Sony SPP-S2730 Operating Instructions

Sony SPP-S2730 - Cordless Telephone Manual

Get Sony SPP-S2730 - Cordless Telephone PDF manuals and user guides View all Sony SPP-S2730 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony SPP-S2730 manual content summary:

  • Sony SPP-S2730 | Operating Instructions - Page 1
    3-232-156-13 (1) Cordless Telephone Operating Instructions US Hearing-Aid Compatible SPP-S2730 ©2001 Sony Corporation
  • Sony SPP-S2730 | Operating Instructions - Page 2
    Sony dealer regarding this product. Model No. SPP-S2730 Serial No 2US Caution You are cautioned that any changes or modifications not expressly approved in this manual , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
  • Sony SPP-S2730 | Operating Instructions - Page 3
    uninterrupted service. 7. If trouble is experienced with this equipment (SPP-S2730), for repair or warranty information, please contact Sony Direct the problem is resolved. 8. All repairs will be performed in an authorized Sony service station. 9. This equipment may not be used on coin service
  • Sony SPP-S2730 | Operating Instructions - Page 4
    fuga de gas, no utilice el teléfono en la vecindad de dicha fuga. 4. Utilice solamente el cable de alimentación y las pilas indicados en este manual. No tire las pilas al fuego. Podrían explotar. Compruebe los códigos locales con respecto a las instrucciones especiales sobre cómo deshacerse de ellas
  • Sony SPP-S2730 | Operating Instructions - Page 5
    necesarias a fin de mantener ininterrumpido el servicio. 7. Si experimenta algún problema con este equipo (SPP-S2730), con respecto a la reparación o a la información sobre la garantía, póngase en contacto con Sony Direct Response Center: Tel 1-800-222-7669 (EE. UU. solamente). Si el equipo causa
  • Sony SPP-S2730 | Operating Instructions - Page 6
    Table of contents Getting Started 8 Welcome 9 Read this first 10 Step 1: Checking the package contents 11 Step 2: Setting up the base phone 14 Step 3: Preparing the battery pack 16 Step 4: Choosing the dialing mode 17 Step 5: Entering the area code 21 Step 6: Setting the day and time 23 Setting up
  • Sony SPP-S2730 | Operating Instructions - Page 7
    69 Using voice mail service 69 If you have messages Additional Information 71 Mounting the base phone on a wall 72 Carrying the cordless handset by the belt clip 73 Notes on power sources 74 Maintenance 75 Troubleshooting 79 Specifications 80 Index Back cover LIMITED WARRANTY Table of contents
  • Sony SPP-S2730 | Operating Instructions - Page 8
    utilize the walkie- talkie feature, it is necessary to purchase the SPP-H273 Sony cordless handset used for the QuadraStation 2.4 exclusively. • Be sure assigned to the system. The distinctions are explicitly explained in this manual. In such a case, see the appropriate procedure. Other convenient
  • Sony SPP-S2730 | Operating Instructions - Page 9
    than 12 hours. Step 4 (page 16) Choose an appropriate dialing mode. Step 5 (pages 17 to 20) Enter the area code to use the Caller ID service. Step 6 (pages 21 to 22) Set the day and time to stamp day and time for the incoming messages. Cordless handset That's it! For using
  • Sony SPP-S2730 | Operating Instructions - Page 10
    Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. AC power adaptor for the base phone (AC-T46) Base phone Cordless handset Charger/AC power adaptor for the charger (AC-T127) Handset
  • Sony SPP-S2730 | Operating Instructions - Page 11
    Getting Started Step 2 Setting up the base phone Do the following steps: • Choose the best location • Connect the base phone Choose the best location Where you place the base phone affects the reception quality of the cordless handset. Away from noise sources such as a window by a street with
  • Sony SPP-S2730 | Operating Instructions - Page 12
    Step 2: Setting up the base phone (continued) Connect the base phone If you want to hang the base phone on the wall, see page 71. 1 4 Hook the cord. 3 To an AC outlet To DC IN 9V AC power adaptor (supplied AC-T46) To LINE To HANDSET 2 To a telephone outlet Telephone line cord (supplied) To
  • Sony SPP-S2730 | Operating Instructions - Page 13
    so that you can unplug the AC power adaptor easily. Polarity of the plug Tip If your telephone outlet is not modular, contact your telephone service company for assistance. Modular Getting Started Getting Started 13US
  • Sony SPP-S2730 | Operating Instructions - Page 14
    Step 3 Preparing the battery pack Charge the battery pack for more than 12 hours before you start using your cordless handset. 1 Slideopenthebattery compartment lid of the cordless handset. BP-T38 Red Black 2 Connectthebatteryconnector with correct polarity (black wire goes on lower side and red
  • Sony SPP-S2730 | Operating Instructions - Page 15
    after 12 hours of charging, the usable life of the battery has expired and needs replacement. Contact your local Sony authorized dealer or service center, and ask for a Sony BP-T38 rechargeable battery pack. Note Battery life may vary depending on usage condition and ambient temperature. Getting
  • Sony SPP-S2730 | Operating Instructions - Page 16
    Step 4 Choosing the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). You can select the dialing mode on both the base phone and cordless handset. The dialing mode that has been last set either with the base phone or cordless handset is selected.
