Sony SNT-EX101E User Guide

Sony SNT-EX101E Manual

Get Sony SNT-EX101E PDF manuals and user guides View all Sony SNT-EX101E manuals
Add to My Manuals
Save this manual to your list of manuals

Sony SNT-EX101E manual content summary:

  • Sony SNT-EX101E | User Guide - Page 1
    4-154-542-11 (1) Video Network Station User's Guide Software Version 1.0 Before operating the unit, please read this manual thoroughly and retain it for future reference. SNT-EX101 SNT-EX104/SNT-EP104 SNT-EX154/SNT-EP154 SNT-RS1U/SNT-RS3U © 2009 Sony Corporation
  • Sony SNT-EX101E | User Guide - Page 2
    Table of Contents Overview Features 4 How to Use This User's Guide 5 System Requirements 5 Preparation Assigning the IP Address to the unit 6 Assigning an IP address using SNC toolbox ..... 6 When using Windows XP Service Pack 2 or later 8 When using Windows Vista 10 Accessing the System Using
  • Sony SNT-EX101E | User Guide - Page 3
    Sending an Image via E-mail - e-Mail (SMTP) Menu 57 Common Tab - Setting the e-Mail (SMTP) Function 57 Alarm sending Tab - Setting the e-mail sending mode when detecting the alarm 58 Periodical sending Tab - Setting the periodical e-mail sending mode 59 Sending Images to FTP Server - FTP client
  • Sony SNT-EX101E | User Guide - Page 4
    alarm function is provided on the SNT-EX101, SNT-EX104 and SNT-EX154. • Up to 10 users can view images from one camera at the same time. • Date/time can be superimposed on the image. NOTICE TO USERS © 2009 Sony Corporation. All rights reserved. This manual or the software described herein, in
  • Sony SNT-EX101E | User Guide - Page 5
    the SNC-RH124, SNC-RH164 or SNT-EX104 video network station as an example. Printing the User's Guide Depending on your system, certain displays or illustrations in the User's Guide, when printed out, may differ from those that appear on your screen. Installation Manual (printed matter) The supplied
  • Sony SNT-EX101E | User Guide - Page 6
    connect the unit, referring to "Connection" in the supplied Installation Manual. Consult the administrator of the network about the assigned IP address using ARP Commands" on page 102. • If you are using Windows XP Service Pack 2 or later, or Windows Vista, disable the Windows Firewall function.
  • Sony SNT-EX101E | User Guide - Page 7
    . Note When you select Obtain an IP address automatically, make sure that the DHCP server is operating on the network. To specify the IP address manually: Select Use the following IP address, and type the IP address, Subnet mask and Default gateway in the relevant boxes. 10 Set the DNS server
  • Sony SNT-EX101E | User Guide - Page 8
    not set correctly, the viewer does not appear after step 13. In that case, try to set the IP address again. When using Windows XP Service Pack 2 or later Installing software A warning message regarding the active contents may appear when you install software such as SNC toolbox from CD-ROM. In
  • Sony SNT-EX101E | User Guide - Page 9
    Preparation If the information bar appears, click on the bar and select Install ActiveX Control.... 3 Select Windows Firewall and select Off in the Windows Firewall dialog. If " Internet Explorer - Security Warning" appears, click Install. Program name The installation of ActiveX Control starts.
