • Sony RHT-G2000 | Operating Insructions - Page 29
    Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel 1 2 ?/1 6 A Front panel display (30) B Sound field indicator (17) C VOLUME +/- (26) 54 3 D INPUT SELECTOR (20, 26) E (remote sensor) (26) F "/1 (on/standby) (20, 26) continued 29US
  • Sony RHT-G2000 | Operating Insructions - Page 30
    Front panel display About the indications in the front panel display SLEEP A/V SYNC A Current surround format B Lights up in SLEEP mode. (20) C Lights up when A/V SYNC is functioning. (16) TUNED ST MONO D Lights up when a radio station is tuned. (19) E Lights up when a stereo broadcast is tuned. (
  • Sony RHT-G2000 | Operating Insructions - Page 31
    Rear panel 5 ANTENNA AM COAXIAL FM 75 SPEAKERS + - L L R + SURROUND R - MODE 5.1CH FRONT 1 2 3 A COAXIAL FM 75Ω jack B SPEAKERS jacks (21) C 5.1CH/FRONT mode switch (21) D AUDIO VIDEO INPUT jacks E AM terminal SAT DVD VIDEO 1 VIDEO 2 AUDIO VIDEO INPUT 4 continued 31US
  • Sony RHT-G2000 | Operating Insructions - Page 32
    Remote control Here describes the buttons for amplifier operation only. See page 12 for the buttons for operation of the connected components. qa 0 TV ?/1 AV ?/1 ?/1 RM SETUP P SYSTEM STANDBY VIDEO1 VIDEO2 TV DVD SOUND FIELD TUNER/BAND SAT CH/DISC SKIP AMP SLEEP MENU 1 2 3 FM MODE
  • Sony RHT-G2000 | Operating Insructions - Page 33
  • Sony RHT-G2000 | Operating Insructions - Page 34
  • Sony RHT-G2000 | Operating Insructions - Page 35
  • Sony RHT-G2000 | Operating Insructions - Page 36
    Sony Corporation Printed in Malaysia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Theatre Stand
System
Operating Instructions
2-651-468-
11
(2)
© 2005 Sony Corporation
RHT-G2000
This system has the following instructions:
Quick Setup Guide
Describe the basic connections, settings and operations.
Operating Instructions (this book)
Describe more details on settings and operations.
© 2005 Sony Corporation