  • Sony SPP-S2730 | Operating Instructions - Page 17
    Step 5 Getting Started Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter the area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone
  • Sony SPP-S2730 | Operating Instructions - Page 18
    Step 5: Entering the area code (continued) 4 Enterthethreedigitsofyourhomeareacode using the dialing keys. 5 Press (PGM). You hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 2. To enter a different home area code, see "To change the
  • Sony SPP-S2730 | Operating Instructions - Page 19
    Getting Started To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number). If a call does not match one of the local area codes you
  • Sony SPP-S2730 | Operating Instructions - Page 20
    Step 5: Entering the area code (continued) To change the local area code 1 Performsteps1to3onpage19. The current local area code appears on the display. 2 Press (ERASE) toerasethecurrentlocalareacode. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You hear a long confirmation
  • Sony SPP-S2730 | Operating Instructions - Page 21
    Getting Started Step 6 Setting the day and time You can set the day and time only with the cordless handset. Make sure the base phone* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting
  • Sony SPP-S2730 | Operating Instructions - Page 22
    Step 6: Setting the day and time (continued) 5 PressJogDial. 6 Settheminute(00to59)byturningJogDial. 7 PressJogDial. 8 Select "AM" or "PM" by turning Jog Dial, and then press Jog Dial. You hear a long confirmation beep. Then the phone starts counting time. ENTER MIMUTE AND PRESS JOG DIAL 11:00 NEW
  • Sony SPP-S2730 | Operating Instructions - Page 23
    of frequently used number. After setting up the access number, you only need to press (EZ ACCESS) for dialing the access number of your special services e.g. long distance provider. Also, you can set up just a phone number with the function for onetouch dialing. You can set up the EZ Access function
  • Sony SPP-S2730 | Operating Instructions - Page 24
    Setting up the EZ Access function (continued) To use the EZ Access -for making calls, see page 33, 35. -for redialing, see page 37. -for making calls from the Phone Directory, see page 47. -for making calls from Caller ID list, see page 64. To change the access number 1 Performsteps1and2onpage23.
  • Sony SPP-S2730 | Operating Instructions - Page 25
    Getting Started Registering additional cordless handsets The phone system includes a cordless handset. You can expand the system including a total of four cordless handsets. Be sure to register the ID number of the additional cordless handset called "station number" to the base phone before using
  • Sony SPP-S2730 | Operating Instructions - Page 26
    seated on the charger. You can also utilize the supplied sticker of the station number and attaching on the cordless handset. (For details, see Operating Instructions of SPP-H273.) HANDSET 2 NEW OLD MASSAGE RING OFF 26US Getting Started
  • Sony SPP-S2730 | Operating Instructions - Page 27
    Getting Started Changing the language of the display You can choose English or Spanish as the display language by following the procedure below. You can select the display language both the base phone and the cordless handset, further more, you can select the display language on each unit (base
  • Sony SPP-S2730 | Operating Instructions - Page 28
    five numbers called/inserts a pause in the dialing sequence. qh CALL WAITING/FLASH button (p. 36, 68) Switches to a second call if you have "call waiting" service, or lets you make a new call. 28US Getting Started
  • Sony SPP-S2730 | Operating Instructions - Page 29
    Getting Started wa ws wd wf wg qj INTERCOM button (p. 55) Lets you talk between the base phone and cordless handset. qk HOLD button (p. 36) Puts a call on hold. ql SPEAKERPHONE button (p. 35) Lets you make or receive a call. w; MIC (microphone) wa Antenna (p. 12, 71) ws Hook for AC power
  • Sony SPP-S2730 | Operating Instructions - Page 30
    (p. 33) Puts a call on hold. 6 Battery compartment (p. 14) 7 CALL WAITING/FLASH button (p. 33, 68) Switches to a second call if you have "call waiting" service, or lets you make a new call. 8 EZ ACCESS button (p. 23, 33) Lets you make a call with the registered access number. 9 Jog Dial (p. 17, 43
  • Sony SPP-S2730 | Operating Instructions - Page 31
