Sony SRS-XB402M Operating Instructions

5-002-019-

11

(1)

SRS-XB402M

©2019 Sony Corporation

Printed in China / Imprimé en Chine

Wireless Speaker

Operating Instructions

Getting Started

Do not charge in places where water may splash on the unit. The supplied AC adaptor and the connectors of this unit (USB/DC IN) are neither waterproof nor dust proof.

1

Install “Sony | Music Center.”

Setup

1

Check if you have your Amazon account to use

Amazon Alexa.

To create your Amazon account, visit the Amazon website.

2

Place the unit as close as possible to a wireless LAN

router.



Establish a wireless connection from your smartphone/iPhone to the wireless LAN router.



Take a note of the SSID and the password (encryption key) of the connected wireless LAN

router.

Some of the wireless LAN routers have multiple SSIDs.

For details, refer to the operating instructions supplied with the wireless LAN router.



In advance, you must turn on the BLUETOOTH® function on the smartphone/iPhone.

3

Set up Wi-Fi® with app.



Turn on the unit.



Tap to start “Sony | Music Center” and select “SRS-XB402M.”



Follow the directions in the app to set up your unit for Wi-Fi. Set the unit to the

smartphone/iPhone’s same Wi-Fi connection.

When a Wi-Fi connection is established, the LINK indicator lights up in green.

4

Set up Amazon Alexa with app.



Select [

Settings] - [Amazon Alexa] from [SRS-XB402M] menu on

“Sony | Music Center.”



Follow the directions in the app to set up your unit for Amazon Alexa.

2

Charge the built-in battery for the first time.

*

1

Time that is required to charge the empty built-in battery to its full capacity when the unit is turned off.

*

2

If the built-in battery is fully charged when you connect the unit to an AC outlet, the CHARGE indicator lights up in orange then turns off after

about 1 minute.

00

*²

*¹

Cap

Sony Music Center

“Sony | Music Center” allows the following:

• Amazon Alexa setting

• Sound quality setting and equalizer adjustment

• Lighting setting (switching the lighting mode)

Note

On this unit, “Sony | Music Center” is available only through the Wi-Fi connection.

How to use

Alexa is Amazon’s cloud-based voice service that brings intelligent voice control to SRS-XB402M.

Talk to your Amazon Alexa.

You can ask Alexa to play music from supported streaming services or adjust unit volume

using your voice. For details of the contents that can be operated and how to talk, refer to

“Sony | Music Center.”

To use this function, you will need to connect your Amazon account to the unit.

You can start conversation simply by saying “Alexa” or by pressing and holding the



 (play)

button for about 3 seconds.

Note

• Amazon Alexa is not available in all languages and countries/regions.

• Before you use “Sony | Music Center,” make sure that a Wi-Fi connection is established.

Adjust the volume.

Spotify Connect

Lighting

Use your phone, tablet or computer as a remote control for Spotify.

Go to spotify.com/connect to learn how.

Changing the lighting mode

Each time you press the LIGHT button/

 BATTERY button, the Lighting changes in 9 modes:

RAVE, CHILL, RANDOM FLASH OFF, HOT, COOL, STROBE, CALM CYAN, CALM DAYLIGHT and OFF.

Note

This function is available only while the unit is connected through a BLUETOOTH connection or a Wi-Fi

connection.

3

Close the cap firmly.

The cap plays a very important role in maintenance of the waterproof performance.

Note

This unit may automatically update the built-in software upon completion of the Wi-Fi setup.

Please wait until the update is complete and the unit restarts before setting up Amazon Alexa.

The status indicators flash or light in blue in accordance with the progress of the update.

After the update is complete (all four indicators are lit), the unit restarts. While the update is in

progress, do not turn off the unit for any reason.