  • Sony SNT-EX101E | User Guide - Page 10
    Preparation 6 In the Add Program dialog, select SNC toolbox and click OK. SNC toolbox is added to the Programs and Services list. 7 Click OK. If the pop-up "AutoPlay" appears when a CD-ROM is inserted into the CD-ROM drive, click Install or run program. Program
  • Sony SNT-EX101E | User Guide - Page 11
    Preparation Note If you select Save in the "File Download - Security Warning" dialog, you will not be able to perform installation correctly. Delete the downloaded file, and click the Setup icon again. If the message "Internet Explorer - Security Warning" appears, click Run. If the message "User
  • Sony SNT-EX101E | User Guide - Page 12
    4 Select Off in the "General" tab. 8 Click OK. Preparation The video network station will be displayed in the list. If you want to keep Windows Firewall On, continue with the following steps. 5 Select the "Exceptions" tab. 6 Click Add a Program.... 7 If the Add a Program dialog appears, select
  • Sony SNT-EX101E | User Guide - Page 13
    the following in the address box of the browser. For HTTP connection Using the SSL function Note The model on sale in China does not support the SSL function. When Internet Explorer 6 is used "Security Alert" dialog may appear according to the status of the certificate. In this case, click Yes
  • Sony SNT-EX101E | User Guide - Page 14
    In that case, disable Automatic configuration and set the Proxy server manually. For the setting of the Proxy server, consult your network appear. For details, see "Installing ActiveX Control" in "When using Windows XP Service Pack 2 or later" on page 8 or "Installing ActiveX Control" in "When
  • Sony SNT-EX101E | User Guide - Page 15
    Preparation Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this video network station. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you
  • Sony SNT-EX101E | User Guide - Page 16
    the pan/tilt/zoom operation * z z Receive audio * z z Select the codec mode z z Control the setting menu z - z Usable function - Not usable function * SNT-EX101/SNT-EX104/SNT-EX154 only The access rights of the administrator and the user can be set in "Setting the User - User Menu" of
  • Sony SNT-EX101E | User Guide - Page 17
    (LAN) Settings of Internet Explorer, the camera image may not be displayed. In that case, disable Automatic configuration and set the Proxy server manually. For the setting of the Proxy server, consult your network administrator. • When you install ActiveX Control, you should be logged in to the
  • Sony SNT-EX101E | User Guide - Page 18
    Configuration of Main Viewer This section explains the functions of the parts and controls of the main viewer. For a detailed explanation on each part or control, see the specified pages. Main viewer using ActiveX Viewer Main menu Control panel section Information panel Check the date and time here
  • Sony SNT-EX101E | User Guide - Page 19
    to the optimum position. Note To control the focus manually, set Focus mode of the Camera menu to Manual (page 34). (Exclusive control) Click this button control mode is on. Notes • This operation is not available on the SNT-EP104 or SNT-EP154. • To operate the camera, it is necessary to have a
  • Sony SNT-EX101E | User Guide - Page 20
    to the preset position that you have stored in memory using the Preset position menu. Notes • This operation is not available on the SNT-EP104 or SNT-EP154. • To operate the camera, it is necessary to have a camera connected, and the connection/setting set correctly. Others panel The image shot
  • Sony SNT-EX101E | User Guide - Page 21
    control pan/tilt, zoom and focus. Notes • This operation is not available on the SNT-EP104 or SNT-EP154. • To operate, make sure the connected camera is configured correctly. Controlling via is set to the optimum position. Note To control the focus manually, set Focus mode of the Camera menu to
  • Sony SNT-EX101E | User Guide - Page 22
    Operating the unit Moving the camera to a preset position Select a preset position name from the Preset position panel. The camera will move to the preset position that you have stored in memory using the Preset position menu (page 54). Multiple preset positions can be organized by group according
  • Sony SNT-EX101E | User Guide - Page 23
    Manual. • The number of alarm outputs varies by model. The number of selectable alarm output terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT details, see "Configuring Windows Firewall" in "When using Windows XP Service Pack 2 or later" on page 9, or "Configuring Windows
  • Sony SNT-EX101E | User Guide - Page 24
    Operating the unit UDP (Multicast): This protocol is selectable when Multicast streaming (page 37) is On. When UDP (Multicast) is selected as the transmission port, RTP (Real-time Transport Protocol) and UDP multicast techniques are adopted for video/audio transmission. By selecting it, the network
  • Sony SNT-EX101E | User Guide - Page 25
    You can set the connection method. Select the start-up connection from: TCP, UDP Unicast, and UDP Multicast. If TCP connection is selected, you can configure proxy settings by selecting Use proxy. View tab Audio tab Operating the unit Screen mode You can select Window or Full. View size You can
  • Sony SNT-EX101E | User Guide - Page 26
    Joystick tab Operating the unit You can assign the joystick buttons here. SNC Desktop Viewer This is a gadget that displays the camera image in the side bar of Windows Vista. Camera address Set the IP address for the camera to display on the Gadget. Frame rate Select the frame rate for the image
  • Sony SNT-EX101E | User Guide - Page 27
    Administrating the unit Administrating the unit This section explains how to set the functions of the unit by the Administrator. For details about monitoring the camera image, see "Operating the unit" on page 16. This section explains the basic operations and each option of the Administrator menu.
