Sony SNCCH160 User Manual

Sony SNCCH160 Manual

Get Sony SNCCH160 PDF manuals and user guides View all Sony SNCCH160 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony SNCCH160 manual content summary:

  • Sony SNCCH160 | User Manual - Page 1
    4-199-270-12 (1) Network Camera User's Guide Software Version 1.2 Before operating the unit, please read this manual thoroughly and retain it for future reference. SNC-CH120/CH160/CH220/CH260 SNC-DH120/DH120T/DH160/DH220/DH220T/DH260 © 2010 Sony Corporation
  • Sony SNCCH160 | User Manual - Page 2
    Table of Contents Overview Features 4 How to Use This User's Guide 5 System Requirements 5 Preparation Assigning the IP Address to the Camera 6 Assigning an IP address using SNC toolbox ..... 6 When using Windows XP Service Pack 2 or later 8 When using Windows Vista 10 When using Windows 7 13
  • Sony SNCCH160 | User Manual - Page 3
    a Camera Image (SNC-CH220/CH260/DH220/DH220T/ DH260 89 Using the Custom Homepage - Setting the customized homepage 90 Using the Firmware Upgrade 90 Using the Schedule Task 91 Configuring the device setting 93 Device restart and initialization 95 Assigning the IP Address to the Camera Using
  • Sony SNCCH160 | User Manual - Page 4
    installation. (SNC-CH160/CH260/ DH120/DH120T/DH160/DH260) • Up to 5 users can view images from one camera at the same time. • Date/time can be superimposed on the image. • PoE (Power over Ethernet) compliant. NOTICE TO USERS © 2010 Sony Corporation. All rights reserved. This manual or the software
  • Sony SNCCH160 | User Manual - Page 5
    of the camera and menu display in the User's Guide show the SNC-CH120 as an example. Printing the User's Guide Depending on your system, certain displays or illustrations in the User's Guide, when printed out, may differ from those that appear on your screen. Installation Manual (printed matter
  • Sony SNCCH160 | User Manual - Page 6
    supplied Installation Manual. Consult the administrator of the network about the assigned IP address. Notes • SNC toolbox may not operate correctly if you use a personal firewall or antivirus software in your computer. In that case, disable the software or assign an IP address to the camera using
  • Sony SNCCH160 | User Manual - Page 7
    password of the administrator and click OK. The factory settings for both items are "admin". The Network Setting screen is displayed. 9 Set the IP address. To obtain the IP address automatically from a DHCP server: Select Obtain an IP address automatically. The IP address, Subnet mask and Default
  • Sony SNCCH160 | User Manual - Page 8
    not appear after step 13. In that case, try to set the IP address again. When using Windows XP Service Pack 2 or later Installing software A warning message regarding the active contents may appear when you install software such as SNC toolbox from CD-ROM. In this case, operate as follows: Example
  • Sony SNCCH160 | User Manual - Page 9
    Windows Firewall configuration as follows: Example: In case of SNC toolbox To turn Windows Firewall off 1 Select Control Panel from the Start menu of Windows. 2 Select Security Center of the working field. 3 Select Off in the Windows Firewall dialog. The camera will be displayed in the list. To turn
  • Sony SNCCH160 | User Manual - Page 10
    CD-ROM drive, click Install or run program. 5 In the Add Program dialog, select SNC toolbox and click OK. SNC toolbox is added to the Programs and Services list. 6 Click OK. is completed, the camera connected in the local network are displayed in SNC toolbox. 10 Assigning the IP Address to the
  • Sony SNCCH160 | User Manual - Page 11
    - Security Warning" appears, click Install. Program name If the message "User Account Control - An unidentified program wants access to your computer" appears, click Allow. The software installation starts. Starting the software When you start software such as SNC toolbox, the message "User Account
  • Sony SNCCH160 | User Manual - Page 12
    "User Account Control - Windows needs your permission to continue" appears, click Proceed. 4 Select Exceptions in the Windows Firewall dialog. 5 Click Add Program.... When the above procedure is completed, the cameras connected in the local network are displayed in SNC toolbox. 12 Assigning the IP
  • Sony SNCCH160 | User Manual - Page 13
    Allow. The software installation starts. Installing ActiveX Control During installation of ActiveX Control, the information bar or "Security Warning" may appear. In this case, operate as follows: If the information bar appears, click on the bar and select Install This Add-on for All Users on This