    Getting Started qh qj qf qk ql w; qg wa qf TONE button (p. 33) Allows you to switch temporarily to tone dialing. qg RINGER qh I (HEADSET) jack (p. 33, 39, 72) qj VOL (volume) switch (p. 33) Adjust the cordless handset volume. qk # button (p. 66) Used to change the number of digits of the phone
  • Sony SPP-S2730 | Operating Instructions - Page 32
    Basics Making calls Making calls with the cordless handset 1 Pick up the cordless handset from the charger. (HOLD) (*TONE) (EZ ACCESS) (ERASE) (CALL WAITING/FLASH) I (HEADSET) jack VOL switch 2 Press (TALK) and wait until "TALK" appears on the display and the display also shows the talk time in
  • Sony SPP-S2730 | Operating Instructions - Page 33
    to tone dialing temporarily Press (*TONE) after you're connected. The line will remain in tone dialing until disconnected. Switch to another call ("call waiting" service*) Press (CALL WAITING/FLASH). Press (CALL WAITING/FLASH) again to return to the first caller. * You need to subscribe to this
  • Sony SPP-S2730 | Operating Instructions - Page 34
    Making calls (continued) Notes • When making a call on the cordless handset, " " appears on the display indicating the receiver sensitivity with the base phone. Three bars indicate a good reception, no bar indicates a bad reception. When calling from an area with poor reception, you may experience
  • Sony SPP-S2730 | Operating Instructions - Page 35
    Making calls with the base phone 1 Pick up the handset or press (SPEAKERPHONE) on the base phone. (REDIAL/PAUSE) (PROGRAM) (CALL WAITING/ FLASH) Jog Dial (VOL +) (VOL -) "TALK" or "SPEAKERPHONE" appears on the display and the display also shows the talk time in hours, minutes and seconds. 2
  • Sony SPP-S2730 | Operating Instructions - Page 36
    to tone dialing temporarily Press (*TONE) after you're connected. The line will remain in tone dialing until disconnected. Switch to another call ("call waiting" service*) Press (CALL WAITING/ FLASH). Press (CALL WAITING/ FLASH) again to return to the first caller. * You need to subscribe to the
  • Sony SPP-S2730 | Operating Instructions - Page 37
    Basics Redialing Both the base phone and the cordless handset can each individually store five dialed phone numbers. Turn Press 1 Press (REDIAL/PAUSE). 2 Display the name or phone number you want to call by turning Jog Dial. 3 Press Jog Dial. (EZ ACCESS) (PGM) 4 Turn Jog Dial to choose "DIAL
  • Sony SPP-S2730 | Operating Instructions - Page 38
    Making calls (continued) To erase the dialed phone number one by one 1 Display the name or phone number you want to erase by doing steps 1 to 3 on page 37. 2 Turn Jog Dial to choose "ERASE REDIAL", and then press Jog Dial. 3 Turn Jog Dial to choose "YES", and then press Jog Dial. You hear a long
  • Sony SPP-S2730 | Operating Instructions - Page 39
    Basics Receiving calls Receiving calls with the cordless handset (HOLD) (CALL WAITING/FLASH) (PGM) I (HEADSET) jack VOL switch 1 When you hear the phone ring: • Press (TALK). or • Pick up the cordless handset from the charger when the cordless handset is placed on the charger. (When Quick talk
  • Sony SPP-S2730 | Operating Instructions - Page 40
    caller's number and/or name appears on the display when you receive a call (see page 60) or when another call comes in by "call waiting" service. • the name stored in the Phone Directory appears on the display if the call matches the number stored in the Phone Directory (memory match function
  • Sony SPP-S2730 | Operating Instructions - Page 41
    display. Press (HOLD), (SPEAKERPHONE), or pick up the handset from the base phone to resume the conversation. Switch to another call ("call waiting" service*) Press (CALL WAITING/ FLASH). Press (CALL WAITING/ FLASH) again to return to the first caller. Adjust the ringer volume of the base phone
  • Sony SPP-S2730 | Operating Instructions - Page 42
    Receiving calls (continued) Note Even when you set the ringer volume on the base phone to off, the cordless handset will ring when the ringer volume on the cordless handset is set to high or low. Tips • To inform you of an incoming call, the display shows "** RINGING **" even when you set the ringer
  • Sony SPP-S2730 | Operating Instructions - Page 43
    . Both the base phone and the cordless handset can each store up to 50 separate numbers. Storing phone numbers and names Example: to store "SONY" "1234567". Turn Press 1 Press (PGM). (Press (PROGRAM) on the base phone.) (GO BACK) PHONE DIRECTORY MEMORY MANAGE NEW OLD MASSAGE RING OFF (ERASE
  • Sony SPP-S2730 | Operating Instructions - Page 44
