Sony STR-DA6400ES Operating Instructions (Large File - 15.25 MB)
Sony STR-DA6400ES - Multi Channel Av Receiver Manual
UPC - 027242732100
View all Sony STR-DA6400ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STR-DA6400ES manual content summary:
- Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 1
Printed in Malaysia 3-875-814-11(1) Multi Channel AV Receiver Operating Instructions STR-DA6400ES ©2008 Sony Corporation - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 2
off. Excessive sound pressure from earphones (servicing) instructions in numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 3
has been dropped. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 4
About This Manual • The instructions in this manual are for model STR-DA6400ES. Check your model number by looking at the lower right corner of the front panel. • The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 5
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners. "BRAVIA" is a trademark of Sony Corporation. 5GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 6
43 6: Preparing the receiver and the remote ....44 7: Displaying the GUI menu on the TV screen 45 8: Setting the speakers 46 9: Calibrating the appropriate speaker settings automatically (Auto Calibration 48 Guide to on-screen display operation .........55 Playback Enjoying sound/images from the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 7
Adjusting Settings Using the setting menu 111 Auto Calibration 112 Speaker settings 114 Surround settings 118 EQ settings 119 Multi Zone settings 120 Audio settings 121 Video settings 123 HDMI settings 126 Network Settings 127 Quick Click settings 128 System settings 128 Operating - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 8
location of parts Front panel Status of the POWER button Off The receiver is turned off (initial setting). Press POWER to turn the receiver on. You cannot turn the receiver on using the remote. On/Standby Press ?/1 on the remote to turn the receiver on or set it to the standby mode. When you press - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 9
the input source. J 2CH/A.DIRECT Press to select sound A.F.D. MOVIE field (page 78, 79, 82, 84). MUSIC K MULTI CHANNEL DECODING lamp Lights up when multichannel audio signals are decoded. L Remote sensor Receives signals from remote commander. M PHONES jack Connects to headphones. N TUNING - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 10
optimizer microphone for the Digital Cinema Auto Calibration function (page 49). U VIDEO 2 IN/ Connect to a portable PORTABLE AV audio/video component IN jacks such as a camcorder or video game. V MENU Press to display the menu of the receiver. W RETURN Press to return to the previous - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 11
Indicators on the display Name A SW Function Lights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack. While this indicator lights up, the receiver creates a subwoofer signal based on the L.F.E. signal in the disc being played back or the low frequency - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 12
vary to show how the receiver downmixes the source sound (based on the speaker receiver recognizes a component connected via an HDMI IN jack. DMPORT The DIGITAL MEDIA PORT adapter is connected and "DMPORT" is selected. MULTI IN The multi-channel input is selected. NETWORK The input of the network - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 13
CAT PRESET MEMORY Function Lights up when auto calibration is activated. Lights up while operation in receiver is decoding DTS-HD. Lights up constantly with the one of the following indicators. DTS-HD Master Audio DTS-HD Low Bit Rate Audio DTS-HD High Resolution Audio Lights up when the receiver - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 14
indicator does not light when either the center speaker and surround speaker is not connected. Light up when DTS or DTS-ES signals are input. DTS Lights up when the receiver is decoding DTS signals. Either 96/24 or NEO:6 also lights up depending on the input signal format or decoding format - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 15
, Super Audio CD player, etc. (page 26, 29, 35, 38, 39). HDMI IN/ OUT* jacks Connect to a DVD player, Blu-ray Disc Player, or a satellite tuner. An image and the sound are output to TV or a projector (page 26, 34). B Control jacks for Sony equipment and other external components IR REMOTE IN/OUT - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 16
Used for maintenance and service. H AUDIO INPUT/OUTPUT section AUDIO IN/ OUT jacks Connect to a tape deck or MD deck, etc (page 32). MULTI CHANNEL INPUT jacks Connect to a Super Audio CD player or DVD player with an analog audio jack for 7.1 channel or 5.1 channel sound (page 31). PRE OUT - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 17
commander You can use the supplied remote to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. Main remote commander (RM-AAL012) The RM-AAL012 remote is used for illustration purpose. Name A AV ?/1 (on/ standby) B ?/1 (on/ standby) Function - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 18
TOOLS R MENU HOME Function Press SHIFT sound field for movies (page 84). Press to select sound receiver, DVD player, TV, or Blu-ray Disc Player, etc. Press to display the menu used to operate audio remote (page 108). W THEATER Press to turn the Theater mode on and off when connecting the receiver - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 19
numbers over 10 of the TV, Satellite tuner or the VCR. wk A.F.D. Press to select sound field (page 79). wl 2CH/ A.DIRECT Press to select sound field or to switch the audio window. es DISPLAY Press to display the current status of or information on components connected to the receiver. Note In - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 20