  • Sony SNCCH160 | User Manual - Page 14
    (No cameras are shown in the list even if they are detected.) In this case, confirm the Windows Firewall configuration as follows: Example: In the case of SNC toolbox 4 Select Disable Windows Firewall. 4 Select Allow another program.... The cameras will be displayed in the list. 14 Assigning the
  • Sony SNCCH160 | User Manual - Page 15
    connected in the local network are displayed in SNC toolbox. Accessing the Camera Using the Web Browser After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer. Use Internet Explorer as a Web browser
  • Sony SNCCH160 | User Manual - Page 16
    "Security Warning" may appear. For details, see "Installing ActiveX Control" in "When using Windows XP Service Pack 2 or later" on page 8, "Installing ActiveX Control" in "When using Windows Vista" on page 11 or "Installing ActiveX Control" in "When using Windows 7" on page 13. Tip The software is
  • Sony SNCCH160 | User Manual - Page 17
    • When you use antivirus software, security software, personal firewall or pop-up blocker on your computer, the camera performance may be reduced, for example, the frame rate for displaying the image may be lower. • The Web page displayed when you log in to the camera uses JavaScript. The display
  • Sony SNCCH160 | User Manual - Page 18
    camera. Select the White Balance mode according to the installation position. Select the brightness of the image sent from the camera. Select the quality of the image sent from the camera image attached to an e-mail. Set the user access right for the camera. Set a place to be watched beforehand.
  • Sony SNCCH160 | User Manual - Page 19
    control the camera. The Viewer mode setting is used to restrict the user's access rights. There are five types of users. Each type of user can use the corresponding functions below. Function Administrator Full Monitor a live image z z View the date and time z z Control the frame rate (JPEG
  • Sony SNCCH160 | User Manual - Page 20
    time When you access the network camera using ActiveX viewer for the first time, the Security Warning appears. Click Yes and install ActiveX Control. You can use all the functions of the viewer with ActiveX Control. Plug-in free viewer This viewer allows the user to select from three image display
  • Sony SNCCH160 | User Manual - Page 21
    panel Check the date and time here. View panel Operating the Camera Control panel section Monitor image section Main menu ActiveX Displays the ActiveX change the screen mode, size of the image, image codec mode and frame rate. Also, still images and movies can be saved (movie saving can also
  • Sony SNCCH160 | User Manual - Page 22
    the frame rate to transmit images. (Capture) Click to capture a still image shot by the camera and to store it in the computer. Click to open the folder to be saved. Note In the case of Windows VISTA or Windows 7, if "Enable Protected Mode" is checked in Control Panel-Internet Option-Security, still
  • Sony SNCCH160 | User Manual - Page 23
    mode, Unicast mode, and Multicast mode (page 28). The image shot by the camera is shown here. There are two modes for on-screen pan/tilt/zoom operation with a frame by dragging the mouse. In the Vector dragging mode, the camera pans or tilts in the dragged direction. How long you drag the mouse
  • Sony SNCCH160 | User Manual - Page 24
    method, image size, frame rate, PTZ operation mode, trigger selection and User menu (page 64) is set to Full, and one or more triggers are enabled in the Trigger menu (page 76).) Preset Select a preset position to move the camera to the registered preset position. (Displayed only when a camera
  • Sony SNCCH160 | User Manual - Page 25
    continues while the button remains pressed. Panning and tilting by clicking the monitor image (Area zoom mode only) Click on the monitor image, and the camera moves so that the clicked portion is positioned at the center of the display. Note When the specified area is zoomed in, the center may
  • Sony SNCCH160 | User Manual - Page 26
    memory using the Preset position menu (page 65). Using pan/tilt/zoom operations with the displayed control bar (PTZ Control bar only) Controlling the Camera on a Full Image When the camera is in controllable condition, the full image appears on the panorama panel. The full image is the still image
  • Sony SNCCH160 | User Manual - Page 27
    Operating the Camera Using the Trigger Button You can execute various functions ). Tip For the connection of peripheral devices to the alarm output of the I/O port, see the supplied Installation Manual. Controlling the Day/Night function You can set the Day/Night function to On (night mode) and Off