    as one digit. When the phone number of 16 digits or more has been entered, the phone number appears in two lines. SONY 1234567_ NEW OLD MASSAGE RING OFF SONY 1234567890123456 78_ NEW OLD MASSAGE RING OFF 6 Press (PGM) (or (PROGRAM)). You hear a long confirmation beep, and the name and the number
  • Sony SPP-S2730 | Operating Instructions - Page 45
    Telephone Features Notes • If you try to save a 51st phone number, you will hear five short error beeps and "THE MEMORY IS FULL" will be displayed. You cannot store the phone number. To store another phone number, erase one of the stored phone numbers (see page 49). • Names cannot be entered using
  • Sony SPP-S2730 | Operating Instructions - Page 46
    , select the "[etc]" group. 3 Select the name you want to call by turning Jog Dial. TUV WXYZ etc NEW OLD MASSAGE RING OFF BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 4 Press Jog Dial. (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF 46US Telephone Features
  • Sony SPP-S2730 | Operating Instructions - Page 47
    Telephone Features 5 Turn Jog Dial to choose "DIAL", and then press Jog Dial. The phone number will be dialed. Tips • When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. • If there is no data recorded in the selected alphabet group in step 2, the data
  • Sony SPP-S2730 | Operating Instructions - Page 48
    you want to change by doing steps 1 to 3 on page 46. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 2 Press Jog Dial. (GO BACK) DIAL EDIT ) on the base phone.) The cursor is at the right of the phone number. SONY 1234567_ NEW OLD MASSAGE RING OFF 6 Press (ERASE) to erase the number, and
  • Sony SPP-S2730 | Operating Instructions - Page 49
    the phone number one by one 1 Display the name you want to erase by doing steps 1 to 3 on page 46. 2 Press Jog Dial. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF (GO BACK) DIAL EDIT NEW OLD MASSAGE RING OFF Telephone Features 3 Turn Jog Dial to choose "ERASE DIRECTORY
  • Sony SPP-S2730 | Operating Instructions - Page 50
    . To transfer one phone number from the Phone Directory 1 Display the name you want to transfer by doing steps 1 to 3 on page 46. BROWN JOHN SONY SMITH JOHN NEW OLD MASSAGE RING OFF 2 Press Jog Dial. 3 Turn Jog Dial to choose "SEND DIRECTORY", and then press Jog Dial. (GO BACK) DIAL
  • Sony SPP-S2730 | Operating Instructions - Page 51
    To transfer all phone numbers from the Phone Directory The Phone Directory receiving the transfer will be totally overwritten. 1 Press (PGM). (Press (PROGRAM) on the base phone.) 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. 3 Press Jog Dial. (GO BACK) SEND ALL DIR ERASE ALL
  • Sony SPP-S2730 | Operating Instructions - Page 52
    Switching the phones during a call You can easily switch between the cordless handset and the base phone, or between the cordless handsets without disconnecting the call. Switching from the base phone to the cordless handset 1 Press (HOLD) on the base phone. The call is on hold and "HOLD" appears
  • Sony SPP-S2730 | Operating Instructions - Page 53
    Telephone Features Switching from the cordless handset to another cordless handset (When the system has an additional cordless handset) 1 Press (HOLD) on the cordless handset. The call is on hold and "HOLD" appears on the display. 2 Pick up another cordless handset from the charger (When Quick talk
  • Sony SPP-S2730 | Operating Instructions - Page 54
    Intercom Operation Talking between the phones - Intercom You can make an intercom call between the cordless handset and base phone, or between the cordless handsets. You can start the intercom from any phone. Talking from the cordless handset to the base phone Example: Making intercom call from the
  • Sony SPP-S2730 | Operating Instructions - Page 55
    Talking from the base phone to the cordless handset Example: Making intercom call from the base phone to the cordless handset whose station number is 1. 1 Press (INTERCOM). 2 When the system has one cordless handset Skip this step. When the system has an additional cordless handset Turn Jog Dial to
  • Sony SPP-S2730 | Operating Instructions - Page 56
    Talking between the phones - Intercom (continued) Talking between the cordless handsets - Walkie-Talkie function (When the system has an additional cordless handset) You can make an intercom conversation between a couple of cordless handsets (Walkie-Talkie function) of the same phone system far
  • Sony SPP-S2730 | Operating Instructions - Page 57
