Sony SA-VE445H Instructions

Ee

eE Ee

E

e

LINE IN

WOOFER OUT

FRONT

CENTER

SURROUND

R

R

L

L

Ee

Ee

Ee

Ee

A

Front (Right)

Center

Subwoofer

Front (Left)

Surround (Right)

Surround (Left)

Amplifier

3.5 m

(11.5 ft.)

10 m

(32.8 ft.)

10 m

(32.8 ft.)

3.5 m

(11.5 ft.)

3.5 m

(11.5 ft.)

2003 Sony Corporation

Printed in China

English

Hooking up the system

Connect the speaker system to the speaker output

terminals of an amplifier.

Make sure power to all components (included the

subwoofer) is turned off before starting the hook-up.

Hookup

A

Usually, connect by this method.

This configuration is used when the amplifier is

connected to a DVD player, LD player, VCR or other

video devices.

Hookup

B

(U.S.A and Canadian models only)

Try this configuration instead of “Hookup

A

” when

there are no jacks on the amplifier for a subwoofer.

An optional specified speaker cord (2.5 m

×

2) (8.2 ft.

×

2)

is necessary when connecting this way.

Notes (

C

)

• Make sure the plus (+) and the minus (–) terminals on

the speakers are matched to the corresponding plus (+)

and minus (–) terminals on the amplifier.

• Be sure to tighten the screws of the speaker terminals

securely as loose screws may become a source of noise.

• Make sure all connections are firm.

Contact between

bare speaker wires at the speaker terminals may cause

a short-circuit.

• For details regarding the connections on the amplifier

side, refer to the manual that was provided with your

amplifier.

Tip

Black or black striped wires are minus (–) in polarity, and

should be connected to the minus (–) speaker terminals.

About this manual

The SA-VE445H is a 5.1 channel speaker system

consisting of two front speakers, two surround speakers,

one center speaker, and one subwoofer. It supports Sony

Digital Cinema Sound, Dolby* Pro Logic, and Dolby

Digital etc., and is thus geared towards the enjoyment of

movies.

*

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

Precautions

On safety

• Before operating the system, be sure that the operating

voltage of the system is identical with that of your local

power supply.

• The unit is not disconnected from the AC power source

as long as it is connected to the wall outlet, even if the

unit itself has been turned off.

• Unplug the system from the wall outlet if it is not to be

used for an extended period of time.

To disconnect the

cord, pull the cord by grasping the plug.

Never pull

the cord itself.

• Should any liquid or solid object fall into the system,

unplug the system’s power cord and have the system

checked by qualified personnel before operating it any

further.

• AC power cord must be changed only at the qualified

service shop.

On operation

• Do not drive the speaker system with a continuous

wattage exceeding the maximum input power of the

system.

• If the polarity of the speaker connections are not

correct, the bass tones will be weak and the position of

the various instruments obscure.

• Contact between bare speaker wires at the speaker

terminals may result in a short-circuit.

• Before connecting, turn off the amplifier to avoid

damaging the speaker system.

•

The volume level should not be turned up to

the point of distortion.

If you encounter color irregularity on a

nearby TV screen

This speaker system is magnetically shielded to allow it

to be installed near a TV set.

However, color

irregularities may still be observed on certain types of TV

sets.

If color irregularity is observed...

c

Turn off the TV set, then turn it on again after 15 to

30 minutes.

If color irregularity is observed again...

c

Place the speakers further away from the TV set.

If howling occurs

Reposition the speakers or turn down the volume on the

amplifier.

On placement

• Do not set the speakers in an inclined position.

• Do not place the speakers in locations that are:

—

Extremely hot or cold

—

Dusty or dirty

—

Very humid

—

Subject to vibrations

—

Subject to direct sunlight

• Use caution when placing the speaker on a specially

treated (waxed, oiled, polished, etc.) floor, as staining

or discoloration may result.

On cleaning

Clean the speaker cabinets with a soft cloth lightly

moistened with a mild detergent solution or water.

Do

not use any type of abrasive pad, scouring powder or

solvent such as alcohol or benzine.

If you have any questions or problems concerning your

speaker system, please consult your nearest Sony dealer.

Micro Satellite Speaker System

SA-VE445H

4-246-138-

11

(2)

WARNING

To prevent fire or shock hazard, do not expose the

unit to rain or moisture.

To prevent fire, do not cover the ventilation of the

apparatus with news papers, table-cloths, curtains, etc. And

don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

To avoid electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

NOTICE FOR THE CUSTOMERS IN THE U.S.A

This symbol is intended to alert the user

to the presence of uninsulated

“dangerous voltage” within the product’s

enclosure that may be of sufficient

magnitude to constitute a risk of electric

shock to persons.