  • Sony SNCCH160 | User Manual - Page 28
    software or antivirus software on your computer. In that case, disable the software or select the TCP mode. • If you are using Windows XP Service than when TCP (HTTP) is selected. If a firewall is installed between the camera and the computer, or depending on the network environment, video may
  • Sony SNCCH160 | User Manual - Page 29
    Operating the Camera To use the utility, click Download to begin download. SNC viewer SNC viewer is an application which allows you to set the initial state of the viewer. Installing the SNC viewer 1 Execute the downloaded SNCViewer.msi file. 2 Install the SNC viewer following the instructions on
  • Sony SNCCH160 | User Manual - Page 30
    Tip The operation mode of Solid PTZ have been changed for this device. Save tab SNC Desktop viewer The gadget that displays the camera image on the side bar of Windows Vista or Desktop in the case of Windows 7. Installing the SNC desktop viewer 1 Click Download. When the license agreement policies
  • Sony SNCCH160 | User Manual - Page 31
    Operating the Camera How to control PTZ Select the PTZ operation mode for the Gadget screen from the options Area zoom, PTZ control bar, and Vector dragging. Click (Exit) to exit Gadget. When you click (Set), you will see the following setting screen. Tip The operation mode of Solid PTZ has been
  • Sony SNCCH160 | User Manual - Page 32
    appears. Enter the user name and password for Administrator. The user name "admin" and password "admin" are set at the factory for the Administrator. power of the camera. If the power is turned off immediately, the new setting may not be stored correctly. • If the camera settings are changed while
  • Sony SNCCH160 | User Manual - Page 33
    Menu" on page 58) User Displays the User menu for setting the log in user name and password. ("Setting the User - User Menu" on page 64) Security Displays the Security menu for specifying a computer that is allowed to connect to the camera. ("Setting the Security - Security Menu" on page 65) Preset
  • Sony SNCCH160 | User Manual - Page 34
    Camera Configuring the System - System Menu When you click System in the Administrator menu, the System menu appears. Use this menu to perform the principal settings of the software. The System menu has seven tabs: System, Date & time, Superimpose, Installation viewer page. PTZ mode Select the pan
  • Sony SNCCH160 | User Manual - Page 35
    want to synchronize the camera's date and time with the computer. Manual setting: Select if you want to set the camera's date and time manually. Select the year, Time in the area where the camera is installed. Select the time zone in the area where the camera is installed from the drop-down list. For
  • Sony SNCCH160 | User Manual - Page 36
    Camera ID: Set to display Camera ID. • Codec: Set to display the bit rate and frame rate. • Zoom ratio: Set to display the zoom ratio. • Camera direction Installation Tab You can perform settings related to installation. Display sample: SHC-CH120 Maximum image size SNC-CH120/CH160/DH120/DH120T
  • Sony SNCCH160 | User Manual - Page 37
    select this, the stored setting data of the camera, the preset position data and the data of the Privacy Masking setting are loaded. Notes • SNC-CH120/CH160/DH120/DH120T/DH160 do not support the Privacy Masking function. A function that is not installed will not be displayed. • With Restore setting
  • Sony SNCCH160 | User Manual - Page 38
    delete the homepages recorded in the flash memory of the camera with Custom Homepage of SNC toolbox (page 90). Capture full image When you click Tab The data of the software activity of the camera is recorded in this log. It includes data that is useful if a problem occurs. Click Reload to reload
  • Sony SNCCH160 | User Manual - Page 39
    . Use this menu to set the functions of the camera. The Camera menu consists of the following tabs. SNC-CH120/CH160/DH120/DH120T/DH160 do not support the Privacy Masking function. A function that is not installed will not be displayed. SNC-CH120/CH220: Common, Focus, Picture, Privacy Masking, Day
  • Sony SNCCH160 | User Manual - Page 40
    Privacy Masking and Cropping are deactivated. (SNC-CH120/CH160/DH120/DH120T/DH160 do not support the Privacy Masking function.) - The current Picture Tab You can set the color conditions, exposure, etc., of the camera. Preview screen Preview the image and adjust the picture setting. For details on
  • Sony SNCCH160 | User Manual - Page 41
