Sony SDM-X202 Operating Instructions
Sony SDM-X202 Manual
 |
View all Sony SDM-X202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SDM-X202 manual content summary:
- Sony SDM-X202 | Operating Instructions - Page 1
4-093-820-01(3) (EN) TFT LCD Color Computer Display Operating Instructions US SDM-X202 © 2002 Sony Corporation - Sony SDM-X202 | Operating Instructions - Page 2
Do not open the cabinet. Refer servicing to qualified personnel only. FCC with the instructions, may off and on, the user is encouraged to try to expressly approved in this manual could void your SONY SDM-X202 Sony Electronics Inc. 680 Kinderkamack Road,Oradell,NJ 07649 USA 201-930-6972 This monitor - Sony SDM-X202 | Operating Instructions - Page 3
on the monitor and computer manual. Technical Features ...18 Controlling the volume ...18 Power saving function ...19 Reducing the power consumption (ECO mode) ...19 Automatic picture quality adjustment function (analog RGB signal only) ...19 Troubleshooting ...20 On-screen messages ...20 Trouble - Sony SDM-X202 | Operating Instructions - Page 4
items such as a ballpoint pen or screwdriver. This type of contact may result in a scratched picture tube. • Note that material deterioration or LCD screen coating degradation may occur if the monitor is exposed to volatile solvents such as insecticide, or if prolonged contact is maintained with - Sony SDM-X202 | Operating Instructions - Page 5
further details. Rear of the display stand Front of the LCD display 9 q; A 1 (Power) switch and 1 (power) indicator (pages 9, 19, 23) This switch turns the monitor on when the 1 (power) indicator lights up in red. To turn the monitor off, press this switch again. If the 1 (power) indicator does - Sony SDM-X202 | Operating Instructions - Page 6
Rear of the LCD display K AC IN connector (page 8) This connector connects the R USB (Universal Serial Bus) downstream connectors (page 11) These connectors are used to connect the monitor to USB compliant peripheral devices. S USB (Universal Serial Bus) upstream connector for INPUT1 (page 11) - Sony SDM-X202 | Operating Instructions - Page 7
miniplug) • USB upstream cable • Utility/Instruction Manual CD-ROM (utility software for Windows/Macintosh, Operating Instructions) • Warranty card • Quick Setup Guide Using the supplied DVI-D video signal cable (digital RGB), connect the computer to the monitor's DVI-D input connector (digital RGB - Sony SDM-X202 | Operating Instructions - Page 8
audio equipment audio cord (supplied) IBM PC/AT or compatible computer Setup 4: Connect the power cord 1 Connect the supplied power cord to the monitor's AC IN connector. Connect it to a power outlet. xConnecting to a Macintosh 2 to the HD 15 input connector (analog RGB) for INPUT1 or INPUT2 - Sony SDM-X202 | Operating Instructions - Page 9
to select the desired input signal. The selected input signal indicator lights up and the picture appears on the screen. For more information, see "Selecting the input signal (INPUT installation of your monitor is complete. If necessary, use the monitor's controls to adjust the picture (page 12). 9 - Sony SDM-X202 | Operating Instructions - Page 10
For more information about on-screen messages, see "Trouble symptoms and remedies" on page 21. No need for specific drivers The monitor complies with the "DDC" Plug & Play standard and automatically detects all the monitor's information. No specific driver needs to be installed on the computer. The - Sony SDM-X202 | Operating Instructions - Page 11
disconnect the keyboard and re-connect it to the monitor. Notes • Not all computers and/or operating systems support USB configurations. Check your computer's instruction manual to see if you can connect USB devices. • In most cases, USB driver software needs to be installed on the host computer - Sony SDM-X202 | Operating Instructions - Page 12
computer, and turn them on. For the best results, wait for at least 30 minutes before making adjustments. You can make numerous adjustments to your monitor using the on-screen menu. Close the menu. Press the MENU button once to return to normal viewing. If no buttons are pressed, the menu - Sony SDM-X202 | Operating Instructions - Page 13
