Sony SPP-A985 Operating Instructions

Sony SPP-A985 - Cordless Telephone With Answering System Manual

Get Sony SPP-A985 - Cordless Telephone With Answering System PDF manuals and user guides View all Sony SPP-A985 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony SPP-A985 manual content summary:

  • Sony SPP-A985 | Operating Instructions - Page 1
    3-223-813-11 (1) Cordless Telephone with Answering System Operating Instructions US SPP-A985 ©2000 Sony Corporation
  • Sony SPP-A985 | Operating Instructions - Page 2
    Owner's Record The model and the serial numbers are located at the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. SPP-A985 Serial No 2US
  • Sony SPP-A985 | Operating Instructions - Page 3
    IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on
  • Sony SPP-A985 | Operating Instructions - Page 4
    to maintain uninterrupted service. 7. If trouble is experienced with this equipment (SPP-A985), for repair or warranty information, please contact Sony Direct Response Center: Tel 1-800-222-7669. If the equipment is causing harm to the telephone network, the telephone company may request
  • Sony SPP-A985 | Operating Instructions - Page 5
    manual could void your authority to operate this equipment. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
  • Sony SPP-A985 | Operating Instructions - Page 6
    10 Step 2: Setting up the base phone 13 Step 3: Preparing the battery pack 16 Step 4: Entering the area code 20 Identifying the parts Basics 24 Making calls 28 Redialing 29 Receiving calls Telephone Features 32 Speed dialing 32 Storing phone numbers and names 34 Making calls with
  • Sony SPP-A985 | Operating Instructions - Page 7
    the number of digits of the phone number 68 Using "Caller ID with call waiting" service Additional Information 69 Mounting the base phone on a wall 70 Carrying the handset by the belt clip 71 Notes on power sources 71 Maintenance 72 Troubleshooting 77 Specifications 78 Index Back cover LIMITED
  • Sony SPP-A985 | Operating Instructions - Page 8
    including finding the best location for the base phone. Base phone Handset Step 3 (pages 13 to 14) Then, insert the battery pack into the handset and charge it for more than 12 hours. Step 4 (pages 16 to 19) Finally, enter the area code to use the Caller ID service. That's it! 8US Getting Started
  • Sony SPP-A985 | Operating Instructions - Page 9
    the following items in the package. If anything is missing, contact your local Sony dealer. Getting Started AC power adaptor (AC-T131) Base phone Handset Telephone line cords (2) Wall bracket for base phone Rechargeable battery pack (BP-T23) Belt clip Directories (2) Getting Started 9US
  • Sony SPP-A985 | Operating Instructions - Page 10
    best location Where you place the base phone affects the reception quality of the handset. Away from noise sources such as a move base phone away from other noise sources. • The cordless telephone operates at a frequency that may cause interference to nearby TVs and VCRs; the base phone should
  • Sony SPP-A985 | Operating Instructions - Page 11
    to hang the base phone on the wall, see page 69. 3 Hook the cord. To an AC outlet To DC IN 9V 2 AC power adaptor (supplied AC-T131) To the telephone outlet 1 Telephone line cord (supplied) To LINE 1 Connect the telephone line cord to the LINE jack and to a telephone outlet. 2 Connect the AC
  • Sony SPP-A985 | Operating Instructions - Page 12
    adaptor to a continuous power supply. • Place the base phone close to the AC outlet so that you can unplug the AC power adaptor easily. + - Polarity of the plug Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Modular Choose the dialing mode
  • Sony SPP-A985 | Operating Instructions - Page 13
    place it with either side facing up. The CHARGE lamp lights up when the handset is properly seated on the charge terminals of the base phone. Charge the battery pack for more than 12 hours so that the battery is fully charged. The CHARGE lamp remains lit even after charging is completed. continued
  • Sony SPP-A985 | Operating Instructions - Page 14
    capacity. To obtain the best performance from the battery Do not place the handset on the base phone after each call. The battery works best if the handset is returned to the base phone after two or three calls. However, do not leave the handset off the base phone for a long period of time as this
  • Sony SPP-A985 | Operating Instructions - Page 15
    Getting Started Handset spare battery usage As only one battery pack is supplied with this unit, it is necessary to purchase an additional battery pack (optional) for use as a handset spare battery pack. 1 Open the battery compartment lid of the base phone. BP-T23 2 Insert the battery pack (with
  • Sony SPP-A985 | Operating Instructions - Page 16
    by 10-digit dialing (area code + number), you can register up to 5 local area codes with this telephone to take advantage of this system. See "To enter the local area code (For 10 digits phone number users)" on page 18. Case 2. If 10-digit dialing (area code + number) is required for all local
  • Sony SPP-A985 | Operating Instructions - Page 17
    area code, perform steps 1 to 4. The home area code appears on the display for about 20 seconds. To change the home area code 1 Perform steps 1 to 4 on page 16. The current home area code appears on the display. 2 Turn Jog Dial down to erase the current home area code. 3 Enter a
  • Sony SPP-A985 | Operating Instructions - Page 18
    local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 turning Jog Dial. 5 Press Jog Dial. "ENTER AREA CODE" appears on the display. 6 Enter three digits of the local area code using the dialing keys.