    Administrating the Camera AGC Select the maximum gain value of the automatic exposure setting WB: The One push trigger button becomes active. Click the button to adjust the white balance instantly. Manual: When this option is selected, R gain and B gain become active. Selectable gain values are from
  • Sony SNCCH160 | User Manual - Page 42
    every menu" on page 32. Privacy masking tab (SNC-CH220/ CH260/DH220/DH220T/DH260) Using the privacy every privacy mask. The colors used are as follows: Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, in the position of your choice: 1 Face the camera to the position where you want to set a privacy
  • Sony SNCCH160 | User Manual - Page 43
    the Manual mode. Manual: Switch the day/night mode manually. When you select Manual, On and Off become active. When you select On, the camera works in Adjusting the Focus (SNC-CH120/CH220)" (page 39) and "Focus/Zoom tab - Adjusting the focus/zoom (SNC-CH160/CH260/DH120/DH120T/DH160/ DH220/DH220T
  • Sony SNCCH160 | User Manual - Page 44
    level6. Washed-out image control (SNC-CH160/CH260/ DH160/DH260) Setting the network load, and a higher frame rate is achieved. Select On to crop camera. The selectable size of images are depend on the setting of maximum image size. For details on selecting maximum image size, refer to "Installation
  • Sony SNCCH160 | User Manual - Page 45
    the Camera a: Possible set ×: Impossible set f: Possible set if the resolution is the same as image1 SNC-CH120/CH160/DH120/DH120T/ a a a a a a a a a a a a a a a a Image 2 a a a a a SNC-CH220/CH260/DH220/DH220T/DH260 Maximum image size [1920 × 1080] Image 1 Image 2 1920 × 1440 × × 1600 ×
  • Sony SNCCH160 | User Manual - Page 46
    frame rates are as follows: The frame rate of JPEG image can be changed by the setting of Image quality. SNC-CH120/CH160/DH120/DH120T/DH160 insertion interval. Adaptive rate control This function adjusts the frame rate and the bit rate automatically so that the camera plays back a smooth
  • Sony SNCCH160 | User Manual - Page 47
    Camera Notes • The actual frame rate and bit rate may be different depending on the image size, shooting scene, or network condition. • When Adaptive rate control is set to On, the actual frame rate and bit rate change within the range that does not exceed the values set in Frame rate and Bit rate
  • Sony SNCCH160 | User Manual - Page 48
    : Select this option when you set a fixed IP address. With this setting, specify the IP address, Subnet mask and Default gateway manually. IP address Type the IP address of the camera. Subnet mask Type the subnet mask. Default gateway Type the default gateway. DNS server Configure the DNS server
  • Sony SNCCH160 | User Manual - Page 49
    port number to a number other than 80 in the Network menu or in SNC toolbox, access the camera again by typing the IP address of the camera on your Web browser as follows: Example: Setting port number 8000 when IP address is 192.168.0.100 IPv6 setting Configure the IPv6 network settings. IPv6 can
  • Sony SNCCH160 | User Manual - Page 50
    Administrating the Camera Protocol Select the protocol. DSCP Set a value to mark the data traffic (0 ~ 63). This value is set in the DSCP field included in the IP header of the data traffic. connected to a router or switch that supports the QoS function. 50 Configuring the Network - Network Menu
  • Sony SNCCH160 | User Manual - Page 51
    Camera OK/Cancel See "Buttons common to every menu" on page 32. Dynamic IP address notification Tab - Notifying the IP Address When Obtain an IP on sale in China does not support the STARTTLS function. Authentication Select the the POP server name, User name and Password as required. SMTP: Select
  • Sony SNCCH160 | User Manual - Page 52
    Camera Note The model on sale in China does not support the CRAM-MD5 authentication. User name, Password Type the user name and password of the owner to 256 characters. The URL is normally written as follows: ip_address: Type the IP address or host name of the host to which you want to connect. To
  • Sony SNCCH160 | User Manual - Page 53
    the reset switch on the camera to initialize. For details, refer to the supplied Installation Manual. Note SSL connection will load the camera down; are supported. Note SSL is not available when Certificate options-Use an external certificate is selected, or certificate and private key password is
  • Sony SNCCH160 | User Manual - Page 54
