Sony SPP-S2720 Operating Instructions
Sony SPP-S2720 Manual
 |
UPC - 027242585201
View all Sony SPP-S2720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony SPP-S2720 manual content summary:
- Sony SPP-S2720 | Operating Instructions - Page 1
3-232-392-13 (1) Cordless Telephone Operating Instructions US Hearing-Aid Compatible SPP-S2720 ©2001 Sony Corporation - Sony SPP-S2720 | Operating Instructions - Page 2
your Sony dealer regarding this product. Model No. SPP-S2720 Serial No 2US Caution You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Privacy of communications may not be ensured when using this phone. Note - Sony SPP-S2720 | Operating Instructions - Page 3
service. 7. If trouble is experienced with this equipment (SPP-S2720), for repair or warranty information, please contact Sony Direct problem is resolved. 8. All repairs will be performed in an authorized Sony service station. 9. This equipment may not be used on coin service provided by the Phone - Sony SPP-S2720 | Operating Instructions - Page 4
fuga de gas, no utilice el teléfono en la vecindad de dicha fuga. 4. Utilice solamente el cable de alimentación y las pilas indicados en este manual. No tire las pilas al fuego. Podrían explotar. Compruebe los códigos locales con respecto a las instrucciones especiales sobre cómo deshacerse de ellas - Sony SPP-S2720 | Operating Instructions - Page 5
necesarias a fin de mantener ininterrumpido el servicio. 7. Si experimenta algún problema con este equipo (SPP-S2720), con respecto a la reparación o a la información sobre la garantía, póngase en contacto con Sony Direct Response Center: Tel 1-800-222-7669 (EE. UU. solamente). Si el equipo causa - Sony SPP-S2720 | Operating Instructions - Page 6
11 Step 2: Setting up the base unit 14 Step 3: Preparing the battery pack 16 Step 4: Choosing the dialing mode 17 Step 5: Entering the area code 21 Setting up the EZ Access function 23 Registering additional cordless handsets 25 Changing the language of the display 26 Identifying the parts Basics - Sony SPP-S2720 | Operating Instructions - Page 7
Additional Information 61 Carrying the cordless handset by the belt clip 62 Notes on power sources 63 Maintenance 64 Troubleshooting 68 Specifications 69 Index Back cover LIMITED WARRANTY Table of contents 7US - Sony SPP-S2720 | Operating Instructions - Page 8
- talkie feature, it is necessary to purchase the SPP-H273 Sony cordless handset used for the QuadraStation 2.4 exclusively. • Be sure to register the additional cordless handset(s) to the base unit before use. (See "Registering additional cordless handsets" on page 23.) • Some procedures may vary - Sony SPP-S2720 | Operating Instructions - Page 9
up your phone: Steps 1 to 5. Step 1 (page 10) First, unpack the phone and the battery pack into the cordless handset and charge it for more than 12 hours. Step 4 (page 16) Choose an appropriate dialing mode. Step 5 (pages 17 to 20) Enter the area code to use the Caller ID service. Cordless handset - Sony SPP-S2720 | Operating Instructions - Page 10
Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. AC power adaptor (AC-T46) Base unit Cordless handset Telephone line cord Rechargeable battery pack (BP-T38) 10US Getting Started - Sony SPP-S2720 | Operating Instructions - Page 11
the best location • Connect the base unit Choose the best location Where you place the base unit affects the reception quality of the cordless handset. Away from noise sources such as a window by a street with heavy traffic Away from television sets and other electronic equipment Away from - Sony SPP-S2720 | Operating Instructions - Page 12
Step 2: Setting up the base unit (continued) Connect the base unit 3 Hook the cord. 2 To an AC outlet To DC IN 9V AC power adaptor (supplied AC-T46) To LINE 1 To a telephone outlet Telephone line cord (supplied) 1 Connect the telephone line cord to the LINE jack and to a telephone outlet. 2 - Sony SPP-S2720 | Operating Instructions - Page 13
so that you can unplug the AC power adaptor easily. Polarity of the plug Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Modular Getting Started Getting Started 13US - Sony SPP-S2720 | Operating Instructions - Page 14
lamp on the base unit lights up and "HANDSET 1" appears on the display of the cordless handset when the cordless handset is properly seated on the charge terminals of the base unit. Charge the battery pack for more than 12 hours so that the battery is fully charged. The CHARGE lamp remains lit - Sony SPP-S2720 | Operating Instructions - Page 15
