Sony SNCHM662 User Manual (SNC-HM662 user guide)
Sony SNCHM662 Manual
 |
View all Sony SNCHM662 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SNCHM662 manual content summary:
- Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 1
A-ET5-100-11 (1) Network Camera User's Guide Before operating the unit, please read this manual thoroughly and retain it for future reference. SNC-HM662 Software Version 1.0 or later © 2013 Sony Corporation - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 2
Table of Contents Overview Features 3 How to Use This User's Guide 4 System Requirements 4 Accessing the Camera Using the Web Browser 5 Basic Configuration by the Administrator ......... 7 Operating the Camera Administrator and User 8 Logging in to System 9 Logging - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 3
to 10 users can view images from one camera at the same time. • PoE (Power over Ethernet) compliant. NOTICE TO USERS © 2013 Sony Corporation. All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 4
Depending on your system, certain displays or illustrations in the User's Guide, when printed out, may differ from those that appear on your screen. Installation Manual (printed matter) The supplied Installation Manual describes the names and functions of parts and controls of the Network Camera - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 5
image may not be displayed. In that case, disable Automatic configuration and set the proxy server manually. For setting the proxy server, consult your network administrator. • When you install ActiveX Control, you should be logged in to the computer as Administrator. Tip The software is optimized - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 6
Overview To display the viewer correctly To operate the viewer correctly, set the security level of Internet Explorer to Medium or lower, as follows: 1 Select Tools from the menu bar for Internet Explorer, then select Internet Options and click the Security tab. 2 Click the Internet icon (when - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 7
camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend image sent from the camera. Select the White balance mode according to the installation position. Select the brightness of the image sent from the camera. Select - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 8
Operating the Camera Operating the Camera This section explains how to monitor the image from the camera using your web browser. The functions of the camera should be set by the Administrator. For the setting of the camera, see "Administering the Camera" on page 15. Administrator and User This - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 9
Operating the Camera Logging in to System Logging in as a user 1 Start the Web browser on your computer and type the IP address of the camera you want to monitor. 2 Enter the user ID and password. The authentication dialog appears. When you enter the user name and password in the dialog, the viewer - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 10
displayed from 1O mode. 1P (Single Panoramic view) mode: In 1P mode, the hemispheric image is displayed as a 360° panoramic screen. When the camera is installed on a wall, the image is displayed as a 180° screen. You can move the screen horizontally and smoothly by using the mouse. The zoom in or - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 11
Operating the Camera 1R View Zoom In Zoom Out Zoom in/out & all-directional navigation control 2P (Dual Panoramic View) mode: In 2P mode, the hemispheric image is displayed as the 360° panoramic screen which is converted the same as 1P mode. Two screens, above and below, are displayed separately, - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 12
Player. Select AAC for recording when you want to play the video on QuickTime Player. • The recorded file cannot be played on Windows Media Player. Install required codec to play the video on Windows Media Player. Volume Use the +/- buttons to adjust the PC's audio output volume which is input from - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 13
5 is the fastest. Tuor speed Sets the pause time for each pre-set position. Tuor speed 1 2 3 4 5 Staying time (second) 6 3 2 1.5 1.2 Other panel Manual triggers When the manual trigger is set to the event trigger in the Event settings, you can enable the trigger by selecting the checkbox. Alarm - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 14
By selecting it, the network transmission load of the camera can be reduced. If a router that does not correspond to a multicast or firewall is installed between the camera and the computer, video/audio may not play back properly. In this case, select TCP or Unicast. HTTP: This is normally selected - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 15
options The setting menus of this unit will only enable options that you can currently select. Grayed out options cannot be selected. Only supported functions are displayed. Basic Operations of the Administrator Menu You can use the Administrator menu to set all functions to suit the user's needs - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 16
for the area where the camera is installed. Select the time zone for the area where the camera is installed from the drop-down list. Enable camera's date and time with the computer. Manual setting: Select if you want to set the camera's date and time manually. Select the year, month, date, hour - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 17
information of the camera software function. Records useful information when a problem occurs. Click Reload to load the latest information. - Access a few seconds) on the camera. For details, refer to the supplied Installation Manual. Note When the unit is re-started or reset to the factory settings - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 18
color (approx. 2800 K to 10000 K) which is hard to be influenced by the illumination. Fix current value: Select On, the current white balance is fixed. Manual: Select this to set RGain and BGain. The gain value can be in the range 0% to 100%. Picture Brightness Set the brightness. Select high values - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 19
Exposure Tab Adjust the exposure settings. Measurement Window Full view Measures the light intensity of the full range of view. Custom You can manually specify areas to be measured (Measurement Window) and areas not to be measured (exclusive area). You can specify 10 photometric areas and exclusive - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 20
Administering the Camera Delete privacy masking To delete privacy masks, click on the right side of the window name, then click OK. Video codec Use this tab to set the items for the video codec. - FOV Tab Select Display mode for the image. Fisheye mode Select if you want to display the image in the - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 21
you select Obtain an IP address automatically (DHCP), make sure that a DHCP server is operating on the network. To specify the fixed IP address manually Select Use fixed IP address. Type the address in the IP address, Subnet mask, Default gateway, Primary DNS server and Secondary DNS server. 21 - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 22