    -signed certificate (For test use) is selected, the Security Alert dialog appears on the SSL connection with a browser. For details, refer to "Using the SSL function" (page 15). • SSL connection may be impossible due to the type of certificate installed in the camera. In this case, refer to "How to
  • Sony SNCCH160 | User Manual - Page 55
    the Camera Note Click Cancel at the bottom of the menu if you want to cancel changing the private key password after clicking Reset. Doing , the camera will immediately operate to enable client authentication. Make sure that the personal certificate on your PC is successfully installed. OK/Cancel
  • Sony SNCCH160 | User Manual - Page 56
    the CA certificate as follows. 1 Save in the PC the certificate of CA which has signed the certificate to be installed in the camera. The extension of the certificate file is normally ".cer". Double-click this file. The following Certificate dialog appears. 3 Click Next. 4 Select Automatically
  • Sony SNCCH160 | User Manual - Page 57
    . Confirm the relevant certificate, then remove it. Administrating the Camera 2 Select the certificate you want to remove. The CA cannot be removed by the steps above due to the type of certificate. Check the installation condition and remove it following the steps below. Note You need to log in as
  • Sony SNCCH160 | User Manual - Page 58
    other elements. For details on these settings, refer to the manual of the corresponding equipment. • When using the 802.1X user certificates. The CA is essential for certificate-based user authentication. Normally a CA is located inside an authentication server. Note This camera supports
  • Sony SNCCH160 | User Manual - Page 59
    the Camera Wired interface status Shows the authentication status of the 802.1X authentication function for wired ports. Click Refresh to update the status. EAP identity Type the user name to identify the client in the 802.1X authentication server using 3 to 253 characters. EAP password
  • Sony SNCCH160 | User Manual - Page 60
    no private key password is set in the camera, the text box is activated to allow entering of a password. If a private key password is already set, it is displayed as turned letters. Reset To change the private key password, click this button. The current password is cleared and the password text box
  • Sony SNCCH160 | User Manual - Page 61
    Remove Programs from Control Panel of Windows menu. Install Internet Authentication Service in Add/ Remove Windows Components. CA configuration To a security group for Active Directory 1 Open Active Directory Users and Computers from Administrative Tools of the Windows menu. 2 Select Users of the
  • Sony SNCCH160 | User Manual - Page 62
    Is Certificate Services enabled? - Does the firewall or antivirus software setting on the client PC block connection? - Are the network configuration and Internet Explorer settings on the client PC correct? 3 When Internet Explorer prompts entering the log-in user and password, type the user name as
  • Sony SNCCH160 | User Manual - Page 63
    Administrating the Camera 3 Type the log-in user name and password correctly. The "Microsoft Certificate Services" page opens. 4 Click Request a you requested was issued to you." appears. 7 Click Install this certificate. to install the certificate in the certificate store on the client PC.
  • Sony SNCCH160 | User Manual - Page 64
    the Camera Administrator Specify User name, Password and Re-type password. User 1 to 9 Specify User name, Password, Re-type password and Viewer mode for each user ID. User name Type a user name between 5 and 16 characters. Password Type a password between 5 and 16 characters. Re-type password To
  • Sony SNCCH160 | User Manual - Page 65
    between "192.168.0.0" and "192.168.0.255". Note You can access the camera even from a computer having an IP address whose access right is set to Deny, if you enter the user name and password set for the Administrator boxes in the User menu. OK/Cancel See "Buttons common to every menu" on page 32
  • Sony SNCCH160 | User Manual - Page 66
    to save the current pan, tilt and zoom positions as the home position. To move the camera to the home position, click in the control panel (page 22). Reset Click to reset the home position to the factory-set position. Position at alarm This unit can synchronize a preset position with Sensor input or
  • Sony SNCCH160 | User Manual - Page 67
    restart or stop the tour after it has stopped by manual pan, tilt or zoom operation or by camera movement to the preset position triggered by an alarm. On obtained with Fastest. Stay time Type a period of time during which the camera is to stay at each preset position, between 1 and 3600 seconds.