for the white color field from the default color temperature settings. Also, if necessary, you can fine tune the color temperature. PICTURE ADJUSTMENT 1: HD15 100 50 50 9300K 6500K 5000K User Adjust 1600 × 1200/60 Hz Select Set OK 1 Press the MENU button. The main menu appears on the screen. Press - Sony SDM-X202 | Operating Instructions - Page 14
. Press the M/m buttons to select , then press the OK button. The new color setting is stored in memory and automatically recalled whenever "User" is selected. The PICTURE ADJUSTMENT menu appears on the screen. Exit MENU 2 1 Press the MENU button. The main menu appears on the screen. Press the - Sony SDM-X202 | Operating Instructions - Page 15
• Input2 Priority 1600 × 1200/60 Hz Select Set OK Adjust the picture's sharpness manually (Phase/Pitch) You can adjust the picture's sharpness as follows. This adjustment is effective when the computer is connected to the monitor's HD15 input connector (analog RGB). 1 2 Load the Utility Disk. Start - Sony SDM-X202 | Operating Instructions - Page 16
Adjust the picture's position manually (H Center /V Center) If the picture is not in the center of the screen, adjust the picture's centering as follows. x Selecting the input priority When connecting computers to both of the monitor's video input connectors for INPUT2 (DVI-D and HD15), you can - Sony SDM-X202 | Operating Instructions - Page 17
the selected item according to the following instructions. Select the audio input when connecting to both of the monitor's audio input jacks for INPUT1 and ratio. Therefore, black bands may appear at the top and bottom of the picture, depending on the signal. • Real: The input signal is displayed on - Sony SDM-X202 | Operating Instructions - Page 18
• : Russian • : Japanese Technical Features Controlling the volume Using the monitor's speakers or headphones, you can listen to sound from your computer or volume when the main menu is displayed on the screen. • When your monitor is in power saving mode, no sound comes from the speakers or the - Sony SDM-X202 | Operating Instructions - Page 19
function of this monitor may not completely adjust the picture position, phase, and pitch. In this case, you can set these adjustments manually (page 15). If you set these adjustments manually, they are stored in memory as user modes and automatically recalled whenever the monitor receives the same - Sony SDM-X202 | Operating Instructions - Page 20
appears on the screen Troubleshooting Before contacting technical support, refer to this problem, see "Trouble symptoms and remedies" on page 21. Cable disconnected Go to power save If "Not supported signal" appears on the screen This indicates that the input signal is not supported by the monitor - Sony SDM-X202 | Operating Instructions - Page 21
Trouble symptoms and remedies If a problem occurs as a result of a connected computer or other equipment, refer to the connected computer/equipment's instruction manual. Use the self-diagnosis function (page 23) if the following recommendations do not resolve the problem. Symptom No picture If the 1 - Sony SDM-X202 | Operating Instructions - Page 22
monitor • Check your graphics board manual for the proper monitor setting. • Confirm that the graphics mode (VESA, Macintosh 19'' Color, etc.) and the frequency of the input signal are supported by this monitor turning on the monitor. Adjust the gamma using "Gamma" on the PICTURE ADJUSTMENT menu ( - Sony SDM-X202 | Operating Instructions - Page 23
Sony dealer and give the following information: • Model name: SDM-X202 • Serial number • Detailed description of the problem • Date of purchase • Name and specifications of your computer and graphics board • Type of input signals (analog RGB/digital RGB) 1 (power) indicator If the picture - Sony SDM-X202 | Operating Instructions - Page 24
Specifications Panel type: a-Si TFT Active Matrix Picture size: 20.1 inch Input signal format RGB operating frequency* Horizontal: 28-92 kHz (analog RGB) 28-75 kHz ( . • Vertical blanking width should be more than 450 µsec. Design and specifications are subject to change without notice. LCD panel 24
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
4-0
93-820-01(3)
© 200
2
Sony Corporation
TFT LCD Color
Computer Display
Operating Instructions
SDM-
X
202
(EN)