the webpage in the following address format: (See HTTP streaming for detailed information.) IPv6 address Secondary HTTP port To specify the fixed IPv6 address manually Select Use fixed IP address. Type the address in the IP address / Prefix length, Default gateway and Primary DNS server. IP address - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 23
Administering the Camera Audio Port Type the port number (from 1025 to 65535) for the audio port. OK/Cancel See "Buttons common to every menu" on page 15. Streaming protocols HTTP streaming Notes • Specify different numbers for the video port number and the audio port number. • Software Version - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 24
RTSP streaming Multicast image 1-3 (RTSP) Click the items to configure the settings for multicast image 1-3. Administering the Camera Access name for image 1-3 Type access names for image 1-3. RTSP port number Set the port number used for RTSP streaming. Memo The port specified here is used when - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 25
Administering the Camera Enable QoS/DSCP Select the checkbox to configure the QoS/DSCP. Set values (0-63) to mark the data traffic. OK/Cancel See "Buttons common to every menu" on page 15. SNMP SNMP configuration Encryption password Enter a password for encryption (at least 8 characters). Read - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 26
Setting the Security - Security Menu When you click Security in the Administrator menu, the submenus of the Security menu expand. The Security menu consists of User, SSL, Access restriction, and IEEE 802.1X. User Set the user names and passwords of Administrator and up to 9 users (User 1 to User 9), - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 27
certificate is stored in the camera. You do not need to install an external certificate. However, you cannot execute the existence proof, reasons of security, we recommend using this mode only when there is no problem even if perfect security is not saved. Note When Create self-signed certificate - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 28
server and other elements. For details on these settings, refer to the manual of the corresponding equipment. • When using the IEEE 802.1X authentication a CA is located inside an authentication server. Note This camera supports EAP mode, in which the supplicant and the server authenticate using the - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 29
should be within 50 characters. CA certificate You can upload a trusted CA certificate (server certificate or route certificate). Only the PEM format is supported. To upload the CA certificate Click Browse... to select the CA certificate to be imported. Click the Upload button, and the selected file - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 30
Administering the Camera Setting the PTZ control - PTZ Menu Preset and tour settings To configure preset positions When you click PTZ in the Administrator menu, the submenus of the PTZ menu expand. The PTZ menu consists of PTZ settings. You can make settings for the camera's pan/tilt/zoom - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 31
To configure preset tour OK/Cancel See "Buttons common to every menu" on page 15. Administering the Camera 2 1 1 3 1 Select one of the preset tour positions listed in User preset locations, then click the move button (>>). The list is displayed in the Sequence of the tour. Memo Sequence of the - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 32
Setting the Event - Event Menu When you click Event in the Administrator menu, the submenus of the Event menu expand. The Event menu consists of Event settings. Event settings The Event settings which are set are displayed. Click Add to set up a new Event. You can set up to 3 events. To set the - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 33
function. For details, see "Camera tampering detection" on page 36. Manual triggers Performs the event according to the checkboxes of the manual triggers 1, 2, 3 for the viewer screen is set. Set the checkbox for corresponding manual trigger number. 3. Action Set the action to be performed when the - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 34
Administering the Camera You can set up to 5 file formats. Still Image Select whether the still image file is to be saved in Edge storage, or sent via email. Setting name Input the name of the file format setting. Image Select the image for making the still image from Image 1 to Image 3. Send [ ] - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 35
Administering the Camera Other settings - Application Menu When you click Applications in the Administrator menu, the submenus of the Applications menu appear. The application menu consists of Motion detection, Sensor input, and Camera tampering detection. Motion detection Motion detection - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 36
Camera tampering detection Enable To detect tampering, such as spraying, select the checkbox. OK/Cancel See the "Buttons common to every menu" (page 15). Settings on the Recording - Recording Menu When you click Recording in the Administrator menu, the submenus of the recording menu expand. The - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 37
for which the recording settings are enabled. Network fail Select when a problem occurs in the network and the recording setting is enabled. 2. Destination recorded video or audio data. For details on supported applications, contact an authorized Sony dealer. SD memory card Initializing the SD - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 38
SD Memory Card Control Enable cyclic storage When the micro SD card does not have the enough free space, select whether the data should be overwritten or not. When you check this, the setting allows to overwrite, and then the recorded data from the oldest one will be overwritten. If you do not - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 39
Others Others Glossary ActiveX control A component program object that can be used with web pages or other application programs. The technology for creating ActiveX control is part of software developed by Microsoft. Bit rate The rate at which data bits are transmitted. Capture To send audio and - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 40
Others Proxy server A server or software that acts as an intermediary between a local network and the Internet so that it can connect to the Internet in place of a computer on a local network. Saturation The degree to which a color is pure. Secondary DNS server Subsidiary DNS server used when a - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 41
4, 6 IP address 39 I-picture interval 20 IPv4 setting 21 IPv6 setting 22 J JPEG 39 L Language 9 Log 17 Logging in 9 M Main menu 9 Manual triggers 13 Measurement Window 19 Mic volume 12 Motion detection 35 Multicast 14, 39 Multicast image 1-3 (RTSP 24 Multicast streaming 23 N Network - Sony SNCHM662 | User Manual (SNC-HM662 user guide) - Page 42
10 View size 12 Viewer 9 Viewer mode 26 Viewer Screen 9 Volume 12 W White balance 18 Wide dynamic range 18 Z Zoom control 13 Zoom speed 13 Sony Corporation 42 Index
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
 |
 |
Network Camera
User’s Guide
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNC-HM662
Software Version 1.0 or later
A-ET5-100-
11
(1)
© 2013 Sony Corporation