  • Sony SNCCH160 | User Manual - Page 68
    - Setting the e-Mail (SMTP) Function Administrating the Camera 68 Sending an Image via E-mail - e-Mail ( use the e-Mail (SMTP) function. Note The frame rate and operability on the main viewer may be reduced while name using up to 64 characters, or the IP address of the SMTP server. SMTP port number
  • Sony SNCCH160 | User Manual - Page 69
    64 characters, or type the IP address of the POP server. This setting is not support the CRAMMD5 authentication. User name, Password Type the user name and password of the user is added for sensor input detection, (TP) for camera interference detection, (MD) is additionally available for motion
  • Sony SNCCH160 | User Manual - Page 70
    SNC-CH120/ CH160/CH220/CH260/DH120T/ DH160/DH220T/DH260) Set to send an e-mail linked with alarm detection by the external sensor input or by the built-in detection functions. Note When more than two of the following settings are activated, the camera Click Clear to reset the Sequence number suffix
  • Sony SNCCH160 | User Manual - Page 71
    . Note When more than two of the following settings are activated, the camera only creates two still images at the same time. A third still image are added to the image file name. Sequence number clear Click Clear to reset the Sequence number suffix to 1. Interval Type the interval at which you
  • Sony SNCCH160 | User Manual - Page 72
    Note The frame rate and operability on IP address of the FTP server. User name Type the user name for the FTP server using up to 64 characters. Password Type the password for the FTP server using up to 64 characters. Re-type password To confirm the password are activated, the camera only creates two
  • Sony SNCCH160 | User Manual - Page 73
    files created with consecutive alarm events. Sequence number clear Click Clear to reset the Sequence number suffix to 1. Alarm Select the alarm to be . Note When more than two of the following settings are activated, the camera only creates two still images at the same time. A third still image
  • Sony SNCCH160 | User Manual - Page 74
    file name. Sequence number clear Click Clear to reset the Sequence number suffix to 1. Mode Select mode: An image file is sent each time the camera is moved to a preset position during the tour. Interval image size, image quality setting, bit rate and the network environments. Effective period Set
  • Sony SNCCH160 | User Manual - Page 75
    on the rear of the camera linked to alarm detection, the timer and the Day/Night function. The Alarm output menu consists of one tab: Alarm out 1. Tip For details on connection of peripheral devices to the alarm output of the I/O port, refer to the supplied Installation Manual. Alarm out 1 Tab Alarm
  • Sony SNCCH160 | User Manual - Page 76
    set the necessary options here. The setting options and setting procedures are the same as those of the FTP client menu (page 72). Administrating the Camera e-Mail (SMTP) Checking this box allows you to select e-Mail (SMTP) on the Trigger panel in the main viewer. By clicking e-Mail (SMTP) a still
  • Sony SNCCH160 | User Manual - Page 77
    procedures are the same as those in the Day/Night tab of the Camera menu (page 43). Note The day/night function is invalid when Day When setting e-Mail (SMTP) (Periodical sending) in the Schedule menu Administrating the Camera Use the same time schedule every day When this item is checked, the same
  • Sony SNCCH160 | User Manual - Page 78
    time When you click Motion detection, "Security Warning" is displayed. When you click Yes, ActiveX control is installed and the Motion detection menu is displayed. 78 Setting the Sensor input/Camera tampering detection/Motion detection (SNC-CH120/CH160/CH220/CH260/DH120T/DH160/DH220T/DH260) - Event
  • Sony SNCCH160 | User Manual - Page 79
    manually. For the setting of the Proxy server, consult your network administrator. • When you install ActiveX control, you should be logged in to the computer as Administrator. • When you are using Windows XP Service Pack 2 or later, Windows Vista or Windows 7, the information bar or "Security
  • Sony SNCCH160 | User Manual - Page 80