  • Sony SPP-A985 | Operating Instructions - Page 19
    area code, perform steps 1 to 5. The local area code appears on the display for about 20 seconds. To change the local area code 1 Perform steps 1 to 5 on page 18. The current local area code appears on the display. 2 Turn Jog Dial down to erase the current local area code. 3 Enter a
  • Sony SPP-A985 | Operating Instructions - Page 20
    Identifying the parts Refer to the pages indicated in parentheses for details. Base Phone 1 qf 2 3 qg 4 qh 5 qj 6 qk handset is in use. qs SPARE BATT lamp (p. 15) Lights while the spare battery is being charged. qd CHARGE lamp (p. 13) Lights while the battery is being charged. qf Display
  • Sony SPP-A985 | Operating Instructions - Page 21
    speaker volume or press to move the cursor on the display. wa DIAL MODE switch (p. 12) Selects pulse or waiting" service, or lets you make a new call. wh INTERCOM button (p. 42) Lets you talk between the base phone and handset. wj telephone line) jack (p. 11, 69) continued Getting Started 21US
  • Sony SPP-A985 | Operating Instructions - Page 22
    handset. 6 HOLD button (p. 25) Puts a call on hold. 7 Battery compartment (p. 13) 8 TONE button (p. 25) Allows you to switch temporarily to tone dialing. 9 PGM (Program) button (p. 16, 35) Used to store numbers in Phone Directory. q; Display window (p. 24, 60) qa CALL WAITING/FLASH button (p. 25
  • Sony SPP-A985 | Operating Instructions - Page 23
    Getting Started ql w; qg # button (p. 66) Used to change the number of digits of the phone number in the Caller ID list. qh PAUSE button (p. 36) Inserts a pause in the dialing sequence. qj MUTING button (p. 25) Mutes your voice during a conversation.
  • Sony SPP-A985 | Operating Instructions - Page 24
    VOL switch (REDIAL) You will then hear a dial tone. "HANDSET IN USE" appears on the display of the base phone and the LINE lamp on the base phone lights up. If "CHANNEL SEARCHING" appears on the display, move closer to the base phone. 3 Dial the phone number. 4 When you're done talking, press (OFF
  • Sony SPP-A985 | Operating Instructions - Page 25
    dialing until disconnected. * You need to subscribe to the service from your telephone company. Notes • When you increase the sound volume, in display, move closer to the base phone; otherwise, the call will be disconnected after one minute. If the battery becomes weak during a call The handset
  • Sony SPP-A985 | Operating Instructions - Page 26
    ) on the handset. The call is on hold and "HOLD" appears on the display. 2 Replace the battery pack. 3 Press (HOLD) or (TALK) to resume the conversation. Making calls through the speakerphone Press (SPEAKERPHONE) on the base phone. "SPEAKERPHONE" appears on the display and the display also shows
  • Sony SPP-A985 | Operating Instructions - Page 27
    • While conversing with an outside caller via the handset, the display on the base phone shows "HANDSET IN USE". If you press (SPEAKERPHONE) at this time, you can talk to the handset and to the line connected. • When the talk time exceeds 9:59'59, the display counts from 0:00'00 again. To obtain the
  • Sony SPP-A985 | Operating Instructions - Page 28
    last number dialed either on the handset or on the base phone. To check the phone number before redialing When not making a call with either the handset or base phone, press (REDIAL). If you're at the base phone, press (REDIAL/PAUSE). The last number dialed is displayed for five seconds. To dial the
  • Sony SPP-A985 | Operating Instructions - Page 29
    placed I (HEADSET) jack VOL switch on the base phone. "TALK" appears on the display and the display also shows the talk time in hours, minutes and seconds. "HANDSET IN USE" appears on the display of the base phone and the LINE lamp on the base phone lights up. 2 When you're done talking, press
  • Sony SPP-A985 | Operating Instructions - Page 30
    " on the handset page 40. * You need to subscribe to the service from your telephone company. Note If another call comes in by "call waiting" service while conversing with an outside caller, you will hear two short beeps. Tip To inform you of an incoming call, the display shows "** RINGING
  • Sony SPP-A985 | Operating Instructions - Page 31
