Sony SDM-P232W Operating Instructions

Sony SDM-P232W - PREMIERPRO - 23" LCD Monitor Manual

Sony SDM-P232W manual content summary:

  • Sony SDM-P232W | Operating Instructions - Page 1
    4-093-821-01(3) (EN) TFT LCD Color Computer Display Operating Instructions US SDM-P232W © 2002 Sony Corporation
  • Sony SDM-P232W | Operating Instructions - Page 2
    open the cabinet. Refer servicing to qualified personnel only. the instructions, manual could void your SONY SDM-P232W Sony Electronics Inc. 680 Kinderkamack Road,Oradell,NJ 07649 USA 201-930-6972 This device complies with Part meeting the following specifications: SPECIFICATIONS Plug Type Nema-
  • Sony SDM-P232W | Operating Instructions - Page 3
    U.S.A. and other countries. • Windows is registered trademark of Microsoft each case in this manual. Precautions 4 Identifying parts and controls 5 Setup Troubleshooting 19 On-screen messages 19 Trouble symptoms and remedies 20 Self-diagnosis function 22 Specifications 23 http://www.sony
  • Sony SDM-P232W | Operating Instructions - Page 4
    LCD screen • Do not leave the LCD screen facing the sun as it can damage the LCD screen. Take care when you place the monitor by a window. • Do not push on or scratch the LCD . Transportation • Disconnect all cables from the monitor and grasp the support and base sections of the display stand firmly
  • Sony SDM-P232W | Operating Instructions - Page 5
    Identifying parts and controls See the pages in parentheses for further details. Front of the LCD display Rear of the display stand 9 Side view of the LCD display A 1 (Power) switch and 1 (power) indicator (pages 9, 18, 22) This switch turns the monitor on when the 1 (power) indicator lights up
  • Sony SDM-P232W | Operating Instructions - Page 6
    Rear of the LCD display 0 qa qs qd qf qg J AC IN connector (page 8) This connector connects the power cord (supplied). K Security Lock Hole The security lock hole should
  • Sony SDM-P232W | Operating Instructions - Page 7
    cable (digital RGB) • Utility/Instruction Manual CD-ROM (utility software for Windows/Macintosh, Operating Instructions) • Warranty card • Quick Setup Guide Setup 1: Connect a computer equipped with a DVI output connector (digital RGB) • Turn off the monitor and computer before connecting them
  • Sony SDM-P232W | Operating Instructions - Page 8
    to the following illustrations. x Connecting to an IBM PC/AT or compatible computer Setup 3: Connect the power cord 1 Connect the supplied power cord to the monitor's AC IN connector. 2 Connect it to a power outlet. to the HD15 input connector (analog RGB) for INPUT1 or INPUT2 1 to AC IN to the
  • Sony SDM-P232W | Operating Instructions - Page 9
    the [. The 1 (power) indicator lights up in red. MAIN POWER lights in red 2 back cover 3 2 Press the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. lights in green GB Note If you cannot bundle all of the cords and cables inside the stand
  • Sony SDM-P232W | Operating Instructions - Page 10
    frequency Vertical frequency Resolution Analog RGB 28-92 kHz Digital RGB 28-75 kHz 48-85 Hz 60 Hz 1920 × 1200 or less 1920 × 1200 or less For more information about on-screen messages, see "Trouble symptoms and remedies" on page 20. No need for specific drivers The monitor complies with the
  • Sony SDM-P232W | Operating Instructions - Page 11
    and corresponding input indicator change each time you press this button. INPUT1: Select the input signal received at the monitor's DVI-D input connector (digital RGB) for INPUT1, or at the monitor's HD15 input connector (analog RGB) for INPUT1. INPUT2: Select the input signal received at the
  • Sony SDM-P232W | Operating Instructions - Page 12
    computer, and turn them on. For the best results, wait for at least 30 minutes before making adjustments. You can make numerous adjustments to your monitor using the on-screen menu. Navigating the menu 1 Display the main menu. Press the MENU button to display the main menu on your screen. MENU