    Transferring a call You can transfer a call between the cordless handset and base phone, or between the cordless handsets without disconnecting the call. Transferring from the cordless handset to the base phone (OFF) Example: Transferring a call from the cordless handset whose station number is
  • Sony SPP-S2730 | Operating Instructions - Page 58
    Transferring a call (continued) Transferring from the base phone to the cordless handset Example: Transferring a call from the base phone to the cordless handset whose station number is 1. 1 Press (INTERCOM). The call is put on hold. 2 When the system has one cordless handset Skip this step. (
  • Sony SPP-S2730 | Operating Instructions - Page 59
    Transferring between the cordless handsets (When the system has an additional cordless handset) Example: Transferring a call from station number 1 to station number 2. 1 Press (INTERCOM). (OFF) The call is put on hold. 2 Turn Jog Dial to choose "TO HANDSET 2", and then press Jog Dial. Both
  • Sony SPP-S2730 | Operating Instructions - Page 60
    page 17). When you receive a call The phone number appears on the display as shown in the following example. If your Caller ID service includes the caller name service or if the phone number stored in the Phone Directory matches with the Caller ID data phone number, the caller's name also appears
  • Sony SPP-S2730 | Operating Instructions - Page 61
    Looking at the Caller ID list The phone stores the data of the last 70 calls received including "UNKNOWN NUMBER/NAME/CALLER" and "BLOCKED NUMBER/NAME/CALL" calls. It keeps track of all calls received; even if they were not answered. Viewing the Caller ID list You can look through the Caller ID
  • Sony SPP-S2730 | Operating Instructions - Page 62
    ID list (continued) Erasing data from the Caller ID list Old data will be erased automatically when a 71st call comes in, but you can also manually erase unnecessary data one by one or erase the entire list. To erase the phone number one by one 1 Display the phone number you want
  • Sony SPP-S2730 | Operating Instructions - Page 63
    To erase the entire list at once Entire Caller ID list deletion can only be made on the cordless handset. Note that Caller ID data in the list that has not been viewed will also be erased. 1 Press (PGM). 2 Turn Jog Dial to choose "MEMORY MANAGE", and then press Jog Dial. (GO BACK) SEND ALL DIR
  • Sony SPP-S2730 | Operating Instructions - Page 64
    Using the Caller ID list By using the Caller ID list, you can call back a phone number from the Caller ID list easily or store numbers from the Caller ID list into the Phone Directory. Calling back a number from the Caller ID list Turn Press 1 Display the phone number you want to call from the
  • Sony SPP-S2730 | Operating Instructions - Page 65
    Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 61). SMITH JOHN 1-201-123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF 2 Confirm the number and press Jog Dial. 3 Turn Jog Dial to choose "
  • Sony SPP-S2730 | Operating Instructions - Page 66
    Using the Caller ID list (continued) Notes • If the area code is not entered, "ENTER AREA CODE" will appear on the display, and you will not be able to store into the Phone Directory. Enter the area code (see page 17). • Do not allow more than 60 seconds to elapse during the operation procedure. •
  • Sony SPP-S2730 | Operating Instructions - Page 67
    When the home area code matches SMITH JOHN 123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF SMITH JOHN 1-201-123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF SMITH JOHN 1-123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF SMITH JOHN 201-123-4567 01 7.04 4:53PM NEW OLD MASSAGE RING OFF When the
  • Sony SPP-S2730 | Operating Instructions - Page 68
    though you now have a "Caller ID with call waiting" compatible phone, unless you subscribe to the combined "Caller ID with call waiting" service, you will not be able to see the name and number of the second caller. When a new call comes in while you are talking, the
  • Sony SPP-S2730 | Operating Instructions - Page 69
    . For details on the availability of this service, please ask your telephone company. If the VOICE MAIL lamp remains flashing If this lamp does not go off (e.g. When you retrieve your messages with other phones), you can go off the lamp manually. To go off the VOICE MAIL lamp 1 Press (PGM) on
  • Sony SPP-S2730 | Operating Instructions - Page 70