    need to subscribe to the service from your telephone company. Note Even when you set the RINGER LEVEL switch on the base phone to OFF, the handset will ring when the ringer of the handset is turned on (see page 40). Tips • To inform you of an incoming call, the display shows "** RINGING **" and the
  • Sony SPP-A985 | Operating Instructions - Page 32
    Telephone Features Speed dialing You can dial with a touch of a few keys by storing a phone number on a dialing key. Storing phone numbers and names (VOL) Example: to store "SONY" "123-4567". 1 Press (PGM). "PROGRAM" appears on the display. 2 Press (SPEED DIAL). "ENTER 0 TO 9" appears on the
  • Sony SPP-A985 | Operating Instructions - Page 33
    number of 17 digits or more has been entered, the phone number appears in two lines. 7 Press (PGM). You will hear a long confirmation beep, and the name and the number are stored. The display goes off. SONY 1234567 1234567890123456 12 Note Do not allow more than 20 seconds to elapse between each
  • Sony SPP-A985 | Operating Instructions - Page 34
    phone number before speed dialing When not making a call with the base phone, press (SPEED DIAL) and then one of the dialing keys ((0) to (9)). The number stored on the key appears on the display for five seconds. To dial the number, press (SPEAKERPHONE) while the number is displayed. 34US Telephone
  • Sony SPP-A985 | Operating Instructions - Page 35
    dial a number by scrolling through the Phone Directory, in which up to 50 phone numbers can be stored. Storing phone numbers and names Example: to store "SONY" "123-4567". Turn Press 1 Press (PGM). (Be sure not to press (TALK).) DIRECTORY AREA RINGER Telephone Features If "DIRECTORY" is not
  • Sony SPP-A985 | Operating Instructions - Page 36
    digits or more has been entered, the phone number appears in two lines. SONY 1234567 1234567890123456 12 6 Press (PGM). You will hear a long confirmation beep, and the name and the number are stored. The display goes off. Notes • If you intend to save a 51st phone number, you will hear five short
  • Sony SPP-A985 | Operating Instructions - Page 37
    Telephone Features Changing a stored name and/or phone number 1 Display the name and phone number you want to change by doing steps 1 and 2 in "Making calls from the Phone Directory" on page 38. SONY 1234567 2 Press Jog Dial. DIAL EDIT ERASE 1234567 3 Turn Jog Dial up to make "EDIT" flash and
  • Sony SPP-A985 | Operating Instructions - Page 38
    2 Display the name and phone number you want to call. To search in alphabetical order: Turn Jog Dial up or down. To search by entering the initial character: Press the dialing key of the desired character, then turn Jog Dial. SONY 1234567 3 Press Jog Dial. DIAL EDIT ERASE 1234567 38US Telephone
  • Sony SPP-A985 | Operating Instructions - Page 39
    names appear in the following order when you turn Jog Dial up or down. • Alphabetical order: ABC...XYZ y symbols y * y # y 0 - 9 • Initial character: To search for "SONY" for example, press (7) and then turn Jog Dial to search through the names starting with P, Q, R, S or 7. Telephone Features 39US
  • Sony SPP-A985 | Operating Instructions - Page 40
    When "RINGER" is set to "RINGER OFF" The handset won't ring. You can still make calls, and also receive calls if another telephone connected to the same line rings to inform you on incoming calls. To turn the ringer on again Follow the instructions described in "Setting the ringer type". 40US
  • Sony SPP-A985 | Operating Instructions - Page 41
    flashes. 2 Press (TALK) or (HOLD) on the handset. You can continue talking to the caller through the handset. Telephone Features To switch from the handset to the base phone (TALK) 1 Press (HOLD) on the handset. The call is on hold and "HOLD" appears on the display and the LINE lamp on the base
  • Sony SPP-A985 | Operating Instructions - Page 42
    base phone. The base phone and handset ring and "** PAGING **" appears on the display. When a person at the handset presses (INTERCOM), you can talk with each other. "INTERCOM" appears on the display. When you are done talking or if no one answers the phone Press (INTERCOM) again. 42US Telephone
  • Sony SPP-A985 | Operating Instructions - Page 43