    response velocity of motion detection. A value from 1 to 5 can be specified. Clicking Return to the default changes the value to the default value. 80 Setting the Sensor input/Camera tampering detection/Motion detection (SNC-CH120/CH160/CH220/CH260/DH120T/DH160/DH220T/DH260) - Event detection Menu
  • Sony SNCCH160 | User Manual - Page 81
    HTML file in the built-in flash memory, use the Custom Homepage function of SNC toolbox included in the supplied CD-ROM. To learn how to use the Custom URL in the address box of your Web browser. Example: When the IP address of the camera is set to 192.168.0.100 Enter the following value to
  • Sony SNCCH160 | User Manual - Page 82
    zoom: Area zoom is available when streaming starts. PTZ control bar: Display the PTZ operation bar when streaming starts. Vector dragging: Vector drag is available when streaming starts. Initial frame rate Set the initial camera image frame rate. Initial image Set what to initially display on the
  • Sony SNCCH160 | User Manual - Page 83
    SNC ActiveX of the camera image area rate, if it is checked. Preset position: Displays the setting menu of Preset position, if it is checked. Trigger: Displays the setting options of Trigger, if it is checked. PTZ operation: Displays the setting menu of PTZ settings. Default: Resets the setting
  • Sony SNCCH160 | User Manual - Page 84
    SNC toolbox. To install SNC toolbox, to assign an IP address and to set the network, see "Assigning the IP Address to the Camera" on page 6 in "Preparation". Notes • SNC toolbox may not operate correctly if you use a personal firewall or antivirus software screen for user names and passwords related
  • Sony SNCCH160 | User Manual - Page 85
    Firmware Upgrade: Displays the Firmware Upgrade screen. Initialize Device: Reboot: Restarts the device. Factory Default: Initializes the device to factory default SNC toolbox log. Option: Displays the screen for modifying SNC registered manually are IP address of the device. Port No. You can
  • Sony SNCCH160 | User Manual - Page 86
    number. Version No. Displays the version of firmware. Admin name Displays the administrator user name. Tips • A camera with which SSL communication has been performed will show on the left side of its IP address. • The model on sale in China does not support the SSL function. View button You can
  • Sony SNCCH160 | User Manual - Page 87
    the display returns to the main screen. Updating thumbnail images To display the thumbnail, select the camera of the thumbnail you wish to update and click Reload to display the current camera image as the thumbnail. Others Details display with thumbnails Select Snapshot(S) from the View menu or
  • Sony SNCCH160 | User Manual - Page 88
    Language Set language. Default device account Set the initial values of user name and password for the administrator accessing the device for each device. Show warning dialog when closing main window: Select to display the warning message. Remind me the risk when assigning IP: Select to display
  • Sony SNCCH160 | User Manual - Page 89
    Camera Image (SNC-CH220/CH260/DH220/ DH220T/DH260) The Privacy Masking function of SNC toolbox allows you to mask parts of the camera image to be transmitted. 1 Select the camera mask. The selectable colors are as follows: Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, White, Red, Green, Blue,
  • Sony SNCCH160 | User Manual - Page 90
    uploading. Uploading of the homepage file to the camera starts. 5 Click Cancel to exit the program. Using the Firmware Upgrade Using the Firmware Upgrade function of the SNC toolbox allows you to upgrade the firmware of the device. Starting the Firmware Upgrade 1 Select the device to upgrade its
  • Sony SNCCH160 | User Manual - Page 91
    the time or interval to change the Device setting or perform Firmware upgrade. Click Task to display the Task List, which shows to upgrade in Paralleled upgrade quantity. 4 To back up the camera setting, check Backup device setting. 5 Click Start upgrading. Upgrading Add. 91 Using the SNC toolbox
  • Sony SNCCH160 | User Manual - Page 92