  • Sony SNT-EX101E | User Guide - Page 28
    Administrating the unit Configuration of the Administrator menu System Displays the System menu. For details, see "Configuring the System - System Menu" (page 29). Camera Displays the Camera menu for setting the camera image and audio. For details, see "Setting the Camera Image and Audio - Camera
  • Sony SNT-EX101E | User Guide - Page 29
    mode Controls the authority to operate pan, tilt, zoom and some other functions of the camera. Notes This operation is not available on the SNT-EP104 or SNT-EP154. On: Only one user has control authority. Set the operation time for one user in Operation time. If a user tries to operate a function
  • Sony SNT-EX101E | User Guide - Page 30
    Tamper level. Note The camera tempering detection is not available on the SNT-EP104 and SNT-EP154. OK/Cancel See "Buttons common to every menu" on page 's date and time with the computer. Manual setting: Select if you want to set the unit's date and time manually. Select the year, month, date, hour
  • Sony SNT-EX101E | User Guide - Page 31
    Administrating the unit Use the following NTP server address: Synchronize with the selected NTP server address. NTP server 1: Enter the first choice for NTP server address. NTP server 2: Enter the second choice for NTP server address. NTP server 3: Enter the third choice for NTP server address.
  • Sony SNT-EX101E | User Guide - Page 32
    the supplied Installation Manual. Backup setting data Saves the setting data of the unit in a file. Click Save, and follow the instructions on the Web browser to specify the folder and save the setting data of the unit. The file name preset at the factory is "snt-ex104.cfg" for SNT-EX104. Restore
  • Sony SNT-EX101E | User Guide - Page 33
    set in the Preset Setting menu. Note This operation is not available on the SNT-EP104 or SNT-EP154. Delete header logo Click Delete to delete the header logo set in the Viewer data that is useful if a problem occurs. Click Reload to reload the latest data. 33 Configuring the System - System Menu
  • Sony SNT-EX101E | User Guide - Page 34
    not have Common Tab. • Voice alert configuration is only available for CH1 on the SNT-EX154. Focus mode Select the focus mode. Auto: The focus is automatically adjusted. Manual: The focus can be adjusted by using the , and buttons of the control panel displayed in the main viewer. Microphone
  • Sony SNT-EX101E | User Guide - Page 35
    Picture Tab You can set the color condition, brightness, etc., of the camera. Display sample: OK/Cancel See "Buttons common to every menu" on page 27. Privacy Masking tab Using the privacy masking enables you to hide images by masking specified parts of the images when streaming. Note Performing
  • Sony SNT-EX101E | User Guide - Page 36
    Administrating the unit Color Specify the color of privacy masks. This setting is common to every privacy mask. The colors used are as follows: Black, White, Gray, Red, Green, Blue, Cyan, Yellow, Magenta. Setting a privacy mask Operate according to the following procedure to set a privacy mask in
  • Sony SNT-EX101E | User Guide - Page 37
    Administrating the unit Notes • The actual frame rate and bit rate may be different depending on the image size, shooting scene, or network condition. • When Adaptive rate control is set to On, the maximum transmission rate will be the values set in Frame rate and Bit rate. Image quality Set the
  • Sony SNT-EX101E | User Guide - Page 38
    a fixed address as the IP address of the DNS server. With this setting, specify the addresses on Primary DNS server and Secondary DNS server manually. Note When you select Obtain DNS server address automatically, make sure that a DHCP server is operating on the network. Primary DNS server Type the
  • Sony SNT-EX101E | User Guide - Page 39
    Note The domain suffix is sent to the DHCP server as FQDN (Fully Qualified Domain Name) information when Host name is set. HTTP port number Normally select 80. If you want to use a port number other than 80, select the text box and type a port number between 1024 and 65535. Note When you have set
  • Sony SNT-EX101E | User Guide - Page 40
    Administrating the unit Set Used when registering on the QoS table. QoS is set according to the following procedure: 1 Select No. from NO. and enter the necessary conditions for Network address, Subnet, Protocol and/or Port No.. 2 Enter values in the Protocol and DSCP fields. 3 Click Set and
  • Sony SNT-EX101E | User Guide - Page 41