    ). The first time this phone receives a voice mail message, it will set itself to the FSK service and will lock out the stutter service if your telephone company is in FSK service. When you move or change your telephone company, you need to perform the following procedure. The phone will returns
  • Sony SPP-S2730 | Operating Instructions - Page 71
    Additional Information Mounting the base phone on a wall 1 Hang-up tab 2 AC power adaptor cord 3 1 Reverse the hang-up tab. 2 Plug the telephone line cord to the LINE jack and the AC power adaptor to the DC IN 9V jack, and hook the cords. Use the shorter cord for mounting. 3 Attach the wall
  • Sony SPP-S2730 | Operating Instructions - Page 72
    Carrying the cordless handset by the belt clip You can hang the cordless handset on the belt using the belt clip. Open the belt clip of the cordless handset by pressing the top of it, and then attach the cordless handset to the belt. Using the headset You can talk on the cordless handset without
  • Sony SPP-S2730 | Operating Instructions - Page 73
    Notes on power sources On battery pack • Store the battery pack at a temperature between 41°F (5°C) and 95°F (35°C) for best performance. • If you do not use the cordless handset for a long period of time, remove the battery pack after charging for more than 12 hours. On power failure During a
  • Sony SPP-S2730 | Operating Instructions - Page 74
    the cabinet. • If the charge terminals of the charger and cordless handset are soiled, wipe them with a soft cloth. If you have any questions or problems concerning your phone, please consult your nearest Sony dealer. 74US Additional Information
  • Sony SPP-S2730 | Operating Instructions - Page 75
    If you've experienced any of the following difficulties while using your phone, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. General Making calls Symptom Remedy The base phone does not operate properly. • Make sure
  • Sony SPP-S2730 | Operating Instructions - Page 76
    Troubleshooting (continued) During conversation Intercom Symptom Remedy You hear interference during conversation. • Move the cordless handset closer to the base phone. • Place the base phone away
  • Sony SPP-S2730 | Operating Instructions - Page 77
    ID Symptom Remedy The caller's name and/or phone number does not appear on the display. • Make sure you have subscribed to Caller ID service. • Caller ID service may not work when the phone is connected to a Private Branch Exchange (PBX). • The call is made through company which does not offer
  • Sony SPP-S2730 | Operating Instructions - Page 78
    Troubleshooting (continued) Power source/battery Symptom Remedy The CHARGE lamp on battery has expired and needs replacement. • Use only the supplied AC-T127 AC power adaptor. Note Should any problems persist, press RESET on the bottom of the base phone with the tip of a toothpick or some other
  • Sony SPP-S2730 | Operating Instructions - Page 79
    Specifications General Spread method Direct-Sequence Spread-Spectrum Access method FDMA-TDD Frequency band 2.4075 - 2.4720 GHz Operating channel 40 channels Dial signal Tone, 10 PPS (pulse) selectable Supplied accessories See page 10. Cordless handset Power source Rechargeable battery pack BP-T38
  • Sony SPP-S2730 | Operating Instructions - Page 80
    , 41 ringer volume 40, 41 speakerphone volume 36, 41 Area code 17 B Battery pack charging 14 duration 15 BLOCKED NUMBER/ NAME/CALL 60 C Call waiting service 33, 40 Caller ID 60 Caller ID list 61 calling back 64 memory match function 60 storing in Phone Directory 65 Caller ID with call
  • Sony SPP-S2730 | Operating Instructions - Page 81
    T Talking between the phones 54 Tone dialing dialing mode 16 switching to 33 Transferring a call 57 Troubleshooting 75 U UNKNOWN NUMBER/ NAME/CALLER 60 V VOICE MAIL 69 Volume cordless handset 33, 40 handset 36, 41 ringer 40, 41 speakerphone 36, 41 W, X, Y, Z Walkie-Talkie
  • Sony SPP-S2730 | Operating Instructions - Page 82
  • Sony SPP-S2730 | Operating Instructions - Page 83
  • Sony SPP-S2730 | Operating Instructions - Page 84
    For the customers in the USA Be sure to save the receipt and attach it to your WARRANTY card when having your equipment repaired at an authorized Sony service center. For online product registration, please contact www.sony.com/productregistration Sony Corporation Printed in Taiwan, R.O.C.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
3-232-156-
13
(1)
©2001 Sony Corporation
Operating Instructions
SPP-S2730
Cordless
Telephone
US
Hearing-Aid Compatible