Sony SA-VA10 Operating Instructions

Sony SA-VA10 Manual

Sony SA-VA10 manual content summary:

  • Sony SA-VA10 | Operating Instructions - Page 1
    SONY 3-856-457-12(1) Home Theater Active Speaker System Operating Instructions SA-VA10 © 1996 by Sony Corporation
  • Sony SA-VA10 | Operating Instructions - Page 2
    (servicing) instructions in the literature accompanying the appliance. Owner's Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SA-VA10
  • Sony SA-VA10 | Operating Instructions - Page 3
    pads 7 Choosing the Best Location 7 Speaker System Hookups 8 Audio Component Hookups 9 Home Theater Operations Enjoying Surround Sound 10 Adjusting the Surround Sound 11 Adjusting the Sound 12 Using an External Center Speaker 13 Additional Information Troubleshooting 14 Specifications 14 Glossary 15
  • Sony SA-VA10 | Operating Instructions - Page 4
    alfhildrAiitb The SA-VA10 is an active home-theater speaker system incorporating a Dolby Pro Logic decoder and super woofer speakers. Its design don't have to connect a center speaker to optimize the surround effects. Easy operation via the supplied remote ensures maximum enjoyment of the home-
  • Sony SA-VA10 | Operating Instructions - Page 5
    the dynamic bass sounds found in movie theaters (mode 1) and concert halls (mode 2) to your living room. Power turns on and off automatically The speakers will turn on automatically when a sound signal is input and turn off when you've finished watching a program and the sound signal goes out. So
  • Sony SA-VA10 | Operating Instructions - Page 6
    at the qualified service shop. On placement • Do not place the speakers near heat speaker system: • Front L/R speaker connecting cord, 3.5 m (1) • Rear speaker SS-SR151 (2) • Rear speaker connecting cord, 10 m (2) • Audio connecting cord, 1.5 m (1) • Remote commander, (remote) RM-J10 (1) • Sony
  • Sony SA-VA10 | Operating Instructions - Page 7
    shown below to operate Sony TVs. To turn on a Sony TV operate a Sony TV turn off a Sony TV Press TV POWER the button(s) for the operation you desire. TV POWER Choosing the Best Location To obtain high sound quality and a proper sound image from the front speakers, place the speaker with the built
  • Sony SA-VA10 | Operating Instructions - Page 8
    your TV or VCR to the speakers. Rear speaker SS-SR151 Rear speaker SS-SR151 STEP 4 TV Right front speaker VCR Left front speaker The arrow '-- indicates signal flow. STEP 1 Connecting the front speakers right speaker R ch SPEAKER INPLT left speaker I R r SPFAKFF O,PUT To connect, depress
  • Sony SA-VA10 | Operating Instructions - Page 9
    . Hooking up the Sony HCD-VA550 (Optional Compact Disc Deck Receiver) 1 Connect the LINE OUT FIXED jacks on the HCD-VA550 to the 2 IN jacks on the left front speaker. Be sure to connect it to the 2 IN jacks. HCD-VA550 LINE OU FIUED front left speaker IN 2 VCR/cable box R AUDIO L VIDEO OUTPUT
  • Sony SA-VA10 | Operating Instructions - Page 10
    on. Once you've turned the speakers on, they turn themselves off and on automatically with the auto power on/off function. 2 Press INPUT 1 or 2 on the remote or INPUT on the operation panel to select the program source. For example, if you connected your VCR to the 1 IN jacks, select INPUT
  • Sony SA-VA10 | Operating Instructions - Page 11
    you turn on the TV or start playback from the VCR and the POWER indicator turns green. t If you press POWER on the remote when the speakers are on The speakers enter standby mode (the red standby indicator lights up) and the auto power on/off function will not operate. You have to
  • Sony SA-VA10 | Operating Instructions - Page 12
    like presence regardless of the size of your room. If the rear speakers are close to your listening position, choose a longer delay time. mode. 1 Choose any surround mode. 2 Playback a program. 3 Press DELAY on the remote once to display the current delay time. 4 Press DELAY a few times to choose
  • Sony SA-VA10 | Operating Instructions - Page 13
    the NORMAL or WIDE mode. For details on Dolby Pro Logic Surround sound, see page 15. 0 SURROUND CENTER MODE Press SURROUND on the front left speaker to choose PRO LOGIC. ("PRO LOGIC" appears in the display instead of "DOLBY SUR" when you connect an external center
  • Sony SA-VA10 | Operating Instructions - Page 14
    speakers, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There's no sound from any of the speakers Rear: Accepts only supplied rear speakers SS-SR151 R-ch: Accepts only SA-VA10 R-ch speaker Tone control Front/Center Bass:
  • Sony SA-VA10 | Operating Instructions - Page 15
    AC power cord 9 audio components 9 speakers 8 TV/VCRs 9 N, 0 NORMAL mode 13, 15 P, Q PHANTOM mode 13, 15 R Remote 6, 10, 11, 12 Speakers connection 8 placement 7 Speaker volume 11 Surround sound 10, 11, 12 T Test tone 11 3 CI I LOGIC mode 13, 15 Troubleshooting 14 TV/VCR hookups 9 U, V Unpacking
  • Sony SA-VA10 | Operating Instructions - Page 16
    Sony Corporation Printed in Malaysia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

SONY
3-856-457-12(1)
Home
Theater
Active
Speaker
System
Operating
Instructions
SA-VA1
0
©
1996
by
Sony
Corporation