Sony SRS-BTV5 Reference Guide

Wireless

Speaker System

Reference Guide

US

Guide de référence

FR

Guía de referencia

ES

SRS-BTV5

©2012 Sony Corporation

English

Before operating the system, please read this guide thoroughly and retain it

for future reference.

WARNING

To reduce the risk of fire, do not cover the ventilation opening of the

apparatus with newspapers, tablecloths, curtains, etc. Do not place

the naked flame sources such as lighted candles on the apparatus.

To reduce the risk of fire or electric shock, do not expose this

apparatus to dripping or splashing, and do not place objects filled

with liquids, such as vases, on the apparatus.

To reduce the risk of electrical shock, do not open the cabinet. Refer

servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a bookcase or

built-in cabinet.

Do not expose batteries or apparatus with battery installed to an excessive

heat such as sunshine, fire or the like.

CAUTION

You are cautioned that any changes or modifications not expressly approved

in this manual could void your authority to operate this equipment.

For customers in the USA

Customer Support Information

If you have any questions about this product, you may call; Sony Customer

Information Service Center 1-800-222-7669 or

http://www.sony.com

Declaration of Conformity

Trade Name:

SONY

Model No.:

SRS-BTV5

Responsible Party:

Sony Electronics Inc.

Address:

16530 Via Esprillo, San Diego, CA 92127 USA

Telephone No.:

858-942-2230

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

–

Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and receiver.

–

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

–

Consult the dealer or an experienced radio/TV technician for help.

The following FCC statement applies only to the version of this model

manufactured for sale in the USA. Other versions may not comply with

FCC technical regulations.

This equipment complies with FCC/IC radiation exposure limits set forth

for an uncontrolled environment and meets the FCC radio frequency (RF)

Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC

radio frequency (RF) Exposure rules. This equipment has very low levels of

RF energy that are deemed to comply without testing of specific absorption

ratio (SAR).

This equipment must not be co-located or operated in conjunction with any

other antenna or transmitter.

This Class B digital device complies with Part 15 of the FCC Rules and

Canadian ICES-003. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause

undesired operation.

Precautions

On safety



The nameplate is located on the bottom of the unit.



The mains switch is located on the bottom exterior.

Others



Before operating the system, be sure that the operating voltage of the

system is identical with that of your local power supply.



Do not set the speaker in an inclined position.



Do not leave the system in a location near heat sources, or in a place

subject to direct sunlight, excessive dust, moisture, rain or mechanical

shock.



Do not insert any small objects, etc., into the jacks or ventilation hole on

the rear of the system. The system may short out or malfunction.



Do not use alcohol, benzine, or thinner to clean the cabinet.



If you have any questions or problems concerning this unit that are not

covered in this manual, please consult your nearest Sony dealer.

On Copyrights



The

Bluetooth

®

word mark and logos are owned by the Bluetooth SIG,

Inc. and any use of such marks by Sony Corporation is under license.



The N Mark is a trademark or registered trademark of NFC Forum, Inc.

in the United States and in other countries.



Microsoft, Windows and Windows Vista are registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other

countries.



Macintosh and Mac OS are trademarks of Apple Inc., registered in the

U.S. and other countries.



Other trademarks and trade names are those of their respective owners.

What is

Bluetooth

wireless

technology?

Bluetooth

wireless technology is a short-range wireless technology that

enables wireless data communication between digital devices, such as a

computer and digital camera.

Bluetooth

wireless technology operates within

a range of about 10 m (about 30 ft).

Connecting two devices as necessary is common, but some devices can be

connected to multiple devices at the same time.

You do not need to use a cable for connection, nor is it necessary for the

devices to face one another, such is the case with infrared technology. For

example, you can use such a device in a bag or pocket.

Bluetooth

standard is an international standard supported by thousands of

companies all over the world, and employed by various companies

worldwide.

Maximum communication range

Maximum communication range may shorten under the following

conditions.

– There is an obstacle such as a person, metal, or wall between the

system and

Bluetooth

device.

– A wireless LAN device is in use near the system.

– A microwave oven is in use near the system.

– A device that generates electromagnetic radiation is in use near the

system.

Interference from other devices

Because

Bluetooth

devices and wireless LAN (IEEE802.11b/g) use the same

frequency, microwave interference may occur and resulting in

communication speed deterioration, noise, or invalid connection if the

system is used near a wireless LAN device. In such a case, perform the

following.

– Use the system at least 10 m (about 30 ft) away from the wireless LAN

device.

– If the system is used within 10 m (about 30 ft) of a wireless LAN

device, turn off the wireless LAN device.