This symbol is intended to alert the user

to the presence of important operating

and maintenance (servicing) instructions

in the literature accompanying the

appliance.

CAUTION

You are cautioned that any changes or modification not

expressly approved in this manual could void your

authority to operate this equipment.

Note to CATV system installer:

This reminder is provided to call CATV system installer’s

attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

CAUTION

Use of this applicance with some systems may present a

shock or fire hazard. Do not use with any units which

have the following marking located near output.

WARNING: HAZARDOUS ENERGY!

NOTICE FOR THE CUSTOMERS IN CANADA

CAUTION

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS

POLARIZED AC PLUG WITH AN EXTENSION CORD,

RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT

BLADE EXPOSURE.

Owner’s Record

The model and serial numbers are located on the

rear of the unit.

Record the serial number in the

space provided below.

Refer to them whenever

you call upon your Sony dealer regarding this

product.

Model No. SA-VE445H

Serial No.

ENERGY STAR

®

is a U.S. registered

mark.

As ENERGY STAR

®

Partner, Sony

Corporation has determined that this

product meets the ENERGY STAR

®

guidelines for energy efficiency.

E

e

E

e

C

E

e

E

e

Adjusting the subwoofer (

I

)

1

Set MODE according to the program

source as follows:

Source

MODE

DVD, LD, video cassette

MOVIE

or other video source

MD, CD, cassette tape

MUSIC

or other audio source

2

Rotate LEVEL to adjust the volume.

Set the volume level to best suit your

preference according to the program

source.

Notes

• Some amplifier functions for enhancing the sound may

cause distortion in the subwoofer.

If such distortion

occurs, turn off those functions.

• To enjoy high-quality sound, do not turn the

subwoofer volume too high.

• The bass sound is enhanced in MOVIE mode rather

than in MUSIC mode. Therefore, if you change the

mode to MOVIE while listening to some sources that

do not include the bass sound,

you may not be able to

get the effect.

Troubleshooting

Should you encounter a problem with your speaker

system, check the following list and take the indicated

measures.

If the problem persists, consult your nearest

Sony dealer.

There is no sound from the speaker system.

•Make sure all the connections have been

correctly made.

•Make sure the volume on the amplifier has

been turned up properly.

•Make sure the program source selector on the

amplifier is set to the proper source.

•Check if headphones are connected.

If they

are, disconnect them.

There is distortion in the subwoofer sound

output.

•Check if any sound-enhancing functions have

been activated on the amplifier.

If they have,

turn them off.

There is hum or noise in the speaker output.


correctly made.

•Make sure none of the audio components are

positioned too close to the TV set.

The sound has suddenly stopped.


correctly made.

Contact between bare

speaker wires at the speaker terminals may

cause a short-circuit.

Positioning the speakers

Location of each speaker (

D

)

Each speaker should face the listening position.

Better

surround effect will result if all speakers are set at the

same distance from the listening position.

Place the front speakers at a suitable distance to the left

and right of the television.

Place the subwoofer on either side of the television.

Place the center speaker on the top-center of the TV set.

The placement of surround speakers greatly depends on

the configuration of the room.

The surround speakers

may be placed on both sides of the listening position

A

or behind the listening position

B

.

Setting the speakers

To prevent speaker vibration or movement while

listening, attach the supplied foot pads to the bottom

four corners of the center speaker, front speakers, and

surround speakers (

E

).

Setting the center speaker (

F

)

Set the center speaker firmly on top of the TV set, making

sure it is completely level.

Setting other speakers (

G

)

For greater flexibility in the positioning of the speakers,

use the optional WS-FV10D or WS-WV10D speaker stand

(available only in certain countries).

Tip

The height of the front speakers should be adjusted to

about the center of the TV screen (

H

).

B

R

L

R

L

SPEAKER

IN

SPEAKER

OUT

e

e

E

E

eE Ee

E

e

FRONT

CENTER

R

R

L

L

SURROUND

Ee

Ee

Ee

Ee

Ee

Front (Left)

Center

Front (Right)

Subwoofer

Amplifier

Surround (Left)

Surround (Right)

10 m

(32.8 ft.)

10 m

(32.8 ft.)

3.5 m

(11.5 ft.)

3.5 m

(11.5 ft.)

3.5 m

(11.5 ft.)

2.5 m(8.2 ft.)

2.5 m(8.2 ft.)

D

A

A

B

B

Front (Right)

Center

Subwoofer

Surround (Right)

Front (Left)

Surround (Left)

Foot pads

E

H

G

F

ON/STANDBY indicator

LEVEL

MODE

MIN

MAX

MOVIE

MUSIC

POWER

ON

/

STANDBY

J

Foot pads

WS-WV10D

(for surround speakers)

AUTO

OFF

POWER

SAVE

POWER

LEVEL

MODE

I

WS-FV10D

Setting the amplifier

When connecting to an amplifier with internal multi

channel decoders (Dolby Digital, DTS**, etc.), you should

use the setup menus for the amplifier to specify the

parameters of your speaker system.

