Sony SMP-N100 Operating Instructions - Page 19

Settings and Adjustments z • When connecting the HDMI OUT jack and other video output jacks at the same time, select "Component Video." • If no picture appears when setting "HDMI" or "Component Video" resolution, try another resolution setting. YCbCr/RGB (HDMI) Auto Automatically detects the connected TV type, and switches to the matching color setting. YCbCr (4:2:2) Outputs YCbCr 4:2:2 video signals. YCbCr (4:4:4) Outputs YCbCr 4:4:4 video signals. RGB Outputs RGB video signals. HDMI Deep Color Output Auto Normally select this. 12bit 10bit Outputs 12bit/10bit video signals when the connected TV is compatible with Deep Color. Off Select this when the picture is unstable or colors appear unnatural. Pause Mode Auto Frame Normally select this. Dynamic moving pictures appear without blurring. Displays static pictures at high resolution. Audio Settings Audio (HDMI) Auto PCM Normally select this. Outputs audio signals according to the status of the connected HDMI device. Outputs PCM signals from the HDMI OUT jack. Dolby Digital Downmix PCM Dolby Digital Converts to output Linear PCM signals. Select this when connecting an audio device without a built-in Dolby Digital decoder. Select this when connecting an audio device with a builtin Dolby Digital decoder. DTS Downmix PCM DTS Converts to output Linear PCM signals. Select this when connecting to an audio device without a built-in DTS decoder. Select this when connecting to an audio device with a built-in DTS decoder. Audio DRC Auto Standard Wide Range Performs playback at the dynamic range specified by the current file. Performs playback at a standard compression level. No compression works. A more dynamic sound is produced. ,continued 19