    Administrating the unit Authentication Select the authentication required when you send an email. Off: Select if no authentication is required when an email is sent. On: Select if authentication is required when an e-mail is sent. Select one of the authentication methods from the following and
  • Sony SNT-EX101E | User Guide - Page 42
    "SSL" hereafter) The settings allows the unit to communicate with the client PC by using SSL. Note The model on sale in China does not support the SSL function. SSL tab SSL function On: Select this to use the SSL function. When Allow HTTP connection for some clients is selected, both
  • Sony SNT-EX101E | User Guide - Page 43
    For details, refer to the supplied Installation Manual. Note SSL connection places additional burden on a CA. The PKCS#12 and PEM formats are supported. Note Even if the SSL function is set to we recommend using this mode only when there is no problem even if perfect security is not saved. Notes •
  • Sony SNT-EX101E | User Guide - Page 44
    CA certificate (route certificate, etc.) to the unit. Up to four certificates from trusted CAs can be imported to the camera. Only PEM format is supported. To import the CA certificate 1 Click Browse... to select the CA certificate to be saved in the unit. 2 Click Submit The selected file will be
  • Sony SNT-EX101E | User Guide - Page 45
    OK/Cancel See "Buttons common to every menu" on page 27 How to install the CA certificate The unit may not be connected because the browser (Internet Explorer) does not display whether the certificate will be accepted or not due to the type of certificate. In this case, install the CA certificate as
  • Sony SNT-EX101E | User Guide - Page 46
    To remove an installed CA certificate 1 In Internet Explorer, click in the order Tools, Internet options, Content tab and Certificates. The Certificates dialog appears. 4 Select Certificates from the list, then click Add. Certificate Snap-in is displayed. 5 Select Computer account as the
  • Sony SNT-EX101E | User Guide - Page 47
    and other elements. For details on these settings, refer to the manual of the corresponding equipment. System configuration of 802.1X network The Normally a CA is located inside an authentication server. Note This camera supports EAP mode in which the supplicant and the server authenticate using the
  • Sony SNT-EX101E | User Guide - Page 48
    . This will cancel other changes made to the settings. EAP method You can select the authentication method used with the authentication server. This device supports TLS and PEAP. TLS: By this method, the supplicant and the server authenticate each other using a certificate. This enables secure port
  • Sony SNT-EX101E | User Guide - Page 49
    certificate or route certificate) to the unit. Up to four certificates from trusted CAs can be imported to the unit. Only the PEM format is supported. To import the CA certificate Click Browse... to select the CA certificate to be imported. Then click Submit, and the selected file will be imported
  • Sony SNT-EX101E | User Guide - Page 50
    CA, perform the following steps: 1 Open Add or Remove Programs from Control Panel of the Windows menu. 2 Select Add/Remove Windows Components. 3 Add Certificate Services in the Component menu. 4 Select Enterprise root CA on CA Type. 5 Type the CA name on Common Name for this CA, and configure the CA
  • Sony SNT-EX101E | User Guide - Page 51
    page does not appear using the URL above, check the following: - Is the service of Web site enabled on Internet Information Service (IIS)? - Is Certificate Services enabled? - Does the firewall or antivirus software setting on the client PC block connection? - Are the network configuration and
  • Sony SNT-EX101E | User Guide - Page 52
    bar. The CA's URL is normally as follows: 2 Click Go To. 3 Type the log-in user name and password correctly. The "Microsoft Certificate Services" page opens. 4 Click Request a certificate, advanced certificate request and Create and submit a request to this CA in sequence. 5 Set the following items
  • Sony SNT-EX101E | User Guide - Page 53
    whether the user is authenticated or not when the main viewer is displayed. Note Pan/Tilt and Preset position are not available on the SNT-EP104 and SNT-EP154. On: The main viewer is displayed in accordance with the viewer mode of the authenticated user. Off: Select the viewer mode of the
  • Sony SNT-EX101E | User Guide - Page 54
    Saving pan/tilt/ zoom position You can set camera positions (pan, tilt and zoom positions). Note These settings are not available on the SNT-EP104 or SNT-EP154. Position at alarm The unit can synchronize a preset position with sensor input with the motion detection function. If an alarm is detected
  • Sony SNT-EX101E | User Guide - Page 55
    Administrating the unit Tip The number of selectable sensor input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None Sensor input 1 (S1) Select a preset position to synchronize with the alarm from Sensor input 1. Sensor input 2 (S2) Select a preset position to
  • Sony SNT-EX101E | User Guide - Page 56
    active when Tour is set to On. With this item, you can select whether you restart or stop the tour after it has stopped by manual pan, tilt or zoom operation or by camera movement to the preset position triggered by an alarm. On: Specify the wait time before the tour
  • Sony SNT-EX101E | User Guide - Page 57
    file can also be sent periodically. The e-Mail (SMTP) menu consists of three tabs: Common, Alarm sending and Periodical sending. Note The SNT-EP104 and SNT-EP154 do not have a function to send image files from external automatic sensor inputs. Common Tab - Setting the e-Mail (SMTP) Function e-Mail
  • Sony SNT-EX101E | User Guide - Page 58
    Select the alarm to be linked with e-mail notification. Tip The number of selectable input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None * * Alarm sending is available only for the simple motion detection function. Sensor input 1: The external sensor that
  • Sony SNT-EX101E | User Guide - Page 59
    Tampering: An alarm that is triggered when the camera detects vibration or shaking. VMF: An alarm of the VMF detection function. Motion detection: The alarm detected by the motion detection function. Click Detection, and the motion detection menu is displayed to allow you to set the motion detection
  • Sony SNT-EX101E | User Guide - Page 60
    Administrating the unit Date & time: The date & time suffix is added to the image file name. The date & time suffix consists of the year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minutes (2 digits) and seconds (2 digits), and sequential number (2 digits), thus adding a 14-
  • Sony SNT-EX101E | User Guide - Page 61
    linked with the file to be forwarded to the FTP server. Tip The number of selectable input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None * * Alarm sending is available only for the simple motion detection function. Sensor input 1: The external sensor that is
  • Sony SNT-EX101E | User Guide - Page 62
    sent each time the camera is moved to a preset position during the tour. Note Periodical mode and Tour mode are not available on the SNT-EP104 and SNT-EP154. Interval Type the interval at which you want to send images to the FTP server periodically. You can set the hour (H), minutes (M) and
  • Sony SNT-EX101E | User Guide - Page 63
    displayed in the memory space box and you cannot access the built-in memory. • The USB memory option is not available on the SNT-EP104, SNT-EX154 and SNT-EP154. Overwrite Select On to overwrite the file when there is insufficient memory space to record the image in the built-in memory or
  • Sony SNT-EX101E | User Guide - Page 64
    Administrating the unit Note When Overwrite is set to On, a warning mail is not sent to the Administrator. SMTP server name Type the name of the SMTP server for sending an email, using up to 64 characters. Otherwise type the IP address of the SMTP mail server. SMTP port number Select the textbox
  • Sony SNT-EX101E | User Guide - Page 65
    to be linked with the recording of image and audio files. Tip Number of selectable input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None * * Alarm sending is available only for the simple motion detection function. Sensor input 1: The external sensor that is
  • Sony SNT-EX101E | User Guide - Page 66
    is recorded when the camera is moved to each preset position during the tour. Note Periodical mode and Tour mode are not available for SNT-EP104 and SNT-EP154. Interval Type the interval at which you want to record an image in the memory periodically. You can set the hour (H), minutes (M) and
  • Sony SNT-EX101E | User Guide - Page 67
    of peripheral devices to the alarm output of the I/O port, refer to the supplied Installation Manual. • The number of selectable input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None * * Alarm sending is available only for the simple motion detection function
  • Sony SNT-EX101E | User Guide - Page 68
    Administrating the unit Timer: Controls alarm output using the timer. Click Schedule and the menu for the effective period is displayed. ("Setting the Schedule - Schedule Menu" on page 72) Sensor input 1 Select this option when you link the alarm output to an external sensor that is connected to
  • Sony SNT-EX101E | User Guide - Page 69
    the alarm to be linked with the voice alert function. Tip The number of selectable input terminals is as follows: SNT-EX101: 2 SNT-EX104/SNT-EX154: 4 SNT-EP104/SNT-EP154: None * * Alarm sending is available only for the simple motion detection function. Sensor input 1: The external sensor that is
  • Sony SNT-EX101E | User Guide - Page 70
    Effective period Set the period during which alarm detection is effective. Always: Alarm detection is always effective. Schedule: You can specify the period during which alarm detection is effective. Click Schedule, and the menu for the effective period is displayed. ("Setting the Schedule -
  • Sony SNT-EX101E | User Guide - Page 71
    control the alarm output by clicking Alarm output 1, Alarm output 2, Alarm output 3 or Alarm output 4. Note This operation is not available on the SNT-EP104 or SNT-EP154. Select the alarm ouput control mode from Toggle or Timer. Toggle: Each time you run a trigger, On (short circuit) or Off (open
  • Sony SNT-EX101E | User Guide - Page 72
    : Schedule in the Voice alert 1, 2 or 3 tab of the Voice alert menu Note Preset position and Voice alert are not available for SNT-EP104 and SNT-EP154. Example: When setting e-Mail (SMTP) (Periodical sending) in the Schedule menu Administrating the unit 72 Setting the Schedule - Schedule Menu Use
  • Sony SNT-EX101E | User Guide - Page 73
    the VMF function can independently set off an alarm at the time of detection. Note The simple motion detection function is available for SNT-EP104 and SNT-EP154. See "The simple motion detection function" on page 79. What are VMF functions-Video Motion Filter VMF functions are for inspecting whether
  • Sony SNT-EX101E | User Guide - Page 74
    . In that case, disable Automatic configuration and set the Proxy server manually. For the setting of the Proxy server, consult your network administrator. . For details, see "Installing ActiveX Control" in "When using Windows XP Service Pack 2 or later" on page 8 or "Installing ActiveX Control" in
  • Sony SNT-EX101E | User Guide - Page 75
    Administrating the unit Target of setting Select the camera position subject to detection settings and VMF settings from Current position or Preset. If you select Items to configure, the Current Position and Preset will be displayed. Selecting Preset will display Restore preset. Current position:
  • Sony SNT-EX101E | User Guide - Page 76
    Administrating the unit Adding a vertex Clicking Adding a vertex will change the cursor to a button. In that state, when you click on a part of the side of the area, a vertex is added to that point. After the addition, the cursor will return to move mode. It is the same function as the button
  • Sony SNT-EX101E | User Guide - Page 77
    Setting number Select the setting number to set from 1, 2 or 3. The following VMF setting is saved for the individual setting number selected here. The set of the setting numbers selected here is valid for current VMF setting. Note package1, package2 and package3 of the VMF setting cannot be
  • Sony SNT-EX101E | User Guide - Page 78
    Presence Disappear Administrating the unit Similar to a active window an inspection area can also be moved and vertexes can be moved/added or deleted. If an object is present within the window longer than the specified time, the presence is acknowledged. Presence time Specify the time of presence
  • Sony SNT-EX101E | User Guide - Page 79
    detection function The following three simple functions are provided for motion detection. The simple motion detection function is available on the SNT-EP104 and SNT-EP154. Detection level Set the sensitivity of the motion detection. Set a scale from [1] to [100]. Detection size Specify the size of
  • Sony SNT-EX101E | User Guide - Page 80
    and output them to the computer via a network. Notes • For the SNT-EX104 and SNT-EX154, set the four video channels to the same setting, except for the Select RS-485 or RS-422. Note RS-422 is only available on the SNT-EX101. Camera ID Set the connected Camera ID when Interface is selected to Serial.
  • Sony SNT-EX101E | User Guide - Page 81
    Administrating the unit Configuring the Viewer - Viewer Menu Click Viewer in the Administrator menu to display the Viewer menu. Using this menu, you can select the viewer to use and configure advanced settings. Layout tab Custom Select the homepage to be displayed. You can display your favorite
  • Sony SNT-EX101E | User Guide - Page 82
    when SNC ActiveX viewer is selected for Streaming method from Setting of the control bar. • The initial PTZ operation is not available on the SNT-EP104 and SNT-EP154. Show menu Set whether to have a frame or not in the camera image area. Set whether to show or hide operation buttons at
  • Sony SNT-EX101E | User Guide - Page 83
    Administrating the unit HTML output tab If the monitor is for personal use, this tab can be used to output sample source for HTML and script. For details on the setting, refer to "Setting the monitor" of the Layout tab. Monitor Displays a preview. Embedded script Displays the sample source for
  • Sony SNT-EX101E | User Guide - Page 84
    using ARP Commands" on page 102. • If you are using Windows XP Service Pack 2 or later, or Windows Vista, disable the Windows Firewall function. the Device list. Add Folder: Creates a folder. Add Device Entry: Manually registers a device. Modify Device Entry: Edits the device information. Remove:
  • Sony SNT-EX101E | User Guide - Page 85
    , it will also be registered in this folder. My device folder When this folder is selected, devices in the Search result folder or registered manually are displayed in the Device list. Device list Devices registered in the folder selected at Device tree view are displayed in a list. Device name
  • Sony SNT-EX101E | User Guide - Page 86
    Others Software version Displays the version of firmware. Admin name Displays the administrator user name. View button You can change the display format of the Device list (page 87) . Registering in My device The device tree has three folders by default: Search result, Error and My device. The
  • Sony SNT-EX101E | User Guide - Page 87
    Deleting a device/folder Select the device/folder to be deleted from the Device list or Device tree and right click the mouse. Select Delete from the displayed menu (or select Delete from the Edit menu). Moving a device/folder You can move a device/folder by following either of the methods below: •
  • Sony SNT-EX101E | User Guide - Page 88
    Setting SNC toolbox options Select Option from the Tools menu to display the "Option" dialog. This dialog consists of three tabs: General, Network and Log. General tab Language Set language. Default device account Set the initial values of user name and password for the administrator accessing the
  • Sony SNT-EX101E | User Guide - Page 89
    Others Using Privacy Masking - Masking a Camera Image The Privacy Masking function of SNC toolbox allows you to mask parts of the camera image to be transmitted. 1 Select the camera to set a privacy mask from the Device list. 2 Click Masking. Using the Privacy Masking The Privacy Masking screen
  • Sony SNT-EX101E | User Guide - Page 90
    Setting a privacy mask To set a privacy mask in a desired position, do the following: 1 Move the camera to the position you want to set a privacy mask using the control panel. 2 Click the point where you want to set the privacy mask on the viewer. The clicked point moves to the center of the image.
  • Sony SNT-EX101E | User Guide - Page 91
    Using the Firmware Upgrade Using the Firmware Upgrade function of the supplied SNC toolbox allows you to upgrade the firmware of the device. Starting the Firmware Upgrade 1 Select the device to upgrade its firmware from the Device list. You can select multiple devices at the same time. 2 Right click
  • Sony SNT-EX101E | User Guide - Page 92
    Cancel Closes the Task List. Creating a task 1 Click Add. Displays Task Wizard. 5 Select the task action. Select Device Setting or Firmware Upgrade. Others 2 Click Next. 3 Select a device to which the task is assigned. A list of devices registered in My device is displayed. Select the device you
  • Sony SNT-EX101E | User Guide - Page 93
    Others Recurrence pattern Specify the operation interval. Onetime: Runs the task once. Hourly: Specify the operation frequency in units of hours. (Possible set value: 1 to 99) Daily: Specify the operation frequency in units of days. (Possible set value: 1 to 99) Weekly: Specify the operation
  • Sony SNT-EX101E | User Guide - Page 94
    Others Setting items Preset position Tour e-Mail (SMTP) Common Alarm sending Periodical sending FTP client Common Alarm sending Periodical sending Image memory Common Alarm sending Periodical sending FTP server setting Pages to refer to in "Administrating the system" "Saving the Camera Position
  • Sony SNT-EX101E | User Guide - Page 95
    on the SNT-EP104 or SNT-EP154. • Voice alert configuration is only available for CH1 on the SNT-EX154. The SNC audio upload tool supports the tool. The "File Download" dialog opens. When you are using Windows XP Service Pack 2 or later, or Windows Vista, a message regarding the active contents