    a busy tone. Tips • You can receive an intercom call on the handset even when "RINGER" is set to "RINGER OFF". • You can receive an intercom call on the base phone even when the RINGER LEVEL switch on the base phone is set to OFF. The base phone will ring at a low level. Telephone Features 43US
  • Sony SPP-A985 | Operating Instructions - Page 44
    hold on the base phone and the handset rings. "** PAGING **" appears on the display of both the base phone and handset. 2 Press (INTERCOM) on the handset. "INTERCOM" appears on the display of both the handset and base phone. You can talk between the base phone and the handset. 3 Press (TALK) on the
  • Sony SPP-A985 | Operating Instructions - Page 45
    base phone. "SPEAKERPHONE" appears on the display of the base phone. If no one answers the phone Press (TALK) on the handset. Tip You can receive an intercom call on the base phone even when the RINGER LEVEL switch on the base phone is set to OFF. The base phone will ring at a low level. Telephone
  • Sony SPP-A985 | Operating Instructions - Page 46
    the week 1 Press (MENU) repeatedly until you hear "Set day and time". "- -" blinks on the display. 2 Press (SELECT) repeatedly to select the day of the week. 3 Press (TIME/SET). The day , or when you connect the base phone to the AC outlet for the first time. 46US Answering Machine Features
  • Sony SPP-A985 | Operating Instructions - Page 47
    Press (MENU) repeatedly until "Set out-going message" is announced. "- -" blinks on the display. 2 Press (REC/MEMO). "Now recording" is announced and a long beep sounds. MIC see page 55), then follow the instructions above. Otherwise, the normal greeting will be recorded. continued
  • Sony SPP-A985 | Operating Instructions - Page 48
    out-going message" is announced. Then press (PLAY/STOP) to play back the greeting. To change the greeting Record a new greeting by following the instructions on the previous page. The new greeting replaces the old one. To erase the greeting 1 Press (MENU) repeatedly until "Set out-going message" is
  • Sony SPP-A985 | Operating Instructions - Page 49
    rings You can select the number of times the phone rings before it answers to take a message. There are four modes: 2, 4, 6, and Toll Saver. 1 Press (MENU) repeatedly until you hear "Set number of rings". "- -" blinks on the display. 2 Press (SELECT) repeatedly to select a ring duration (2, 4, 6, or
  • Sony SPP-A985 | Operating Instructions - Page 50
    have received any new incoming messages. (TIME/SET) (PLAY/STOP) 1 Press (MENU) repeatedly until you hear "Set audible message alert". "- -" blinks on the display. (VOL) 2 Press (SELECT) to set the audible message alert on or off. 3 Press (TIME/SET). The setting is announced. 4 Press (PLAY/STOP
  • Sony SPP-A985 | Operating Instructions - Page 51
    or business. When a caller calls The caller can choose one of the two ways to leave a message: • If calling from a touch-tone phone, the caller select a mailbox by pressing (*)(1) (MAILBOX 1), (*)(2) (MAILBOX 2) or (*)(3) (MAILBOX 3) while the caller hears the greeting. The greeting stops and a beep
  • Sony SPP-A985 | Operating Instructions - Page 52
    and memo). When the remaining recording time becomes less than 30 seconds, "F" flashes on the display and the answering machine goes into the memory full status. In this status, the answering machine You can also erase the messages from an outside phone (see page 59). 52US Answering Machine Features
  • Sony SPP-A985 | Operating Instructions - Page 53
    Playing back messages If there are new messages, the display flashes the number of new messages. You will hear beeps if the audible message alert setting is on (see page 50). (REPEAT/SLOW) Press a mailbox
  • Sony SPP-A985 | Operating Instructions - Page 54
    you will hear three short beeps. • You cannot adjust the speaker volume while the phone is ringing. Tip There are 8 steps for the volume level (1 to 8). The to erase. 54US Note The display shows the total number of "new" (i.e. unreviewed) messages. Therefore, the display is reset to "0" when you
  • Sony SPP-A985 | Operating Instructions - Page 55