use. • If you leave the battery pack in the cordless handset without charging it, the battery pack will be completely discharged. battery has expired and needs replacement. Contact your local Sony authorized dealer or service center, and ask for a Sony BP-T38 rechargeable battery pack. Note Battery - Sony SPP-S2720 | Operating Instructions - Page 16
mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). When you set the dialing mode with the cordless handset, make sure the other cordless handsets* are not in use before you start the setting. You cannot set the dialing mode while the system is in use. * If - Sony SPP-S2720 | Operating Instructions - Page 17
for all local calls in your area, see "To enter the local area code (For 10 digits phone number users)" on page 19. When you enter the area code with the cordless handset, make sure the other cordless handsets* are not in use before you start the setting. You cannot enter area code while the system - Sony SPP-S2720 | Operating Instructions - Page 18
and storing the Caller ID data into the Phone Directory cannot be performed. • If the home area code is not correctly entered, "ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset closer to the base unit, make sure - Sony SPP-S2720 | Operating Instructions - Page 19
area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 ) is pressed in step 5. Move the cordless handset closer to the base unit, make sure the other cordless handsets* are not in use before you start the - Sony SPP-S2720 | Operating Instructions - Page 20
Step 5: Entering the area code (continued) To change the local area code 1 Performsteps1to3onpage19. The current local area code appears on the display. 2 Press (ERASE) toerasethecurrentlocalareacode. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You hear a long confirmation - Sony SPP-S2720 | Operating Instructions - Page 21
number of your special services e.g. long distance provider. Also, you can set up just a phone number with the function for onetouch dialing. When the system has two or more cordless handsets, you can assign a different access number or phone number to each cordless handset. Getting Started (ERASE - Sony SPP-S2720 | Operating Instructions - Page 22
, see page 31. -for redialing, see page 33. -for making calls from the Phone Directory, see page 41. -for making calls from Caller ID list, see page 54. to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 3 on page 21, do as follows: 1 Entertheoutsidelineaccessdigit - Sony SPP-S2720 | Operating Instructions - Page 23
additional cordless handsets The phone system includes a cordless handset. You can expand the system including a total of four cordless handsets. Be sure to register the ID number of the additional cordless handset called "station number" to the base unit before using the additional cordless handset - Sony SPP-S2720 | Operating Instructions - Page 24
number of the cordless handset appears on the display of the cordless handset while it is seated on the charger. You can also utilize the supplied sticker of the station number and attaching on the cordless handset. (For details, see Operating Instructions of SPP-H273.) HANDSET 2 NEW OLD MASSAGE - Sony SPP-S2720 | Operating Instructions - Page 25
Getting Started Changing the language of the display You can choose English or Spanish as the display language by following the procedure below. To change the language from English to Spanish 1 Press (PGM). Turn Press 2 TurnJogDialtochoose "ESPANOL", and then press Jog Dial. (GO BACK) NO SI - Sony SPP-S2720 | Operating Instructions - Page 26
for you to retrieve in voice mail service. 2 NEW CALL lamp (p. 51) Flashes when there is a "NEW" data in the Caller ID list. 3 IN USE lamp (p. 30) Lights when the handset is in use. 4 CHARGE lamp (p. 14) Lights while the battery is being charged. 5 HANDSET LOCATOR button (p. 46) Allows you to page - Sony SPP-S2720 | Operating Instructions - Page 27
Getting Started 6 7 89 6 Antenna (p. 12) 7 Hook for AC power adaptor cord (p. 12) 8 DC IN 9V jack (p. 12) 9 LINE (telephone line) jack (p. 12) continued Getting Started 27US - Sony SPP-S2720 | Operating Instructions - Page 28
Identifying the parts (continued) Cordless handset 1 2 9 3 0 4 qa 5 6 qs qd 7 8 1 Antenna 2 Speaker 3 Display window (p. 30, 50) 4 TALK button (p. 30) Lets you make or receive a call. 5 HOLD button (p. 31) Puts a call on hold. 6 Battery compartment (p. 14) 7 CALL WAITING/FLASH button (p. 31 - Sony SPP-S2720 | Operating Instructions - Page 29