See the table below for the proper settings.

For details on

the setting procedure, refer to the manual that was

provided with your amplifier.

When “Hookup

A

” is used

(Speaker setup)

For

Set to

Front speakers

SMALL

Center speaker

SMALL

Surround speakers

SMALL

Subwoofer

ON (or YES)

When “Hookup

B

” is used

(Speaker setup)

For

Set to

Front speakers

LARGE

Center speaker

SMALL

Surround speakers

SMALL

Subwoofer

OFF (or NO)

If you use the amplifier with adjustable crossover

frequency, it is recommended to select 150 Hz (or close to

this figure) as the crossover frequency for your front,

center, and surround speakers.

** “DTS” and “DTS Digital Surround” are registered

trademarks of Digital Theater Systems, Inc.

Listening to the sound (

I

)

First, turn down the volume on the amplifier.

The

volume should be set to minimum before you begin

playing the program source.

1

Turn on the amplifier and select the

program source.

2

Press POWER on the subwoofer.

The ON/STANDBY indicator on the

subwoofer lights up green.

3

Play the program source.

Power turns on and off automatically

— Auto

power on/off function

(

J

)

When the subwoofer is on (i.e, the ON/STANDBY

indicator lights up green) and there is no signal input for

a few minutes, the ON/STANDBY indicator changes to

red and the subwoofer enters power saving mode.

While

in this mode a signal is input to the subwoofer, the

subwoofer automatically turns on (auto power on/off

function).

To turn this feature off, slide the POWER SAVE switch

on the rear panel to OFF.

Note

If you turn down the volume level of the amplifier too

low, the auto power on/off function may activate,

causing the subwoofer to enter power saving mode.

Specifications

SA-VE445H

AUDIO POWER SPECIFICATIONS

(For the U.S. model)

POWER OUTPUT AND TOTAL HARMONIC

DISTORTION:

with 6 ohm loads both channels driven, from 20 - 200 Hz;

rated 135 watts per channel minimum RMS power, with

no more than 0.8% total harmonic distortion from

250 milliwatts to rated output.

SS-MS445

(front, center, and surround speakers)

Speaker system

2 way, magnetically

shielded

Speaker units

Woofer: 5.7 cm (2

1

/

4

in.),

cone type

Tweeter: 2.5 cm (1 in.),

balanced dome type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Power handling capacity

Maximum input power:

120 watts

Sensitivity level

84 dB (1 W, 1 m)

Frequency range

120 Hz - 50,000 Hz

Dimensions (w/h/d)

Approx. 88

×

172

×

133

mm (3

1

/

2

×

6

7

/

8

×

5

1

/

4

in.), including front

grille

Mass

Approx. 1.3 kg

(2 lb 14 oz) each

SA-WMS445

(subwoofer)

Speaker system

Active subwoofer,

magnetically shielded

Speaker unit

Woofer: 20 cm (8 in.),

cone type

Enclosure type

Advanced SAW type

Reproduction frequency range

26 Hz - 200 Hz

Continuous RMS power output

135 W (6 ohms 20 Hz -

20 kHz, 0.8% THD)

120 W (6 ohms 20 Hz -

20 kHz, 0.8% THD)

(Australian model)

Inputs

LINE IN (input pin jack)

SPEAKER IN (input terminals) (U.S.A and Canadian

models only)

Outputs (U.S.A and Canadian models only)

SPEAKER OUT (output terminals)

General

Power requirements

120 V AC, 60 Hz

220 - 240 V AC, 50/60 Hz

(Australian model only)

Power consumptions

90 W

1 W (standby mode)

Dimensions (w/h/d)

Approx. 230

×

392

×

464 mm (9

1

/

8

×

15

1

/

2

×

18

3

/

8

in.), including

front grille (U.S.A and

Canadian models)

Approx. 230

×

392

×

447 mm (9

1

/

8

×

15

1

/

2

×

17

5

/

8

in.), including

front grille (Australian

model)

Mass

Approx. 13.2 kg

(29 lb 2 oz)

Supplied accessories

Foot pads (4

×

5)

Audio connecting cord (1)

Speaker connecting cords, 10 m (32.8 ft.) (2)

Speaker connecting cords, 3.5 m (11.5 ft.) (3)

Design and specifications are subject to change without

notice.

(U.S.A and Canadian models only)

Sony SA-VE445H Instructions

Sony SA-VE445H Manual

Sony SA-VE445H manual content summary: