Sony SLV-M11HF Operating Instructions
Sony SLV-M11HF - Video Cassette Recorder Manual
 |
View all Sony SLV-M11HF manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SLV-M11HF manual content summary:
- Sony SLV-M11HF | Operating Instructions - Page 1
regarding this product. Model No Serial No Declaration of Conformity Trade Name: SONY Model No.: SLV-M11HF Responsible Party: Sony Electronics Inc. Address: 1 Sony Drive, Park Ridge, NJ.07656 USA Telephone No.: 201-930-6970 This device complies with Part 15 of the FCC Rules. Operation - Sony SLV-M11HF | Operating Instructions - Page 2
and maintenance (servicing) instructions in the literature fully into the outlet, contact your Sony dealer. Installing • Allow adequate air a warm location, moisture may condense inside the VCR and cause damage to the video head and expressly approved in this manual could void your authority - Sony SLV-M11HF | Operating Instructions - Page 3
TV programs using the VCR Plus+* GOLD system 16 Setting the timer manually Additional Operations 20 Playing/ the picture 34 Changing menu options 37 Editing with another VCR Troubleshooting 69 Specifications 70 Index to parts and controls 75 Index back cover Quick reference to using the VCR * VCR - Sony SLV-M11HF | Operating Instructions - Page 4
789 0 Z EJECT DISPLAY CLEAR X PAUSE SMART CUE H PLAY M FF x STOP m REW 1 Turn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. 4 Basic Operations - Sony SLV-M11HF | Operating Instructions - Page 5
stops searching, rewinds a few seconds, then resumes normal playback. If you press and hold SMART CUE while the VCR is skip searching, the VCR will stop searching, and continue rewinding until you release SMART CUE. Tip • You can change the length of rewinding time on the ADVANCED OPTIONS menu. - Sony SLV-M11HF | Operating Instructions - Page 6
VTR 123 To display the counter on the TV screen, press DISPLAY. Notes • Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed. • While setting the menu on the TV screen, you cannot use H PLAY, X PAUSE, M FF, m REW, or x STOP - Sony SLV-M11HF | Operating Instructions - Page 7
Recording TV programs 123 456 789 0 DISPLAY TV/VIDEO COUNTER/ REMAIN SP/EP Number buttons, ENTER CH +/- z REC INPUT SELECT x STOP Basic Operations 1 Turn on your TV and set it to the video channel. To record from a cable box, turn it on. 2 Insert a tape with its safety tab in place. - Sony SLV-M11HF | Operating Instructions - Page 8
select the tape speed, SP or EP. EP (Extended Play) provides recording time three times as long as SP (Standard Play), however, SP produces better picture and audio quality. STEREO SAP VIDEO LP SP EP APC EDIT BLANK AV INSERT VTR 123 6 REC Press z REC to start recording. The recording indicator - Sony SLV-M11HF | Operating Instructions - Page 9
the VIDEO indicator in the display window. 2 If the TV is connected to the VCR's LINE OUT jacks, set the TV to TV input; if not, skip this shuttle ring clockwise for higher channels or counterclockwise for lower channels. The VCR switches the channel in the preset order. To save a recording To - Sony SLV-M11HF | Operating Instructions - Page 10
) Tips • To select a channel, you can use the number buttons on the remote commander. Enter the channel number, then press ENTER. • You can select a video . • It may take up to one minute for the VCR to calculate and display the remaining tape length after you press DISPLAY. 10 Basic Operations - Sony SLV-M11HF | Operating Instructions - Page 11
Locating a channel by Station ID You can select the TV program from station ID. Before you start... • Set FAVORITE CH to OFF in the ADVANCED OPTIONS menu (page␣35). 123 456 789 0 ENTER CH +/- Basic Operations 1 Turn on your TV and set it to the video channel. To record from a cable box, turn - Sony SLV-M11HF | Operating Instructions - Page 12
Locating a channel by Station ID (continued) 2 ENTER 3 • CH 4 ENTER Press ENTER. The station ID appears on the TV screen. 3 AAB 9 CDE 10 FGH 12 IJK 13 LMN 15 OPQ 19 RST 22 UVW 43 XYZ 45 ABB Press CH +/- to select the station ID you want. Press ENTER. The selected station ID 3 - Sony SLV-M11HF | Operating Instructions - Page 13
+ GOLD system Just enter the PlusCode number listed in the TV program guide. The date, time and channel number of that program are set automatically. You can preset up to eight programs at a time. Before you start... • Check that the VCR clock is set to the correct time. • Turn on your TV - Sony SLV-M11HF | Operating Instructions - Page 14
select ONCE, DAILY, or WEEKLY, then press ENTER: To record Only once Everyday Monday to Friday Once a week Select ONCE DAILY WEEKLY VCR Plus+ P l u s Co d e SP / EP 53292--- SP RECORDING TIME DATE START STOP CH 9 / 3 0 THU 8 : 0 0 PM 11 : 3 0 PM 5 2 EP To s e t t i me r, p u s h POWER To - Sony SLV-M11HF | Operating Instructions - Page 15
recording, press VCR Plus+ before pressing ENTER in step 4 above. • When you are recording a program in the SP mode and the remaining tape becomes shorter than the recording time, the tape speed is automatically changed to the EP mode. Note that some noises will appear on the picture when the tape - Sony SLV-M11HF | Operating Instructions - Page 16
Setting the timer manually If the VCR Plus+ GOLD system is not available in your area, follow the instructions below to set the timer to record programs. Before you start... • Check that the VCR clock is set to the correct time. • Turn on your TV and set it to the video channel. When using a cable - Sony SLV-M11HF | Operating Instructions - Page 17
line. To enter another setting, select the next line and repeat step 3. 5 PLAY OK Press OK. Basic Operations 6 Press `/1 to turn off the VCR. The indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. continued Basic Operations 17 - Sony SLV-M11HF | Operating Instructions - Page 18
Setting the timer manually (continued) To stop recording To stop the VCR while recording, press x STOP. month later t (date counts down) t the current date To use the VCR after setting the timer To use the VCR before a timer recording begins, just press `/1. The indicator disappears from the display - Sony SLV-M11HF | Operating Instructions - Page 19
automatically changed to the EP mode. Note that some noises will appear on the picture when the tape speed is changed. If you want to keep the tape the Blank Time space" (page␣47). Notes • If you are using cable box control, you cannot select "LINE1" or "LINE2". • The station ID appears on the TV - Sony SLV-M11HF | Operating Instructions - Page 20
FF H PLAY JOG M FF m REW Shuttle ring Playback options View the picture during fast-forward or rewind Play at high speed Play at twice the normal hold down m REW/m REW. • During playback, press M FF or m REW on the remote commander. • During playback, hold down M FF/M FF or m REW/m REW. When you - Sony SLV-M11HF | Operating Instructions - Page 21
Rewind and start play Operation During pause, press M FF or m REW on the remote commander. Hold down the button to play one frame each second. During stop, press H PLAY on the VCR while holding down m␣REW on the VCR. To resume normal playback Press H PLAY. Using the shuttle ring With the shuttle - Sony SLV-M11HF | Operating Instructions - Page 22
while pausing. To set tracking to the center position, press both buttons (+/-) at the same time. Notes • The sound is muted during these operations. • Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the picture quality cannot be guaranteed. • The picture may have snow - Sony SLV-M11HF | Operating Instructions - Page 23
Creating a favorite channel list with Station ID You can create your favorite channel list of the TV channels with station ID. You can store up to 10 channels with station ID and select the channel from your favorite channel list. Before you start... • Set FAVORITE CH to ON in the ADVANCED OPTIONS - Sony SLV-M11HF | Operating Instructions - Page 24
Creating a favorite channel list with Station ID (continued) 3 Press - Sony SLV-M11HF | Operating Instructions - Page 25
Selecting a channel from your favorite channel list 123 456 789 0 ENTER CH +/- 1 Turn on your TV and set it to the video channel. To choose a channel from a cable box, turn the cable box on. 2 Press ENTER. FAVORITE CH Your FAVORITE CH screen appears on the TV screen. 12 IJK 15 OPQ 27 BBA - Sony SLV-M11HF | Operating Instructions - Page 26
To extend the duration Press z REC repeatedly to set a new duration. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to normal recording mode. To stop while recording Press x STOP. Note • You cannot display the current tape time in the display window - Sony SLV-M11HF | Operating Instructions - Page 27
`/1 CLEAR MENU M/m/ - Sony SLV-M11HF | Operating Instructions - Page 28
cursor appears at the beginning of the line. • To cancel the setting, press CLEAR. 4 Press OK. If any timer settings remain, turn off the VCR to return to recording standby. When the timer settings overlap The program that starts first has priority and the second program starts recording only after - Sony SLV-M11HF | Operating Instructions - Page 29
OPTIONS menu to OFF. The sound will be recorded in monaural (on both hi-fi and normal audio tracks) but with less noise. For details, see page 34. Recording bilingual programs Normally, this VCR records only the main sound. When a SAP (Second Audio Program) is received, the SAP indicator lights up - Sony SLV-M11HF | Operating Instructions - Page 30
on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Normal audio track Hi-fi audio track (main track) Monaural sound Stereo sound - Sony SLV-M11HF | Operating Instructions - Page 31
signals ahead or behind you want to search: • To search ahead, press > INDEX SEARCH. • To search backwards, press . INDEX SEARCH. I NDEX 8 SEARCH The VCR starts searching and the index number on the TV screen counts down to zero. Playback starts automatically from that point. To stop searching - Sony SLV-M11HF | Operating Instructions - Page 32
Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. In this case, manually adjust the tracking. Press the - Sony SLV-M11HF | Operating Instructions - Page 33
About the Adaptive Picture Control (APC) function The Adaptive Picture Control (APC) function automatically improves recording and playback quality by adjusting the VCR to the condition of the video heads and tape. To maintain better picture quality, we recommend that you set APC to ON in the - Sony SLV-M11HF | Operating Instructions - Page 34
OPTIONS page3 FAVORITE CH DEFAULT SPEED BLANK SEARCH SMARTFILE LIST ON OFF EP MANUAL MANUAL Use t o se l ec t an i t e m, t VCR input. • ON to receive stereo programs. • OFF to reduce noise. The sound changes to monaural. • ON to listen to the sound recorded on hi-fi and normal audio tracks - Sony SLV-M11HF | Operating Instructions - Page 35
Audio Program) sound on both hi-fi and normal audio tracks. L (Low) through H (High) to adjust the sharpness of the picture. L to turn off the sharpness control. • ON to switch on the APC (Adaptive Picture Control) function and improve picture quality. • OFF to switch off APC. • ON to make the - Sony SLV-M11HF | Operating Instructions - Page 36
Changing menu options (continued) Menu option BLANK SEARCH SMARTFILE LIST Set this option to • MANUAL to display a screen asking whether to search for the Blank Time when the timer is set. • AUTO to set the VCR to perform the Blank Time search automatically each time the timer is set. • OFF to - Sony SLV-M11HF | Operating Instructions - Page 37
S OUT jack for synchronized editing Hook up to record on the other VCR, then connect the VCRs via the CONTROL S jacks. The CONTROL S connection lets you control (pause and release pause) both VCRs from the recording VCR. Notes • Make sure you connect the plugs to jacks of the same color. • If - Sony SLV-M11HF | Operating Instructions - Page 38
start recording with the APC function. To record a tape with the APC function, press z REC again during recording pause in step 3 so that the VCR analyzes the tape. Then when you start recording in step 4, press X PAUSE immediately after the APC indicator stops flashing. If you press X PAUSE before - Sony SLV-M11HF | Operating Instructions - Page 39
you want to watch using the SmartFile search list. The VCR locates the program and playback starts automatically. Checking the contents of CH 8 p . 1 1H48M 8 /30 8 /29 8 /27 8 /27 8 /26 8 /24 NEXT : QUIT : OK * SmartFile is a trademark of Sony Corporation. continued SmartFile Function 39 - Sony SLV-M11HF | Operating Instructions - Page 40
want to play it back. Also, once you label a program which you set to record regularly (i.e. everyday, same day of a week, etc.), the VCR recognizes the label and will automatically label all future recordings of the same program. Protecting a recorded program (page 58) You can protect a recorded - Sony SLV-M11HF | Operating Instructions - Page 41
the SmartFile label so that it doesn't bend, attach it along the guide line to the spine SMARTFILE SENSOR of the cassette tape. This tape customers in Canada Additional SmartFile labels can be purchased at Sony of Canada Ltd. Authorized VHS Dealers. Notes • The SmartFile label is equipped with - Sony SLV-M11HF | Operating Instructions - Page 42
on the SmartFile tape When recording a program on the SmartFile tape, no matter what method you use to record the program (normal recording, the VCR Plus+ GOLD system recording, etc.), program data (date, channel, recording start time, etc.) is stored in the memory of the SmartFile label. The - Sony SLV-M11HF | Operating Instructions - Page 43
Channel Mapping and the VCR receives the program information signal (see page 54 of the supplied hookup/setup manual). • When the VCR receives the program the normal recording mode while CABLE MOUSE is set to ON in the CABLE BOX CONTROL menu, the channel number is stored as "CH- - -". • When you - Sony SLV-M11HF | Operating Instructions - Page 44
. If there is a recorded program after the Blank Time space, the VCR will record over that program unless you stop recording. If there is a M/m OK 1 Insert a SmartFile tape with its safety tab in place. The VCR turns on and the SMARTFILE indicator lights up. 2 Press SMARTFILE. The SmartFile search - Sony SLV-M11HF | Operating Instructions - Page 45
0 PM CH 1 6 FRI 8 : 0 0 PM CH 1 2 TUE 2 : 3 0 PM CH 8 START p . 1 SP 0 H 3 6 M 8 /16 0 H 3 0 M SP 8 /13 0 H 5 0 M SP 8 /10 0 H 3 0 M EP END 5 Press OK. The VCR goes to the beginning of the Blank Time space and stops. SEARCHING 6 Start recording. START END If the recordings overlap If a newly - Sony SLV-M11HF | Operating Instructions - Page 46
Recording using the SmartFile function (continued) • If the second program starts recording 15 minutes or more in EP mode or 5␣minutes or more in SP mode after the first program starts, the data for both programs appears. In this case, the stored program's recording time is updated to the time when - Sony SLV-M11HF | Operating Instructions - Page 47
to the beginning of the Blank Time space and stands by for recording. If there is a recorded program after the Blank Time space, the VCR will record over that program unless you stop recording. If there is a program you want to prevent from being recorded over or erased, protect that - Sony SLV-M11HF | Operating Instructions - Page 48
using the SmartFile function (continued) • When setting the timer manually (for details, see page 16): 1 Press MENU, then Press - Sony SLV-M11HF | Operating Instructions - Page 49
• If the remaining length of the first program is 15 minutes or less in EP mode or 5␣minutes or less in SP mode after being overwritten by the second program, the first program data is erased. Program 1 Program 2 15 minutes or less in EP mode, 5 minutes or less in SP mode Information will be - Sony SLV-M11HF | Operating Instructions - Page 50
up to 12 programs. Before you start... • Turn on your TV and set it to the video channel. SMARTFILE M/m OK 1 Insert a SmartFile tape. The VCR turns on and the SMARTFILE indicator lights up. 2 Press SMARTFILE. The SmartFile search list appears on the TV screen. The BLANK indicator lights up and - Sony SLV-M11HF | Operating Instructions - Page 51
Tip • If you set SMARTFILE LIST to AUTO in the ADVANCED OPTIONS menu, the SmartFile search list appears automatically when you insert a SmartFile tape (see page 36). Note • You may not be able to locate the beginning of the selected program correctly when: - the SmartFile tape contains one or more - Sony SLV-M11HF | Operating Instructions - Page 52
TIME remaining tape display changes. • You can also use the M/m and OK buttons on the remote commander. • If you press a button other than SP/EP or OK, the SmartFile check list . • If you press OK on the remote commander while a tape is inserted into the VCR, playback starts. 52 SmartFile Function - Sony SLV-M11HF | Operating Instructions - Page 53
a category Before you start... • Turn on your TV and set it to the video channel. 123 456 789 0 CLEAR MENU M/m/, OK 1 Insert a SmartFile tape. The VCR turns on and the SMARTFILE indicator lights up. continued SmartFile Function 53 - Sony SLV-M11HF | Operating Instructions - Page 54