Interference to other devices

Microwaves emitting from a

Bluetooth

device may affect the operation of

electronic medical devices. Turn off the system and other

Bluetooth

devices

in the following locations, as it may cause an accident.

– where inflammable gas is present, in a hospital, train, airplane, or a gas

station

– near automatic doors or a fire alarm

Notes



To be able to use the

Bluetooth

function, the

Bluetooth

device to be

connected requires the same profile as the system’s.

Note also that even if the same profile exists, devices may vary in

function depending on their specifications.



Due to the characteristic of

Bluetooth

wireless technology, the sound

played on the system is slightly delayed from the sound played on the

Bluetooth

device during talking on the telephone or listening to the

music.



This system supports security capabilities that comply with the

Bluetooth

standard to provide a secure connection when the

Bluetooth

wireless

technology is used, but security may not be enough depending on the

setting. Be careful when communicating using

Bluetooth

wireless

technology.



We do not take any responsibility for the leakage of information during

Bluetooth

communication.



A device featuring the

Bluetooth

function is required to conform to the

Bluetooth

standard specified by Bluetooth SIG, and be authenticated.

Even if the connected device conforms to the above mentioned

Bluetooth

standard, some devices may not be connected or work correctly,

depending on the features or specifications of the device.



Noise or sound skips may occur depending on the

Bluetooth

device

connected with the system, the communication environment or the

usage environment.

4-437-439-

13

(1)

Printed in China

For the customers in the USA and Canada

RECYCLING LITHIUM-ION BATTERIES

Lithium-Ion batteries are recyclable.

You can help preserve our environment by returning

your used rechargeable batteries to the collection and

recycling location nearest you.

For more information regarding recycling of

rechargeable batteries, call toll free 1-800-822-8837,

or visit http://www.rbrc.org/

Caution: Do not handle damaged or leaking Lithium-Ion batteries.

For the state of California, USA only

Perchlorate Material - special handling may apply, See

www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material : Lithium battery contains perchlorate

For all other batteries, please view the section on how to remove the battery

from the product safely. Hand the battery over to the applicable collection

point for the recycling of waste batteries.

For more detailed information about recycling of this product or battery,

please contact your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Specifications

Speaker section

Speaker system: 34 mm (1 3/8 in.) dia. / Impedance: 6 Ω

Amplifier section

Reference output power: 1.2 W (10% T.H.D., 1 kHz, 6 Ω) /

Input: Stereo mini jack × 1

Bluetooth

Communication System:

Bluetooth

Specification version 3.0 /

Output:

Bluetooth

Specification Power Class 2 / Maximum communication

range: Line of sight approx. 10 m (30 ft)*

1

/ Frequency band: 2.4 GHz band

(2.4000 GHz - 2.4835 GHz) / Modulation method: FHSS /

Compatible

Bluetooth

Profiles*

2

: A2DP (Advanced Audio Distribution

Profile), AVRCP (Audio Video Remote Control Profile), HFP (Hands-free

Profile), HSP (Headset Profile) / Supported Codec*

3

: SBC*

4

/

Supported content protection method: SCMS-T

*

1

The actual range will vary depending on factors such as obstacles

between devices, magnetic fields around a microwave oven, static

electricity, reception sensitivity, antenna’s performance, operating

system, software application, etc.

*

2

Bluetooth

standard profiles indicate the purpose of

Bluetooth

communication between devices.

*

3

Codec: Audio signal compression and conversion format

*

4

Subband Codec

General

Power: DC 5 V / Rated power consumption: 1.7 W / Battery life (when

using

Bluetooth

connection): Approx. 5 hours*

5

/ Charging time: Approx.

3 hours*

5

/ Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) /

Dimensions: Approx. 65 mm × 67.6 mm × 65 mm (2 5/8 in. × 2 3/4 in. ×

2 5/8 in.) (w/h/d) / Mass: Approx. 135 g (5 oz.) including the rechargeable

battery / Supplied accessories: Micro-USB cable (1), Carrying pouch (1),

Quick Start Guide (1), Reference Guide (this document) (1)

*

5

Time may vary, depending on the temperature or conditions of use.

Design and specifications are subject to change without notice.

For customers in Canada

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of

the device.

Under Industry Canada regulations, this radio transmitter may only

operate using an antenna of a type and maximum (or lesser) gain approved

for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so

chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more

than that necessary for successful communication.

This Class B digital apparatus complies with Canadian ICES-003.

This warranty is valid only in the United States.

Cette garantie ne s’applique qu’aux États-Unis.

Esta garantía sólo es válida en Estados Unidos.

Sony SRS-BTV5 Reference Guide

Sony SRS-BTV5 Manual

Sony SRS-BTV5 manual content summary: