Sony STR-DA1000ES Operating Instructions (STRDA1000ES)

Sony STR-DA1000ES - Fm Stereo/fm-am Receiver Manual

Get Sony STR-DA1000ES - Fm Stereo/fm-am Receiver PDF manuals and user guides View all Sony STR-DA1000ES manuals
Add to My Manuals
Save this manual to your list of manuals

Sony STR-DA1000ES manual content summary:

  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 1
    Stereo FM/AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. STR-DA1000ES
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 2
    and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 3
    stated otherwise. Any difference in operation is clearly indicated in the text, for example, "STR-DA1000ES only". • The instructions in this manual describe the controls on the receiver. You can also use the controls on the supplied remote if they have the same or similar names as those on the
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 4
    levels and balance 23 - TEST TONE Amplifier Operation Selecting the component 24 Listening to multi channel sound .......... 24 - MULTI CH IN Listening to FM/AM radio 25 Storing FM stations automatically ........ 26 - AUTOBETICAL (Models of area code CEL, CEK only) Presetting radio stations
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 5
    5GB
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 6
    OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc. b) Model with a MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the component's internal multi-channel decoder through this receiver. c) Model equipped only with AUDIO OUT L/R jacks, etc. d) Model with component video
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 7
    components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red. • When connecting optical digital cords, insert the cord plugs straight in until they click into place. • Do not bend or tie optical digital cords. If you have Sony components with CONTROL A1II jacks
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 8
    SIGNAL FRONT GND SURR CD/SACD FM 75 R L CONTROL A1 ANTENNA SUB WOOFER CENTER MULTI CH IN ANALOG MONITOR OUT I N VIDEO 1 OUT IN VIDEO 2 OUT IN DVD R L AUDIO IN TV/ SAT VIDEO VIDEO S-VIDEO E OUTPUT DIGITAL OPTICAL A OUTPUT AUDIO OUT L R Satellite tuner * Connect to either the
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 9
    this receiver, the component video signals cannot be converted to S-video or standard video signals (or vice versa). Satellite tuner OUTPUT COMPONENT R-Y B-Y Y OUTPUT OUTPUT VIDEO S VIDEO H CD TV monitor INPUT COMPONENT R-Y B-Y Y INPUT VIDEO INPUT S VIDEO H CD DIGITAL OPTICAL
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 10
    FRONT ASSIGNABLE COAXIAL DVD SURR CD/SACD FM 75 R L CONTROL A1 ANTENNA SUB WOOFER CENTER MULTI CH IN ANALOG MONITOR OUT I N VIDEO 1 OUT IN VIDEO 2 OUT IN DVD R L AUDIO IN TV/ SAT VIDEO VIDEO S-VIDEO Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 11
    you can connect it to this receiver's MULTI CH IN jacks to enjoy the multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi channel decoder. For details on the required cords (A-H), see page 7. DIGITAL OPTICAL COMPONENT VIDEO Y DVD IN TV/ SAT IN
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 12
    video. Note On this receiver, the component video signals cannot be converted to S-video or standard video signals (or vice versa). DVD player OUTPUT COMPONENT R-Y B-Y Y OUTPUT OUTPUT VIDEO S VIDEO TV monitor INPUT COMPONENT R-Y B-Y Y INPUT VIDEO INPUT S VIDEO H CD H CD DIGITAL
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 13
    DVD U COAXIAL SIGNAL FRONT GND SURR CD/SACD FM 75 R L CONTROL A1 ANTENNA SUB WOOFER CENTER MULTI CH IN ANALOG MONITOR OUT IN VIDEO 1 OUT IN VIDEO 2 OUT IN DVD R L AUDIO IN TV/ SAT VIDEO VIDEO S-VIDEO l OUT A A IN A OUTPUT LINE L R INPUT OUTPUT LINE LINE L R CD/Super
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 14
    2 OUT IN DVD IN TV/ SAT SUB WOOFER CENTER R L CONTROL A1 ANTENNA MULTI CH IN ANALOG AUDIO VIDEO VIDEO S-VIDEO OUT IN L L L L B, D Camcorder or TV game OUT B IN B DD INPUT OUTPUT VIDEO VIDEO IN OUT INPUT S VIDEO OUTPUT S VIDEO AUDIO AUDIO IN OUT L L R R VCR 14GB
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 15
    wire antenna (supplied) DIGITAL OPTICAL COMPONENT VIDEO Y DVD IN TV/ CONTROL A1 ANTENNA SUB WOOFER CENTER MULTI CH IN ANALOG MONITOR OUT I N VIDEO 1 OUT IN VIDEO 2 OUT IN DVD R L AUDIO IN TV/ SAT VIDEO VIDEO S-VIDEO * * The shape of the connector varies depending on the area code
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 16
    format if you connect one additional surround back speaker (6.1 channel) or two surround back speakers (7.1 channel, STR-DA1000ES only) (see "Selecting the surround back decoding mode" on page 34). Example of 7.1 channel speaker system configuration Center speaker Front speaker (R) Front speaker
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 17
    Getting Started Required cords A Speaker cords (not supplied) (+) (-) STR-DA1000ES Surround speaker (L) Surround back speaker (R)* B Monaural audio cord (not supplied) Black Surround back speaker (L)* Center speaker e Ee Ee Ee E A A A A IMPEDANCE SELECTOR R + SURR - R + FRONT
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 18
    STR-DB790 Surround speaker (L) Surround back speaker Center speaker e Ee Ee E A A A IMPEDANCE SELECTOR R + SURR - R + FRONT B - + FRONT A - SPEAKERS LR + L IMPEDANCE SELECTOR - L SURROUND BACK CENTER SUB WOOFER AC OUTLET SPEAKERS FRONT B* A A A B INPUT AUDIO E E E
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 19
    configuration, shape, and number of AC outlets vary according to the model and the area code. Notes • The AC OUTLET(s) on the rear of the receiver is a switched outlet, which supplies power to the connected component only while the receiver is turned on. • Make sure that the total power consumption
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 20
    Easy Setup Guide"). • NORM. SET Select to adjust the settings of each speaker manually. x SP channel will be output from the front speakers through analog processing (analog downmix) if the front speakers are set to "LARGE". This reproduces better sound than digital processing. When the multi channel
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 21
    ) STR-DA1000ES • DUAL If you connect two surround back speakers, select "DUAL". The sound will be output to a maximum of 7.1 channels. channel, the bass redirection circuitry sends the corresponding bass frequencies to the sub woofer or other "LARGE" speakers. Getting Started However, it best
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 22
    two surround back speakers and both surround back speakers are not placed an equal distance from your listening position (STRDA1000ES only), set the distance to the closest speaker. Tip The receiver lets you to input the speaker position in terms of distance. However, it is not possible to set the
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 23
    remote or turn MASTER VOLUME -/+ on the receiver. • You can also use -/+ on the receiver for the adjustment. 4 Press TEST TONE again after adjustment. The test tone turns off. To output the test tone only from a specific NOISE" or "P.AUDIO" in the LEVEL
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 24
    or tape deck CD or Super Audio CD player Built-in tuner (FM) Built-in tuner (AM) Turntable Display VIDEO 1 or VIDEO 2 VIDEO 3 DVD TV/SAT MD/TAPE Audio CD. Also see "D.PWR." (page 39). Surround effects are not activated when using this input. STR-DA1000ES Move the easy scroll key on the remote to
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 25
    to low. The receiver stops scanning whenever a station is received. Direct tuning Enter a frequency of the station directly by using the numeric buttons on the remote. For details on the supplied remote, refer to the operating instructions supplied with the remote. 1 STR-DA1000ES: Move the easy
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 26
    stations are assigned 2character preset codes and stored after the RDS station. When done, "FINISH" appears in the display momentarily and the receiver returns to the normal operation. Notes • Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1. • If
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 27
    remote 1 STR-DA1000ES: Move the easy scroll key to select "TUNER", then press the key repeatedly to select FM or AM. STR remote to change the memory page. Using the Radio Data System (RDS) (Models of area code CEL, CEK only) This receiver services, the RDS indicator lights up and the program service
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 28
    • If a station does not provide a particular RDS service, "NO XX" (such as "NO CT") appears in the display. • When a station broadcasts radio text data, it is displayed at the same rate at which
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 29
    Amplifier Operation Changing the display Changing the information in the display You can check the sound field etc. by changing the information in the display. Press
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 30
    DIGITAL (EX): Lights up when the receiver is decoding signals recorded in the Dolby Digital format. D ; PRO LOGIC (II): Lights up when the receiver applies Pro Logic processing to 2 channel DTS (-ES): Lights up when DTS signals are input. F NEO:6: Lights up when DTS Neo:6 cinema/ music mode decoding
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 31
    to listen to in analog audio. 2 Press DIRECT on the remote. "A.DIRECT" appears in the display and the analog audio is output. Notes • This audio signal automatically In this mode, the receiver automatically detects the type of audio signal being input (Dolby Digital, DTS, standard 2 channel stereo
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 32
    stereo sound in multi channel (2 channel decoding mode) This mode lets you specify the type of decoding for 2 channel audio sources. This receiver can reproduce 2 channel sound in 5 channels through Dolby Pro Logic II; 6 channels through DTS Neo:6; or 4 channels by Sony. DCS uses the DSP (Digital
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 33
    modes CINEMA STUDIO EX modes are suitable for watching motion picture DVDs (etc.), with multi channel surround effects. You can reproduce the sound characteristics of Sony the package. - : Dolby Digital discs - : Dolby Surround encoded programs - : DTS Digital Surround encoded programs Notes •
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 34
    BACK DECODING This function lets you select the decoding mode for the surround back signals of the multi channel input stream. By decoding the surround back signal of DVD software (etc.) recorded in Dolby Digital EX, DTS-ES Matrix, DTS-ES Discrete 6.1, etc. format, you can enjoy the surround sound
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 35
    channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters. e) When two surround back speakers are connected, the output channel will be 7.1 channels (STR-DA1000ES only). f) This decoder can be used for all 6.1 formats (Dolby Digital EX, DTS-ES Matrix 6.1, DTS-ES
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 36
    audio input mode. The selected audio input mode appears in the display. Audio input modes • AUTO IN Gives priority to the analog audio signals input to the AUDIO IN (L/R) jacks when there is no digital audio signals. • COAX IN Specifies the digital audio encoded with multi channel surround effects (
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 37