Labeling a recorded program and tape (continued) 2 Press MENU, then press M/m to select SMARTFILE EDIT and press OK. The SMARTFILE EDIT menu appears. 3 Press M/m to select a program. 4 Press ,. The cursor moves to the program label input position. 5 Label the program. 1 Press M/m to select a - Sony SLV-M11HF | Operating Instructions - Page 55
program Once you label a program which is set to record regularly (i.e. everyday, same day of the week, etc.) in the VCR Plus+ GOLD system or timer recording mode, the VCR recognizes the label and will automatically label all future recordings of the same program. The set label is assigned even when - Sony SLV-M11HF | Operating Instructions - Page 56
Labeling a recorded program and tape (continued) Labeling a tape Before you start... • Turn on your TV and set it to the video channel. 123 456 789 0 CLEAR MENU 1 Insert a SmartFile tape. 2 Press MENU, then press M/m to select SMARTFILE EDIT and press OK. The SMARTFILE EDIT menu appears. 3 Press - Sony SLV-M11HF | Operating Instructions - Page 57
4 Press ,. The cursor moves to the tape title input position. 5 Label the tape. 1 Press M/m to select a character. Each time you press m, the character changes as shown below. A t B t ... t Z t symbol t 0 t 1t... 9tatbt...tzt (blank space) If you make a mistake, press CLEAR. 2 To set the next - Sony SLV-M11HF | Operating Instructions - Page 58
the protected program. Before you start... • Turn on your TV and set it to the video channel. SMARTFILE M/m/, 1 Insert a SmartFile tape. The VCR turns on and the SMARTFILE indicator lights up. 2 Press SMARTFILE. The SmartFile search list appears on the TV screen. The BLANK indicator lights up - Sony SLV-M11HF | Operating Instructions - Page 59
program, locate the beginning of the Blank Time space by following the instructions in "Recording after locating the Blank Time space" on page 44. new tape, the VCR will analyze the position of the protected program for a few seconds. You cannot operate the VCR while the VCR is analyzing the tape. - Sony SLV-M11HF | Operating Instructions - Page 60
you start... • Turn on your TV and set it to the video channel. 123 456 789 0 DISPLAY CLEAR SMARTFILE M/m 1 Insert a SmartFile tape. The VCR turns on and the SMARTFILE indicator lights up. 2 Press SMARTFILE. The SmartFile search list appears on the TV screen. The BLANK indicator lights up and - Sony SLV-M11HF | Operating Instructions - Page 61
tape (see page␣36). Notes • You cannot erase a protected program from the SmartFile list. You have to first unlock the protected program by following the instructions in "To unlock the protected program" on page 59, then erase that program from the list. • If a program is left about 15 minutes or - Sony SLV-M11HF | Operating Instructions - Page 62
a recorded tape in the SmartFile label The VCR will register programs recorded on a tape in the from the start of the tape. The 13th and subsequent programs are ignored. You can manually name the registered program numbers and select the category (see page 53). SMARTFILE GENERATOR Before you - Sony SLV-M11HF | Operating Instructions - Page 63
label that already contains program data. However, the recorded date and time, program name and information input manually (such as the program label and category) are replaced with "Program No. XX". • If the recording. - you use tapes recorded in the LP mode on other VCRs. SmartFile Function 63 - Sony SLV-M11HF | Operating Instructions - Page 64
VHF/UHF IN LINE-1 IN AUDIO R/L/ VIDEO Audio/video cable (not supplied) LINE OUT AUDIO/VIDEO CPD IN VHF/UHF OUT Monaural cable (supplied) VCR CONTROL Coaxial cable (supplied) VHF/UHF IN To TV DIRECTV digital satellite receiver VHF/UHF OUT Coaxial cable (not supplied) 64 SmartFile Function - Sony SLV-M11HF | Operating Instructions - Page 65
brand number on the DIRECTV digital satellite receiver. For example, select "99" in the VCR CONTROL menu to use a Sony VCR with the SmartFile function. For details, refer to the instruction manual of your DIRECTV digital satellite receiver. Storing program data on the SmartFile tape When you record - Sony SLV-M11HF | Operating Instructions - Page 66