  • Sony SNT-EX101E | User Guide - Page 96
    Camera list) When the SNC audio upload tool starts, it automatically detects Sony video network stations connected to the local network and displays them in the multiple video network stations. Notes • If you are using Windows XP Service Pack 2 or later, or Windows Vista, disable the Windows Firewall
  • Sony SNT-EX101E | User Guide - Page 97
    network stations. The factory setting for both items is "admin." Add Use this item when you add a new video network station to the camera list manually. Click this button to open the following dialog. Type the IP address and port number of the camera to be added and click OK. (start
  • Sony SNT-EX101E | User Guide - Page 98
    During SSL communication, appears on the left side of the IP address of the video network station. The model on sale in China does not support the SSL function. Model: Displays the model name of the video network station. Serial: Displays the serial number of the video network station. Status
  • Sony SNT-EX101E | User Guide - Page 99
    During SSL communication, appears on the left side of the IP address of the video network station. The model on sale in China does not support the SSL function. Model: Displays the model name of the video network station. Serial: Displays the serial number of the video network station. Progress
  • Sony SNT-EX101E | User Guide - Page 100
    using Windows Vista" on page 10. 2 Click the Setup icon of SNC video player. The "File Download" dialog opens. When you are using Windows XP Service Pack 2 or later, or Windows Vista, a message regarding the active contents may appear. For details, see "Installing software" in "When using Windows XP
  • Sony SNT-EX101E | User Guide - Page 101
    Others Using the SNC video player 1 Start the SNC video player. 2 Click the (browse) icon. The Select File dialog opens. 3 Select the file you want to play. Click on the top of the screen to open the file information dialog. File dialog Model name: Model name of the video network station with
  • Sony SNT-EX101E | User Guide - Page 102
    ? If the indicator goes off, the network connection has a problem. Connect the network correctly. - Did you enter the IP as SNMP manager software. This unit also supports the coldStart trap which occurs when the power SNT-EX101", "SNT-EX104", "SNT-EP104", "SNT-EX154", "SNT-EP154", "SNT-RS1U", "SNT
  • Sony SNT-EX101E | User Guide - Page 103
    community name "public," and enables sending of traps to the host having the IP address "192.168.0.101". 2. Setting Commands The unit supports the following SNMP setting commands. GET, POST First, perform the settings of the following parameters. 1) sysLocation= Set the
  • Sony SNT-EX101E | User Guide - Page 104
    Others Glossary ActiveX control A component program object that can be used with web pages or other application programs. The technology for creating ActiveX control is part of software developed by Microsoft. AES Abbreviation for Advanced Encryption Standard. This is the next-generation standard
  • Sony SNT-EX101E | User Guide - Page 105
    is an authentication and accounting protocol managing network access, and a RADIUS client is a party that accesses the network. In Internet connecting service, a Network Access Server (NAS) such as that for dial-up and broadband access server is a RADIUS client. In a wireless LAN system, a wireless
  • Sony SNT-EX101E | User Guide - Page 106
    Others SNMP A protocol for monitoring and managing network devices. SSL Acronym for Secure Sockets Layer. This is a protocol developed by Netscape Communications Corporation to be used for communications of encrypted data on the Internet. Subnet mask 32-bit stream used to distinguish the subnet
  • Sony SNT-EX101E | User Guide - Page 107
    Others Index A Access log 33 Active Directory 50 ActiveX control 8, 11, 13 ActiveX Viewer 17, 18 Adaptive rate control 36 adaptive rate control 36 Adjust 30 Administrator 16, 53 administrator 16 Administrator e-mail address 41, 58, 64 Administrator menu 27 AES 104 Alarm 58, 61, 65, 69
  • Sony SNT-EX101E | User Guide - Page 108
    Image memory Menu 63 Image quality 37 image quality 37 Image size 36 information bar 9 Information Bar message 8 Initialize 32 Internet Authentication Service......50 Internet Explorer 13 Interval 60, 62, 66 IP address 6, 38 IP Setup Program 6, 84 IPv4 setting 38 IPv6 setting 39 J JPEG
  • Sony SNT-EX101E | User Guide - Page 109
    Voice alert Menu 69 voice alert number select 99 volume 19, 34 W warning mail 63 welcome page 13 Windows Firewall 9 Windows Vista 10 Windows XP Service Pack 2 8 Z zoom 19, 21 Numerics 802.1X 47, 106 Index 109
  • Sony SNT-EX101E | User Guide - Page 110
    Sony Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Video Network Station
User’s Guide
Software Version 1.0
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNT-EX101
SNT-EX104/SNT-EP104
SNT-EX154/SNT-EP154
SNT-RS1U/SNT-RS3U
4-154-542-
11
(1)
© 2009 Sony Corporation