    channel by +10 dB. This adjustment may be necessary when connecting a DVD player to the MULTI CH IN jacks. The sub woofer level from DVD players is 10 dB lower than Super Audio CD players. * Only when the surround back speaker is set to "SINGLE" (STR-DA1000ES if the digital input signal contains
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 38
    playing a source encoded with multi channel surround effects (DVD, etc.). 2 signals, or when DTS 96/24, DTS-ES Matrix or DTS Neo:6 decoding is applied to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE 96 XXXX DTS (DTS 96/24 decoding mode) • 96 AUTO When a DTS 96/
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 39
    Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. The initial setting is "DEC. AUTO" for VIDEO the receiver during standby mode. • PWR.S. OFF Lets you turn on the system automatically when the component connected via CONTROL
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 40
    (default for STR-DA1000ES) The distance is displayed in feet. • m (default for models for STR-DB790) The is designed specifically for implementation of the Cinema Studio EX modes. For channel surround encoded software and select the setting that provides a good sense of spaciousness and that best
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 41
    STR-DA1000ES only). x P.NOISE (Phase noise) Initial setting: OFF Lets you output the test tone sequentially from two adjacent speakers. x P.AUDIO (Phase audio) Initial setting: OFF Lets you output the front 2 channel range information included in the Dolby Digital signal. We recommend using the "MAX
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 42
    preset stations and inputs selected with INPUT SELECTOR, and display it in the receiver's display. To index a preset station 1 Rotate INPUT SELECTOR to select is registered. Note (Models of area code CEL, CEK only) When you name an RDS station and tune in the station, the Program Service (PS) name
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 43
    Other Operations Using the Sleep Timer You can set the receiver to turn off automatically at a specified time by using the remote. For details, refer to the operating instructions supplied with the remote. Press ALT, then press SLEEP on the remote while the power is on. Each time you press SLEEP,
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 44
    quality when "D.PWR." is set to "D.PWR. OFF". Recording on a video tape You can record from a VCR or a TV using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See 44GB the operating instructions of your VCR if you need help. 1 Select the program
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 45
    to the CD jacks on the amplifier (receiver). If, however, you have a Sony CD changer with VIDEO OUT jacks, set the command mode to "CD 2" and connect the changer to the VIDEO 2 jacks on the amplifier (receiver). Connections You can connect up to 10 CONTROL A1II compatible components in any order
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 46
    cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do 46GB not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer.
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 47
    receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There is no sound no matter which component is selected. • Check that both the receiver and all components are turned on. • Check that the MASTER VOLUME -/+ control
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 48
    AUTO IN" is selected for INPUT MODE, the jack flashes red when no digital audio signal is input. This is dependent on the INPUT MODE function, and is not a malfunction. Remote control The remote does not function. • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 49
    : (Models of area code U only) With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section POWER OUTPUT STR-DA1000ES: Rated Power Output at Stereo
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 50
    .2 dBf, 1 µV/75 ohms S/N Mono: 76 dB Stereo: 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz AM tuner section Tuning range STR-DA1000ES: 530 - 1,710 kHz6) (With 10-kHz
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 51
    standby mode) 1 W AC outlets Area code AC outlets U, CA 1 switched, 120 W/1A MAX SP 1 switched, 100 W MAX Dimensions Mass (Approx.) 430 × 161 × 400 mm including projecting parts and controls 14.5 kg Supplied accessories FM wire antenna (1) AM loop antenna (1) STR-DA1000ES: Remote commander
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 52
    Name of button/part Reference page Main unit ALPHABETICAL ORDER A.F.D. qd (31, 32, 33, 38) DISPLAY 7 (29) Display 5 (30) INPUT MODE 8 (36) CHANNEL DECODING indicator 6 MUSIC qa (33, 37) PHONES jack wa PRESET TUNING -/+ qj (26) SPEAKERS ws (43) SURR BACK DECODING qg (34) TUNING -/+ qh (25, 50) VIDEO
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 53
    Additional Information 12 34 56 78 9 ws waw; ql qk qj qh qg qf qd qs qa q; To remove the cover PUSH Press PUSH to remove the cover. When you remove the cover, keep the cover out of reach of the children. 53GB
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 54
    CUSTOMIZE menu 38 D Digital Cinema Sound 32 Direct tuning 25 Dubbing. See Recording E Editing. See Recording EQ menu 38 I Indexing. See Naming L Labeling. See Naming LEVEL menu 36, 41 N Naming 42 P Preset stations how to 26 how to tune 26 R RDS 27 Recording on a video tape 44 on an audio tape or MD
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 55
  • Sony STR-DA1000ES | Operating Instructions (STRDA1000ES) - Page 56
    Sony Corporation Printed in Malaysia
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
©2003 Sony Corporation
4-246-802-
16
(1)
FM Stereo
FM/AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
STR-DA1000ES
STR-DB790