    only mode on or off. (PLAY/STOP) 3 Press (TIME/SET). The setting is announced. 4 Press (PLAY/STOP) to exit the menu setup mode. The display shows "A" when the answering machine is set to the announcement only mode. Notes • To activate announcement only mode, you have to turn on the answering
  • Sony SPP-A985 | Operating Instructions - Page 56
    is picked up. If the answering machine does not stop, press either (PLAY/STOP) on the base phone, or (*)(0) on the handset or parallel phone. The recording will remain as a new message. Turning on/off the screening calls function The screening calls function is preset to on at the factory. (
  • Sony SPP-A985 | Operating Instructions - Page 57
    Recording a memo message You can leave messages for other users of the unit. 1 Press (REC/MEMO). MIC (microphone) 2 Press a ). • If your message is shorter than two seconds, the recording will be canceled. • The display flashes "99" if you record a memo for more than 99 seconds. • If a call
  • Sony SPP-A985 | Operating Instructions - Page 58
    Setting the remote ID code (security code) To operate the answering machine from a touch-tone phone while you are away from home, you need to set the remote ID code (security code). 1 Press (MENU) repeatedly until you hear "Set security code". 2
  • Sony SPP-A985 | Operating Instructions - Page 59
    Picking up new messages 1 Call your telephone number from a touch-tone phone. 2 When you hear the greeting, press (#) and and the control code. • If you did not turn on the answering machine, your phone answers automatically after 10 rings. • If the message recording memory runs out, the answering
  • Sony SPP-A985 | Operating Instructions - Page 60
    with the date and time* as shown in the following example. If your Caller ID service includes the caller name service, the caller's name also appears on the display (up to 15 letters). Handset Caller's name Caller's phone number The date and time received SMITH JOHN 1-201-123-4567 * The
  • Sony SPP-A985 | Operating Instructions - Page 61
    the Caller ID list You can look through the Caller ID list to check the phone number and/or name of the calls received on the handset's display. Note that the display on the base phone shows the current caller's phone number and/or name only, and you cannot view the caller ID list on the
  • Sony SPP-A985 | Operating Instructions - Page 62
    list Old data will be erased automatically when a 21st call comes in, but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want to erase from the Caller ID list (see page 61). 2 Press Jog
  • Sony SPP-A985 | Operating Instructions - Page 63
    To erase the entire list at once 1 Display any Caller ID data. SMITH JOHN 1-201-123-4567 2 Press Jog Dial. DIAL PGM ERASE 1-201-123-4567 3 Turn Jog Dial up to make "ERASE"
  • Sony SPP-A985 | Operating Instructions - Page 64
    ). SMITH JOHN 1-201-123-4567 2 Confirm the number and press Jog Dial. DIAL PGM ERASE 1-201-123-4567 3 Press Jog Dial again. The phone automatically dials the displayed number. Notes • If the number displayed in step 1 is not the one you should call back, you can change the number of digits of the
  • Sony SPP-A985 | Operating Instructions - Page 65
    seconds to elapse between each step of the procedure. • If the number displayed in step 1 is not the one you should store, you can change the number of digits of the phone number as described on page 66. • If the phone is connected to a Private Branch Exchange (PBX), you may need to add
  • Sony SPP-A985 | Operating Instructions - Page 66
    ID list is different from the actual phone number, you need to adjust the number of digits of the phone number to call back or store into the Phone Directory. 1 While the phone number from the Caller ID list is displayed, press (#) repeatedly until the phone number with the correct number of digits
  • Sony SPP-A985 | Operating Instructions - Page 67
    JOHN 201-123-4567 SMITH JOHN 1-123-4567 SMITH JOHN 1-201-123-4567 SMITH JOHN 123-4567 2 Continue the operation to call or store the phone number with the correct number of digits (pages 64 and 65). Notes • You need to adjust the number of digits each time you call back
  • Sony SPP-A985 | Operating Instructions - Page 68