to tone dialing. qg RINGER qh I (HEADSET) jack (p. 31, 35, 61) qj VOL (volume) switch (p. 31) Adjust the cordless handset volume. qk # button (p. 56) Used to change the number of digits of the phone number in the Caller ID list. ql PGM (program) button (p. 17, 37) w; REDIAL/PAUSE button (p. 22, 33 - Sony SPP-S2720 | Operating Instructions - Page 30
beeps and "NO CONNECTION" appears on the display, move closer to the base unit. (EZ ACCESS) (ERASE) (CALL WAITING/FLASH) 3 Dial the phone number. 4 When you're done talking, press (OFF) or replace the cordless handset on the base unit. The display turns off. To make a call after checking the - Sony SPP-S2720 | Operating Instructions - Page 31
function, just press (EZ ACCESS) to dial the phone number (i.e. skip step 2). Additional tasks To Do this Adjust the cordless handset volume Put a call on hold*1 Switch to tone dialing temporarily Switch to another call ("call waiting" service*2) Set the VOL switch to H (high), M (middle) or - Sony SPP-S2720 | Operating Instructions - Page 32
the initial charge time (approx. 10 minutes), "PLEASE WAIT..." and "BATTERY LOW" appear on the display and the cordless handset cannot be used. After "BATTERY LOW" turns off, you may be able to use the cordless handset, but the battery duration will be very short; thus it is recommended that you - Sony SPP-S2720 | Operating Instructions - Page 33
Redialing The cordless handset stores five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial. 3 Press Jog Dial. (EZ ACCESS) (PGM) 4 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will - Sony SPP-S2720 | Operating Instructions - Page 34
Jog Dial to choose "YES", and then press Jog Dial. You hear a long confirmation beep, and the number is erased. To erase the entire dialed phone numbers at once 1 Press (PGM). 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Turn Jog Dial to choose "ERASE ALL RDL - Sony SPP-S2720 | Operating Instructions - Page 35
Basics Receiving calls (HOLD) (CALL WAITING/FLASH) (PGM) I (HEADSET) jack VOL switch 1 When you hear the phone ring: • Press (TALK). or • Pick up the cordless handset from the base unit when the cordless handset is placed on the base unit. (When Quick talk is set to "ON"; see page 36) "TALK" - Sony SPP-S2720 | Operating Instructions - Page 36
service from your telephone company. Tip To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer volume on the cordless handset service. • the name stored in the Phone Directory appears on the display if the call matches the number stored in the Phone - Sony SPP-S2720 | Operating Instructions - Page 37
be stored. When the system has two or more cordless handsets, you can store a different set of phone numbers to each cordless handset. Storing phone numbers and names Example: to store "SONY" "1234567". 1 Press (PGM). Turn Press (GO BACK) PHONE DIRECTORY MEMORY MANAGE NEW OLD MASSAGE RING OFF - Sony SPP-S2720 | Operating Instructions - Page 38
OLD MASSAGE RING OFF ENTER NAME 0123456789 NEW OLD MASSAGE RING OFF 4 Press (PGM). "ENTER NUMBER" appears on the display. SONY ENTER NUMBER NEW OLD MASSAGE RING OFF 5 Enter the phone number by pressing the dialing keys. You can enter up to 20 digits, including a tone and a pause, each of which - Sony SPP-S2720 | Operating Instructions - Page 39
number, you will hear five short error beeps and "THE MEMORY IS FULL" will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 43). • Names cannot be entered using the dialing keys. • Do not allow more than 60 seconds to - Sony SPP-S2720 | Operating Instructions - Page 40
continued) Making calls from the Phone Directory Turn Press 1 Press Jog Dial. "PHONE DIRECTORY" appears on the display. PHONE DIRECTORY ABC DEF NEW OLD Dial. TUV WXYZ etc NEW OLD MASSAGE RING OFF BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 4 Press Jog Dial. (GO BACK) - Sony SPP-S2720 | Operating Instructions - Page 41
the next following group will be displayed. • You may press (TALK) on the cordless handset to make a call instead of doing steps 4 and 5. • If an access with the EZ access function, you can add the access number to the phone number and make a call by pressing (EZ ACCESS) after step 3. For setting - Sony SPP-S2720 | Operating Instructions - Page 42
enter the new name. If you want to change only the number, skip this step. 5 Press (PGM). The cursor is at the right of the phone number. SONY 1234567_ NEW OLD MASSAGE RING OFF 6 Press (ERASE) to erase the number, and enter the new number. If you don't want to change the - Sony SPP-S2720 | Operating Instructions - Page 43
