Sony SNC-VL10N User Guide
Sony SNC-VL10N Manual
 |
View all Sony SNC-VL10N manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SNC-VL10N manual content summary:
- Sony SNC-VL10N | User Guide - Page 1
3-619-676-13 (1) Network Camera User's Guide Software Version 1.4 SNC-VL10N/VL10P © 2002 Sony Corporation - Sony SNC-VL10N | User Guide - Page 2
used in accordance with the instructions, may cause harmful interference SONY (7669) or Write to: Sony Customer Information Services Center 6900-29, Daniels Parkway, PMB 330 Fort Myers, Florida 33912 Declaration of Conformity Trade Name: SONY Model: SNC-VL10N SNC-VL10P Responsible Party: Sony - Sony SNC-VL10N | User Guide - Page 3
DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR - Sony SNC-VL10N | User Guide - Page 4
Manual 5 Precautions 5 Operating the Camera Logging In to Homepage - Login Page 6 Configuration of Main Viewer Page 7 Menu Section 7 Image Control Section 8 Monitoring the Image from the Camera ... 12 When You Have Trouble - FAQ Page 12 Administrating the Camera Logging in as Administrator 13 - Sony SNC-VL10N | User Guide - Page 5
, contact your authorized Sony dealer. About the MAC address The MAC address of the camera may change when the main board has been replaced by the service personnel. About the software For the latest software information, contact your authorized Sony dealer. 5 How to Use This Manual / Precautions - Sony SNC-VL10N | User Guide - Page 6
computer and type the IP address of the camera you want to monitor. The Login page of Network Camera SNC-VL10 is displayed. 2 Type your user name Version Displays the camera software version. Notes • When you jump to another page, viewer or setting menu, use the buttons on this software. The use of - Sony SNC-VL10N | User Guide - Page 7
See "When You Have Trouble - FAQ Page" on camera image using Netscape Navigator Ver. 4.7, click this item to open the "Plugin Download page." (Downloading is required only for the first time you access the camera.) For details, see "About Viewers" on page 8. Version Displays the camera software - Sony SNC-VL10N | User Guide - Page 8
to download the plugin for Netscape Navigator stored in the camera. When you log in the camera using Netscape Navigator for the first time, the "Plugin Download" page appears. Click Download SNC-VL10 Plug-in Now! and follow the instructions on the screen. Plugin Download page 8 Monitoring the Image - Sony SNC-VL10N | User Guide - Page 9
the maximum number of frames as possible for the connected line. The maximum frame rate is 30 fps for the SNC-VL10N, and 25 fps for the SNC-VL10P. Note If heat builds up inside the camera, the images are transmitted at 1 fps although another frame rate value is 9 Monitoring the Image from the - Sony SNC-VL10N | User Guide - Page 10
Sony dealer. Displaying the monitor image in monochrome Select the Monochrome check box. By removing the check mark, the color monitor image is restored sensor output 1 of the Sensor I/O port located on the rear panel of the camera. When you click Sensor 2, the alarm is output from sensor output 2 of - Sony SNC-VL10N | User Guide - Page 11
.) Note Capture does not appear in the menu when you view the monitor image using the Java Applet viewer. 11 Monitoring the Image from the Camera - Sony SNC-VL10N | User Guide - Page 12
monochrome. See "Displaying the monitor image in monochrome" on page 10. When You Have Trouble - FAQ Page Click FAQ in the menu control section of the viewer, and the FAQ this page when you have trouble with the camera. 12 Changing the Access Right - Re-login Page / When You Have Trouble - FAQ Page - Sony SNC-VL10N | User Guide - Page 13
explains how to set the functions of the camera by the Administrator. For monitoring the camera image, see "Operating the Camera" on page 6. Logging in as Administrator If you log in as Administrator, you can perform all the settings of the software. To log in as Administrator, operate as follows - Sony SNC-VL10N | User Guide - Page 14
to make the set values invalid and restore the previous settings. Help Click this button camera. SW Version Displays the camera software version. Installation Location Type the installation location of the camera -year). SNC-VL10 Current Date&Time Displays the date and time set on the camera. You - Sony SNC-VL10N | User Guide - Page 15
to the time in the area where the camera is installed, select the camera location from the drop-down list. The Number of Supported Clients Type the maximum number of clients (1 to 100) that can log in this camera at the same time. Factory Default Resets to the factory settings. Click Factory Setting - Sony SNC-VL10N | User Guide - Page 16
Setting page. The access right for Administrator is fixed to All, allowing access to all the functions of the software. Auto Login Allows direct logging in the camera without displaying the Login page, affording the access right for the user specified in Auto Login User box. Select Enable to enable - Sony SNC-VL10N | User Guide - Page 17
Type the default gateway. MAC Address Displays the MAC address of the camera. Select MTU Size Select the MTU (Maximum Transmission Unit) from the see "LAN" on page 17. MAC Address Displays the MAC address of the camera. User ID Type the user ID for Internet connection. Password Type the password - Sony SNC-VL10N | User Guide - Page 18
the protocol being used for the xDSL connection or PPPoE (Point-to-Point Protocol over Ethernet). MAC Address Displays the MAC address of the camera. User ID Type the user ID for Internet connection. Password Type the password for Internet connection. Apply/Cancel/Help See "Buttons common to every - Sony SNC-VL10N | User Guide - Page 19
addressed specified below only. IP/Subnet Client Address 0 to 9 Type the IP addresses and subnet addresses you want to allow or deny access to the camera. You can specify up to 9 IP addresses and subnet addresses. For a subnet address, type 0 to 31. To temporarily cancel the Default Policy for an IP - Sony SNC-VL10N | User Guide - Page 20
time from the To drop-down list. Note This item is effective only when Flickerless Mode is On. Calibration Parameters Adjusts the image from the camera. Type the adjustment value in each box. The adjustment range for each item is displayed on the right of the box. Brightness Adjust the brightness - Sony SNC-VL10N | User Guide - Page 21
same as when you click the Capture icon on the image control section. (See "Capturing the monitor image" on page 10.) Camera Installation Angle Rotates the monitor image according to the camera angle. Select Normal, 90 deg, 180 deg, or 270 deg from the drop-down list. Note The monitor image output - Sony SNC-VL10N | User Guide - Page 22
to an Email. It is fixed to 360 × 243 for the SNC-VL10N, or 360 × 288 for the SNC-VL10P. Naming Method Set the form of naming the image file to 999, to the file name. The number is reset to 000 when you click Apply on the SMTP Setting page. Manual Assigned Name Type the file name up to 36 - Sony SNC-VL10N | User Guide - Page 23
Sending Images to FTP Server at Alarm - FTP Setting Page When you click FTP in the menu section, the FTP Setting page appears. Use this page to set up for sending monitor images to an FTP (File Transfer Protocol) server. You can specify two FTP servers. FTP Server 1 Set the information of FTP server - Sony SNC-VL10N | User Guide - Page 24
FTP server(s). It is fixed to 360 × 243 for the SNC-VL10N, or 360 × 288 for the SNC-VL10P. Naming Method Set the form of naming the image file to 999, to the file name. The number is reset to 000 when you click Apply on the FTP Setting page. Manual Assigned Name Type the file name up to 36 - Sony SNC-VL10N | User Guide - Page 25
in the menu section, the Serial Setting page appears. Use this page to configure the RS485/232C serial port on the rear panel of the camera. Serial Port Selection Select the protocol for the serial port from the dropdown list. The selected protocol is automatically displayed in Port Device Name - Sony SNC-VL10N | User Guide - Page 26
port. Output 1 can output an alarm triggered by the activity detection or manually. Output Status Control Select Active to keep Output 1 of the Sensor I/O the input to the Sensor I/ O port on the rear panel of the camera. Available Alarm Events Select Enable if you want to output an alarm when the - Sony SNC-VL10N | User Guide - Page 27
duration, between 5 and 60 seconds, during which the camera can detect the next alarm input. Showing Pop-up You of the Sensor I/O port. Output 2 can output an alarm triggered by the sensor input or manually. Output Status Control Select Active to keep Output 2 of the Sensor I/O port usually open and - Sony SNC-VL10N | User Guide - Page 28
the supplied Installation Manual. Assigning the IP Address Open a DOS window and enter the IP address and the MAC address of the camera you want to assign a new IP address to, using the following commands. Arp -s Ping -t Example - Sony SNC-VL10N | User Guide - Page 29
the use of the setup program, see "Assigning the IP Address Using the Setup Program" in the supplied Installation Manual. 2 Connect the camera to the network as follows: SNC-VL10N/VL10P AC power adaptor (supplied) Power cord (supplied) to an AC outlet DC IN 12 V 10BASE-T Ethernet cable (straight - Sony SNC-VL10N | User Guide - Page 30
. For the use of the setup program, see "Assigning the IP Address Using the Setup Program" in the supplied Installation Manual. 2 Connect the camera to the network as follows: SNC-VL10N/VL10P AC power adaptor (supplied) DC IN 12 V Power cord (supplied) USB MODEM USB cable (not supplied) to an AC - Sony SNC-VL10N | User Guide - Page 31
the camera to the network as follows: SNC-VL10N/VL10P 10BASE-T Ethernet cable (not supplied) IEEE802.3af compliant power supply equipment Network 10BASE-T Others Note For details on the IEEE802.3af compliant power supply equipment connection, refer to the operation manual of the equipment. Sony
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
 |
 |
3-619-676-
13
(1)
Network Camera
© 2002 Sony Corporation
SNC-VL10N/VL10P
User’s Guide
Software Version 1.4