  • Sony SDM-P232W | Operating Instructions - Page 13
    PICTURE ADJUSTMENT menu You can adjust the following items using the PICTURE ADJUSTMENT menu. • Backlight • Contrast • Brightness • Color • Gamma • Smoothing PICTURE ADJUSTMENT Backlight : Contrast : Brightness : Color : Gamma : Smoothing : 100 50 50 9300K Gamma2 Standard 1: HD15 Select 1920
  • Sony SDM-P232W | Operating Instructions - Page 14
    CD-ROM software for photo images or illustrations.) Notes • When you set "Zoom" on the OPTION menu to "Real," "Smoothing" is not available. • 1920 × 1200 resolution signals are shown only in the "Real" mode and "Smoothing" is not possible. 14
  • Sony SDM-P232W | Operating Instructions - Page 15
    need to make further adjustments to the picture quality You can manually adjust the picture's sharpness (phase/pitch) and position ( monitor's HD15 input connector (analog RGB). 1 Load the Utility Disk. 2 Start the Utility Disk and display the test pattern. For Windows Click [Utility] t [Windows
  • Sony SDM-P232W | Operating Instructions - Page 16
    manually (H Center /V Center) If the picture is not in the center of the screen, adjust the picture's centering as follows. 1 Set the resolution to 1920 × 1200 on the computer. 2 Load the Utility Disk. 3 Start the Utility Disk and display the test pattern. For Windows Click [Utility] t [Windows
  • Sony SDM-P232W | Operating Instructions - Page 17
    desired item and press the OK button. Adjust the selected item according to the following instructions. x Zoom The monitor is set to display the picture on the screen in full, irrespective of the picture's mode or resolution in the default setting (Full2). You can also view the picture in its actual
  • Sony SDM-P232W | Operating Instructions - Page 18
    that match one of the factory preset modes. If you adjust the phase, pitch, and picture position manually For some input signals, the automatic picture quality adjustment function of this monitor may not completely adjust the picture position, phase, and pitch. In this case, you can set these
  • Sony SDM-P232W | Operating Instructions - Page 19
    following messages appears on the screen. To solve the problem, see "Trouble symptoms and remedies" on page 20. If "Not supported signal" appears on the screen This indicates that the input signal is not supported by the monitor's specifications. Check the following items. For more information about
  • Sony SDM-P232W | Operating Instructions - Page 20
    : 48-85 Hz (analog RGB), 60 Hz (digital RGB) Resolution: 1920 × 1200 or less If using Windows, • If you replaced an old monitor with this monitor, reconnect the old monitor and do the following. Select "SONY" from the "Manufacturers" list and select "SDM-P232W" from the "Models" list in the
  • Sony SDM-P232W | Operating Instructions - Page 21
    of the monitor. x Problem caused by a connected computer or other equipment, and not caused by the monitor • Check your graphics board manual for the proper monitor setting. • Confirm that the graphics mode (VESA, Macintosh 19'' Color, etc.) and the frequency of the input signal are supported by
  • Sony SDM-P232W | Operating Instructions - Page 22
    MENU INFORMATION 1: HD15 Model : SONY SDM-P232W Ser. No. : 1234567 Manufactured : 2002-40 Model name Serial number Week and year of manufacture Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen
  • Sony SDM-P232W | Operating Instructions - Page 23
    Specifications LCD panel Panel type: a-Si TFT Active Matrix Picture size: 23.0 inch Input signal format RGB operating frequency* Horizontal: 28-92 kHz (analog RGB) 28-75 kHz (digital RGB) Vertical: 48-85 Hz (analog RGB) 60 Hz (digital RGB) Resolution 5-35 °C Dimensions (width/height/
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

4-0
93-821-01(3)
© 200
2
Sony Corporation
TFT LCD Color
Computer Display
Operating Instructions
SDM-
P
232W
(EN)