the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on page 40. 2 Press Jog Dial. BROWN JOHN SONY SMITH Dial to choose "MEMORY MANAGE", and then press Jog Dial. (GO BACK) PHONE DIRECTORY MEMORY MANAGE NEW OLD MASSAGE RING OFF Telephone Features 3 Turn Jog Dial - Sony SPP-S2720 | Operating Instructions - Page 44
system. Make sure the other cordless handsets to receive the memory are not in use. To transfer one phone number from the Phone Directory Example: From HANDSET 1 to HANDSET 2. 1 Display the name you want to transfer by doing steps 1 to 3 on page 40. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING - Sony SPP-S2720 | Operating Instructions - Page 45
The Phone Directory receiving the transfer will be totally overwritten. 1 Press (PGM). 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Press Jog Dial. (GO BACK) SEND ALL DIR ERASE ALL CID NEW OLD MASSAGE RING OFF 4 When the system has an additional cordless handset Skip - Sony SPP-S2720 | Operating Instructions - Page 46
the base unit. Note that you cannot page if the handset is in use. Press (HANDSET LOCATOR). All the cordless handsets on the system ring for about one minute. To stop ringing, press (OFF) on any of them. Tip You can page the handset even when "RINGER VOLUME" is set to "RING OFF". 46US Telephone - Sony SPP-S2720 | Operating Instructions - Page 47
Switching the phones during a call (when the system has any other additional cordless handsets) You can easily switch from the cordless handset to another cordless handset without disconnecting the call. This function works only when one or more additional cordless handsets are available on the - Sony SPP-S2720 | Operating Instructions - Page 48
(TALK) or (INTERCOM), you can talk with each other. 4 When you are done talking, replace the cordless handset on the base unit or the charger, or press (OFF). If no one answers the phone Press (INTERCOM) again. Notes • If there is an incoming outer line call during the intercom conversation between - Sony SPP-S2720 | Operating Instructions - Page 49
1. "TALK" appears on the display of the cordless handset whose station number is 2. If no one answers the phone Press (INTERCOM) again. Tip You can receive an intercom call on the cordless handset even when the ringer volume is set to off. The cordless handset will ring at a low level. Intercom - Sony SPP-S2720 | Operating Instructions - Page 50
Caller ID service includes the caller name service or if the phone number stored in the Phone Directory matches with the Caller ID data phone number, the ring if you receive a call from a phone number which is stored in the Phone Directory on the cordless handset (see page 37). 50US Note The memory - Sony SPP-S2720 | Operating Instructions - Page 51
all calls received; even if they were not answered. Viewing the Caller ID list You can look through the Caller ID list on the cordless handset to check the phone number and/or name of the calls received. Turn Press 1 Turn Jog Dial. The display shows the number of "NEW CALL" (calls which - Sony SPP-S2720 | Operating Instructions - Page 52
Old data will be erased automatically when a 71st call comes in, but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want to erase from the Caller ID list (see page 51). SMITH JOHN - Sony SPP-S2720 | Operating Instructions - Page 53
. • When "ERROR" appears on the display and five short error beeps are heard after Jog Dial is pressed in step 4, move the cordless handset closer to the base unit, make sure the other cordless handsets* are not in use and then start over the procedure. * If the system includes any other additional - Sony SPP-S2720 | Operating Instructions - Page 54
. 54US Tips • You may press (TALK) on the cordless handset to make a call instead of doing steps 2 and 3. • If an access number of the long distance call is set up with the EZ access function, you can add the access number to the phone number and make a call by pressing (EZ ACCESS) after - Sony SPP-S2720 | Operating Instructions - Page 55
RING OFF SMITH JOHN_ ABCDEFGHIJKLMN OPQRSTUVWXYZ NEW OLD MASSAGE RING OFF 4 Press (PGM). The cursor is at the right of the phone number. Enter or change the phone number, if necessary (see page 42). SMITH JOHN 12011234567_ NEW OLD MASSAGE RING OFF 5 Press (PGM). You hear a long confirmation beep - Sony SPP-S2720 | Operating Instructions - Page 56
• If the area code is not entered, "ENTER AREA CODE" will appear on the display, and you will not be able to store into the Phone Directory. Enter the area code (see page 17). • Do not allow more than 60 seconds to elapse during the operation procedure. • If the number displayed - Sony SPP-S2720 | Operating Instructions - Page 57