Information Troubleshooting If you have any questions or problems not covered below, please consult your nearest Sony dealer. Symptom Remedy The `/1 switch does not function. • Connect the AC power cord securely. • Make sure the VCR is not locked. To unlock, hold down `/1 POWER on the VCR until - Sony SLV-M11HF | Operating Instructions - Page 67
• Check that the cable box is turned on. • The clock stops if the VCR is disconnected from the wall outlet for more than one hour. Reset the clock and timer. • When you use cable box control, make sure the CABLE BOX CONTROL option is set to ON. continued Timer recording Additional Information 67 - Sony SLV-M11HF | Operating Instructions - Page 68
Troubleshooting (continued) Others Symptom A tape cannot be inserted. The remote commander does not function. The channels on the VCR cannot be changed. The tracking meter does not appear on the screen. You cannot control other TVs. The SMARTFILE screen appears when a tape is not inserted. The VCR - Sony SLV-M11HF | Operating Instructions - Page 69
VHS according to the brand and/or type of tape or the operating condition of the VCR. Tuner section Channel coverage VHF 2 to 13 UHF 14 to 69 CATV A-8 1/8 inches) including projecting parts and controls Mass Approx. 4.5 kg (9 lb 15 oz) Supplied accessories Remote commander (1) Size AA (R6) batteries - Sony SLV-M11HF | Operating Instructions - Page 70
parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel 1 `/1 POWER switch/indicator (14) 2 Remote sensor 3 qj X PAUSE button (5, 38) qk OK button (16, 45, 52) ql CHANNEL/TRACKING +/- buttons (8, 32) w; EDIT button (38) wa REALITY REGENERATOR button (32) ws - Sony SLV-M11HF | Operating Instructions - Page 71
(29) 4 SAP (Second Audio Program) indicator (29) 5 VIDEO indicator (9) 6 Tape speed indicator (8) 7 APC (Adaptive Picture Control) indicator (33) 8 EDIT indicator (38) 9 BLANK indicator (44) 0 Tracking indicator (32) qa Line/channel indicator (8, 38) qs Time counter/clock indicator (6) qd Remaining - Sony SLV-M11HF | Operating Instructions - Page 72
(continued) Rear panel 1 AC power cord 2 S-LINK (CONTROL S IN) jack (37) 3 CABLE BOX CONTROL (CONTROL S OUT) jack 4 LINE-1 IN AUDIO R/L/VIDEO jacks (37, 64) 5 CPD (Control and Program Data) IN jack (64) 6 VHF/UHF IN connector (64) 7 VHF/UHF OUT connector (64) 8 RF (Radio Frequency) UNIT switch - Sony SLV-M11HF | Operating Instructions - Page 73
Remote commander 123 456 789 0 1 TV RECEIVER / VIDEO switch 2 Z EJECT button (5) 3 TV/VIDEO button (9) 4 DISPLAY button (9) 5 SP (Standard Play)/EP (Extended Play) button (8, 45) 6 ×2/RECEIVER VOL ( - Sony SLV-M11HF | Operating Instructions - Page 74
Index to parts and controls (continued) 123 456 789 0 qf `/1 (power) switch (14) qg COUNTER/REMAIN button (9) qh AUDIO MONITOR button (29) qj VCR Plus+ button (13) qk CLEAR button (6, 14, 28, 57) ql Number buttons (14) w; ENTER button (12, 14, 23) wa CH (channel) +/- buttons (8) ws VOL (volume) - Sony SLV-M11HF | Operating Instructions - Page 75
option 34 APC (Adaptive Picture Control) 33 Audio track 30 Auto Tape Speed 35 C Child Lock 15 Cleaning the video heads 66 Counter 6 D DIRECTV System 64 Dubbing. See Editing. E Editing 37 EP mode 8 F, G Favorite channel 23 H Hi-fi audio track 30 I, J, K Index Search 31 L Locking the VCR 15 LP mode - Sony SLV-M11HF | Operating Instructions - Page 76
picture on your TV, press the VCR's TV/VIDEO button until the VIDEO indicator comes on in the display window. To record a program 1 Press VCR Plus+ on the remote , you may call: Sony Customer Information Center 1-800222-SONY (7669) or write to: Sony Customer Information Center Sony Drive, Mail Drop #
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
3-865-760-
11
(1)
Video Cassette
Recorder
©1999 by Sony Corporation
SLV-M11HF
Operating Instructions
Owner’s record
The model and serial numbers are located at the rear of the
unit. Record these numbers in the spaces provided below.
Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. _________________________
Serial No.
_________________________
Declaration of Conformity
Trade Name:
SONY
Model No.:
SLV-M11HF
Responsible Party:
Sony Electronics Inc.
Address:
1 Sony Drive, Park Ridge, NJ.07656 USA
Telephone No.:
201-930-6970
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
For hookup and setup, see the supplied hookup/setup manual.