Sony SDM-P82 Operating Instructions (primary manual)
Sony SDM-P82 Manual
 |
View all Sony SDM-P82 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SDM-P82 manual content summary:
- Sony SDM-P82 | Operating Instructions (primary manual) - Page 1
4-090-729-11 (2) (EN) TFT LCD Color Computer Display Operating Instructions US SDM-P82 © 2002 Sony Corporation - Sony SDM-P82 | Operating Instructions (primary manual) - Page 2
Customer Information Center 1-800-222-SONY (7669) or write to: Sony Customer Information Center 1 Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656 Declaration of Conformity Trade Name: Model No.: Responsible Party: Address: Telephone No.: SONY SDM-P82 Sony Electronics Inc. 680 Kinderkamack Road - Sony SDM-P82 | Operating Instructions (primary manual) - Page 3
are not mentioned in each case in this manual. Precautions 4 Identifying parts and controls 5 monitor and computer 9 Setup 6: Adjusting the tilt 10 Selecting the input signal (INPUT button 11 Customizing Your Monitor Troubleshooting 18 On-screen messages 18 Trouble symptoms and remedies 19 - Sony SDM-P82 | Operating Instructions (primary manual) - Page 4
• Disconnect all cables from the monitor and grasp the support and base sections of the display stand firmly with both hands when transporting. If you drop the monitor, you may be injured or the monitor may be damaged. • When you transport this monitor for repair or shipment, use the original - Sony SDM-P82 | Operating Instructions (primary manual) - Page 5
and controls See the pages in parentheses for further details. Front of the LCD display Side view of the LCD display Rear of the display stand 9 A 1 (Power) switch and 1 (Power) indicator (pages 9, 17, 21) This switch turns the monitor on when the 1 (power) indicator lights up in red. To turn the - Sony SDM-P82 | Operating Instructions (primary manual) - Page 6
Rear of the LCD display q; qa qs qd qf J Back cover (page 7) Remove this cover when you connect cables or cords. K DVI-D input connector (digital (page 9) Remove this cover to bundle connecting cords and cables. P Cable holder (page 9) This part secures cables and cords to the monitor. qg qh 6 - Sony SDM-P82 | Operating Instructions (primary manual) - Page 7
Before using your monitor, check that the following items are included in your carton: • LCD display • Power cord • HD15-HD15 video signal cable (analog RGB) • DVI-D video signal cable (digital RGB) • Windows Utility/Macintosh Utility Disk • Warranty card • This instruction manual Setup 1: Connect - Sony SDM-P82 | Operating Instructions (primary manual) - Page 8
to the following illustrations. x Connecting to an IBM PC/AT or compatible computer Setup 3: Connect the power cord 1 Connect the supplied power cord to the monitor's AC IN connector. 2 Connect it to a power outlet. to the HD 15 input connector (analog RGB) for INPUT1 or INPUT2 to AC IN 1 to the - Sony SDM-P82 | Operating Instructions (primary manual) - Page 9
the direction of [. The 1 (power) indicator lights up in red. MAIN POWER lights in red 2 Press the 1 (power) switch on the front right of the monitor. The 1 (power) indicator lights up in green. lights in green US 3 Note If you cannot bundle all of the cords and cables inside the stand - Sony SDM-P82 | Operating Instructions (primary manual) - Page 10
For more information about on-screen messages, see "Trouble symptoms and remedies" on page 19. No need for specific drivers The monitor complies with the "DDC" Plug & Play standard and automatically detects all the monitor's information. No specific driver needs to be installed to the computer. The - Sony SDM-P82 | Operating Instructions (primary manual) - Page 11
computer, and turn them on. Wait for at least 30 minutes before making adjustments for the best results. You can make numerous adjustments to your monitor using the on-screen menu. Navigating the menu 1 Display the main menu. Press the MENU button to display the main menu on your screen. MENU - Sony SDM-P82 | Operating Instructions (primary manual) - Page 12
operate. If the automatic picture quality adjustment function of this monitor seems to not completely adjust the picture By pressing the AUTO still need to make further adjustments to the picture quality You can manually adjust the picture's sharpness (phase/pitch) and position (horizontal/vertical - Sony SDM-P82 | Operating Instructions (primary manual) - Page 13
as follows. This adjustment is effective when the computer is connected to the monitor's HD15 input connector (analog RGB). 1 Set the resolution to 1280 × to the menu screen. and press the OK x Adjust the picture's position manually (H CENTER/V CENTER) If the picture is not in the center of the - Sony SDM-P82 | Operating Instructions (primary manual) - Page 14
x Eliminate a shift of the picture caused by the automatic picture quality adjustment (AUTO) 1 Press the MENU button. The main menu appears on the screen. 2 Press the M/m buttons to select (SCREEN) and press the OK button. The SCREEN menu appears on the screen. 3 Press the M/m buttons to select AUTO - Sony SDM-P82 | Operating Instructions (primary manual) - Page 15
to select (GAMMA) and press the OK button. The GAMMA menu appears on the screen. 3 Press the M/m buttons to select the desired mode. ZOOM The monitor is set to display the picture on the screen in full, irrespective of the picture's mode or resolution in the default setting (FULL2). You can - Sony SDM-P82 | Operating Instructions (primary manual) - Page 16
on the screen. 3 Press the M/m buttons to select the desired menu and press the OK button. Adjust the selected menu according to the following instructions. x MENU POSITION You can change the menu position if it is blocking an image on the screen. 1 Press the M/m buttons to select (MENU POSITION - Sony SDM-P82 | Operating Instructions (primary manual) - Page 17
the signals that match one of the factory preset modes. If you adjust the phase, pitch, and pictures position manually For some input signals, the automatic picture quality adjustment function of this monitor may not completely adjust the picture position, phase, and pitch. In this case, you can - Sony SDM-P82 | Operating Instructions (primary manual) - Page 18
the following messages appears on the screen. To solve the problem, see "Trouble symptoms and remedies" on page 19. If OUT OF SCAN RANGE appears on the screen This indicates that the input signal is not supported by the monitor's specifications. Check the following items. For more information about - Sony SDM-P82 | Operating Instructions (primary manual) - Page 19
If using Windows, • If you replaced an old monitor with this monitor, reconnect the old monitor and do the following. Select "SONY" from the "Manufacturers" list and select "SDM-P82" from the "Models" list in the Windows device selection screen. If "SDM-P82" does not appear in the "Models" list - Sony SDM-P82 | Operating Instructions (primary manual) - Page 20
. The monitor's information box appears. Press the MENU button again to make the box disappear. Example MENU INFORMATION MODEL : SDM-P82 SER. NO : 1234567 MANUFACTURED : 2002-40 Model name Serial number Week and year of manufacture If any problem persists, call your authorized Sony dealer and - Sony SDM-P82 | Operating Instructions (primary manual) - Page 21
If there is a problem with your monitor or computer(s), the screen appear, there is a potential monitor failure. Inform your authorized Sony dealer of the monitor's condition. If the 1 the screen. Specifications LCD panel Panel type: a-Si TFT Active Matrix Picture size: 18.1 inch Input signal - Sony SDM-P82 | Operating Instructions (primary manual) - Page 22
computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used - Sony SDM-P82 | Operating Instructions (primary manual) - Page 23
Sony Corporation Printed in Thailand
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
4-0
90
-
729
-
11
(2)
© 200
2
Sony Corporation
TFT LCD Color
Computer Display
Operating Instructions
SDM-
P82
(EN)