    or Firmware Upgrade. Others 2 Click Next. 3 Select a device to which the task is assigned. A list of devices registered in My device is displayed. Select the device you want to assign the task to from the My device list, and register in Device(s) in task list. My Device: Display a list of cameras
  • Sony SNCCH160 | User Manual - Page 93
    screen. The main screen of SNC Toolbox is displayed. Cancel Close the Device Setting screen without Camera" System "Configuring the System - System Menu" on page 34 System "System Tab" on page 34 Date "Date & time Tab" on page 35 Superimpose "Superimpose Tab" on page 35 Installation "Installation
  • Sony SNCCH160 | User Manual - Page 94
    IP address notification SSL Setting CA certificate 802.1X Common Client certificate CA certificate User Security Preset position Tour (position) Pages to refer to in "Administrating the Camera" "Setting the Camera Image - Camera output Menu (SNC-CH120/CH160/ CH220/CH260/DH120T/ DH160/DH220T/DH260
  • Sony SNCCH160 | User Manual - Page 95
    on the menu bar to initialize the device (restore factory default). Assigning the IP Address to the Camera Using ARP Commands This section explains how to assign an IP address to the camera using ARP (Address Resolution Protocol) commands without using the SNC toolbox. Note When you turn on the
  • Sony SNCCH160 | User Manual - Page 96
    using the inqjs=snmp (JavaScript parameter) format. var sysDescr="SNC-CH120" (or "SNC-CH160" , "SNC-CH220" , "SNC-CH260" , "SNC-DH120" , "SNC-DH120T" , "SNC-DH160" , "SNC-DH220" , "SNC-DH220T" , "SNC-DH260") ...1 var sysObjectID="1.3.6.1.4.1.122.8501" ...2 var sysLocation="" ...3 var
  • Sony SNCCH160 | User Manual - Page 97
    This field is used to describe the administration node of this camera. Nothing is set at the factory. 6 Describes the case of "mib-2.snmpEnable AuthenTraps.0". This traps to the host having the IP address "192.168.0.101". 2. Setting Commands The unit supports the following SNMP setting commands. <
  • Sony SNCCH160 | User Manual - Page 98
    the EAP methods using Transport Layer Security. By using digital certificates and other methods, EAP-TLS prevents data falsification, eavesdropping and spoofing. Frame rate The number of frames of a moving image that can be transmitted per a second. FTP client Software to be used for accessing the
  • Sony SNCCH160 | User Manual - Page 99
    an IP address. Network bandwidth Bit rate that DNS servers. Proxy server A server or software that acts as an intermediary between a local Service Code Point) field included in the IP header to control communication service quality. RADIUS client RADIUS (Remote Authentication Dial-in User Service
  • Sony SNCCH160 | User Manual - Page 100
    distinguish the subnet address from an IP address. TCP Acronym for Transmission Control security since it changes encryption keys based on PSK during on-going communication. UDP Acronym for User wireless LAN. It provides higher security than the conventional WEP (Wired Equivalent Privacy) standard. In
  • Sony SNCCH160 | User Manual - Page 101
    F Factory default 37 factory settings 37 File attachment 70 file name 70, 71, 73, 74 Firmware Upgrade 90 format of date and time 35 Frame rate 22, Initialize 37 Installation Tab 36 Internet Authentication Service ..... 61 Internet Explorer 15 Interval 71, 74 IP address 6, 48 IP Setup
  • Sony SNCCH160 | User Manual - Page 102
    , 69 Remote path 73 Reset 66 Restore setting 37 Resume time on inactivity 67 Re-type password 64, 72 S saves the setting data 37 Schedule 33, 77 Schedule Menu 77 Schedule Task 91 Secondary DNS server 48 Security 33, 65 Security function 65 Security Menu 65 Security Warning 8, 9, 11, 78
  • Sony SNCCH160 | User Manual - Page 103
    Others V Video codec 44 Video port number 47 View size 21 Viewer authentication 64 Viewer Menu 81 Viewer mode 19, 64 W welcome page 15 Windows Firewall 9 Windows Vista 10 Windows XP Service Pack 2 8 WPA 100 WPA2 100 Z Zoom 22, 25, 34 Sony Corporation Index 103
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
Network Camera
User’s Guide
Software Version 1.2
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNC-CH120/CH160/CH220/CH260
SNC-DH120/DH120T/DH160/DH220/DH220T/DH260
4-199-270-
12
(1)
© 2010 Sony Corporation