NEW OLD MASSAGE RING OFF SMITH JOHN 123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF 2 Continue the operation to call or store the phone number with the correct number of digits (pages 54 and 55). Notes • You need to adjust the number of digits each time you call back - Sony SPP-S2720 | Operating Instructions - Page 58
to "Caller ID with call waiting" as a single service. This is a new service that combines the two services. Even though you now have a "Caller ID with call waiting" compatible phone, unless you subscribe to the combined "Caller ID with call waiting" service, you will not be able to see the name - Sony SPP-S2720 | Operating Instructions - Page 59
If you subscribe to your telephone company's message service which includes this feature, the display will show that you have messages waiting to be retrieved. If you have messages VOICE MAIL lamp "MESSAGES WAITING" appears on the display on the cordless handset, and the VOICE MAIL lamp on the - Sony SPP-S2720 | Operating Instructions - Page 60
company can provide you with more information about your service). The first time this phone receives a voice mail message, it will set itself to the FSK service and will lock out the stutter service if your telephone company is in FSK service. When you move or change your telephone company, you - Sony SPP-S2720 | Operating Instructions - Page 61
on the belt using the belt clip. Open the belt clip of the cordless handset by pressing the top of it, and then attach the cordless handset to the belt. Using the headset You can talk on the cordless handset without using your hands by connecting a headset (optional) to the I (HEADSET) jack on - Sony SPP-S2720 | Operating Instructions - Page 62
• If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 batteries in household or business trash may be prohibited. RBRC (Rechargeable Battery Recycling Corporation) advises you about spent battery collection by the following phone - Sony SPP-S2720 | Operating Instructions - Page 63
may damage the finish of the cabinet. • If the charge terminals of the base unit and cordless handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. Additional Information 63US Additional Information - Sony SPP-S2720 | Operating Instructions - Page 64
this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Making calls Symptom Remedy You hear five short error beeps when you press (TALK). • Make sure you have set up the base unit correctly (page 11). • Move the cordless handset - Sony SPP-S2720 | Operating Instructions - Page 65
center. Please contact 1-800-222-7669 for Sony Direct Response Center to get the service location. You do not know the station • Place the cordless handset on the charger. The station number of the cordless handset. number of the cordless handset appears on the display. • Attach the supplied - Sony SPP-S2720 | Operating Instructions - Page 66
Troubleshooting (continued) Caller ID Symptom Remedy The caller's name and/or phone number does not appear on the display. • Make sure you have subscribed to Caller ID service. • Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX). • The call is made - Sony SPP-S2720 | Operating Instructions - Page 67
the base unit or the charger properly. • Make sure the cordless handset is placed on the base unit with front side facing forward. • Use only the supplied AC-T46 AC power adaptor for the base unit. The battery duration is short. • The battery pack was charged less than 12 hours (due to power - Sony SPP-S2720 | Operating Instructions - Page 68
-Spectrum Access method FDMA-TDD Frequency band 2.4075 - 2.4720 GHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 10. Cordless handset Power source Rechargeable battery pack BP-T38 Battery life Standby: Approx. 6 days Talk: Approx. 5 hours - Sony SPP-S2720 | Operating Instructions - Page 69
14 Storing Caller ID list into Phone Directory 55 Switching phones during a call 47 T Talking between the phones 48 Tone dialing dialing mode 16 switching to 31 Transferring a call 49 Troubleshooting 64 U UNKNOWN NUMBER/ NAME/CALLER 50 V Voice mail service 59 Volume cordless handset 31, 36 ringer 36 - Sony SPP-S2720 | Operating Instructions - Page 70
- Sony SPP-S2720 | Operating Instructions - Page 71
- Sony SPP-S2720 | Operating Instructions - Page 72
For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.sony.com/productregistration Sony Corporation Printed in Taiwan, R.O.C.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
3-232-392-
13
(1)
Operating Instructions
Cordless
Telephone
US
©2001 Sony Corporation
SPP-S2720
Hearing-Aid Compatible