    ID with call waiting" service, you will not be able to see the name and number of the second caller. When a new call comes in while you are talking, you hear two short beeps. The caller's name and/or phone number of the new call appears on the display for about 20 seconds
  • Sony SPP-A985 | Operating Instructions - Page 69
    shorter cord for mounting. 3 Attach the wall bracket to the center of the base phone. Align the f marks of the wall bracket with those of the base phone. 4 Plug the telephone line cord to the telephone outlet, and hook the base phone to the wall plate. 5 Plug the AC power adaptor to an AC outlet
  • Sony SPP-A985 | Operating Instructions - Page 70
    tabs click and go into the holes on the sides of the handset. Note To prevent the handset from dropping, make sure that each tab is completely inserted. the headset You can talk on the handset without using your hands by connecting Sony TL-HD1 headset (optional) to the I (HEADSET) jack on the
  • Sony SPP-A985 | Operating Instructions - Page 71
    NICKEL-CADMIUM BATTERIES Nickel-Cadmium batteries are recyclable. You can help preserve our environment by returning your unwanted batteries to your phone and handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony
  • Sony SPP-A985 | Operating Instructions - Page 72
    this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Making calls Symptom Remedy You hear five short error beeps when you press (TALK). • Make sure you have set up the base phone correctly (page 10). • Move the handset closer
  • Sony SPP-A985 | Operating Instructions - Page 73
    • This is the out-of-range alarm. Move the handset closer to the base phone within one minute. You hear a beep every three • The battery is weak. Charge the battery for more than seconds and E and "BATTERY 12 hours (page 13). LOW" appears on the display. You hear five short error beeps • Make sure
  • Sony SPP-A985 | Operating Instructions - Page 74
    Troubleshooting (continued) Answering machine Symptom Message is not recorded. No sound from the speaker of the base phone. The caller's message is interrupted. The clock is incorrect. The phone does not accept your remote ID code (security code). The line is disconnected when you call your phone
  • Sony SPP-A985 | Operating Instructions - Page 75
    Caller ID data is displayed. The caller's name and/or phone number does not appear on the display during call waiting. • Make sure you have subscribed to "Caller ID with call waiting" service (page 68). • Make sure nobody is talking with another phone on the same telephone line. You cannot dial
  • Sony SPP-A985 | Operating Instructions - Page 76
    Troubleshooting (continued) Message counter The message counter on the base phone shows the following information. When the time is cleared or delayed due to a power interruption, or when you connect the base phone to the AC outlet for the first time. Reset the time correctly (page 46). The
  • Sony SPP-A985 | Operating Instructions - Page 77
    See page 9. Handset Power source Rechargeable battery pack BP-T23 Battery charging time Approx. 12 hours Battery life Standby: Approx Approx. 9.5 oz (approx. 270 g), battery included Base phone Power source DC 9V from AC power adaptor AC-T131 Battery charging time Approx. 24 hours Dimensions Approx
  • Sony SPP-A985 | Operating Instructions - Page 78
    Area code 16 Audible message alert 50 B Battery pack charging 13 duration 14 C Call waiting service 25, 26, 68 Caller ID 60 Caller ID list 61 calling back 64 memory match function 60 storing in Phone Directory 65 Caller ID with call waiting 68 Carrying the handset by the belt clip 70 Connection 11
  • Sony SPP-A985 | Operating Instructions - Page 79
    time 46, 53 Storing Caller ID data in Phone Directory 65 Switching phones during a call 41 T, U Toll saver 49 Talking between the phones 42 Tone dialing dialing mode 12 switching to 25, 26 Transferring a call 44 Troubleshooting 72 V, W, X, Y, Z Volume handset 25, 30 speaker 26, 31, 54 Additional
  • Sony SPP-A985 | Operating Instructions - Page 80
    For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.sony.com/productregistration Sony Corporation Printed in China
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
3-223-813-
11
(1)
©2000 Sony Corporation
SPP-A985
Cordless
Telephone
with Answering System
Operating Instructions
US