on or off the audio/ video components that the remote is assigned to operate (page 137). Press ?/1 (2) at the same time, to turn off the receivers in the main zone, zone 2 and zone 3, and any other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 21
receiver, DVD player, TV, or Blu-ray Disc Player, etc. L MENU HOME Press to display the menu used to operate audio changes the remote button function to or on-screen guide of the VCR a disc when using a multi-disc changer. Z MASTER VOL sound temporarily. Press the button again to restore the sound - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 22
Getting Started 1: Installing speakers This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Enjoying a 5.1/7.1 channel system To fully enjoy theater-like multi-channel surround sound requires five speakers (two front speakers, a center speaker, and two surround - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 23
Getting Started Tips • The angle A should be the same. • When you connect a 6.1 channel speaker system, place the surround back speaker behind the seating position. • Since the subwoofer does not emit highly directional signals, you can place it wherever you want. 23GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 24
connecting cords, make sure to disconnect the AC power cord (mains lead). H G F E B B FRONT SPEAKERS B terminals a) A B B D C B A A Monaural audio cord (not supplied) B Speaker cords (not supplied) AFront speaker A (L) BFront speaker A (R) CCenter speaker DSubwooferb) ESurround back - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 25
to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output. c) If you connect only one surround back speaker, connect it the Speaker settings menu. See "Using Multi-zone Features" (page 88) for details on connection and operation in zone 2. 25GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 26
or MONITOR OUT jacks to a TV. You can operate this receiver using a GUI (Graphical User Interface). It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. Audio signals TV monitor Video signals A B C D E A Optical digital cord - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 27
, even if you connect recording components. • Turn on the receiver when the video and audio of a playback component are being output to a TV via the receiver. If the power supply of the receiver is not turned on, neither video nor audio is transmitted. • Depending on the status of the connection - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 28
the audio components How to hook up your components This section describes how to hook up your components to this receiver. Audio CD player/ CD player With digital audio output With multi-channel audio output With analog audio output only MD player With digital audio output With analog audio - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 29
jack. - Remove the DIGITAL MEDIA PORT adapter by squeezing the sides of the connector, since the connector is locked in place. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz sampling frequencies. continued 29GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 30
Audio CD player • No sound is output when playing a Super Audio CD on a Super Audio CD player connected to only the COAXIAL SA-CD/ CD IN jack on this receiver. When you play a Super Audio CD, connect the player to the MULTI CHANNEL INPUT or SA-CD/CD IN jacks. Refer to the operating instructions - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 31
jacks If your DVD player, Blu-ray Disc Player or Super Audio CD player is equipped with multi-channel output jacks, you can connect them to the MULTI CHANNEL INPUT jacks of this receiver to enjoy multi-channel sound. Alternatively, the multi-channel input jacks can be used to connect an external - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 32
CD, CD player, MD deck, tape deck and turntable, etc. MD deck Tape deck A A A A Turntable A Audio cord (not supplied) Super Audio CD player, CD player Notes • If your turntable has a ground (earth) wire, connect it to the (U) SIGNAL GND terminal. • Before connecting cords, make sure to - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 33
Getting Started 4b: Connecting the video components How to hook up your components This section describes how to hook up your components to this receiver. Before you begin, refer to "Component to be connected" below for the pages which describe how to connect each component. After hooking up all - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 34
Audio (DTS-HD Master Audio, Dolby TrueHD), Deep Color and xvYCC transmission, extended by HDMI ver1.3. • The HDMI jacks of this receiver support the Control for HDMI function. The HDMI OUT B jack, however, does not support the Control for HDMI function. • HDMI IN 4 is input which is considered sound - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 35
, PS3™, hard disk recorder Audio/video signals A A B Audio signals C Audio/ video signals A A Audio/ video signals TV monitor, projector, etc. A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. B Optical digital cord (not supplied) C Audio cord (not supplied) Projector - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 36
A Audio/video signals Camcorder A HDMI cable (not supplied) We recommend that you use a Sony HDMI cable. To enjoy TV multi channel surround sound broadcasting You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 37
setup of the connected component if an image is poor or the sound does not come out of a component connected via the HDMI cable. • Sound may be interrupted when the sampling frequency, the number of channels or audio format of audio output signals from the playback component is switched. • When the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 38
Video cord (not supplied) E Component video cord (not supplied) Notes • To output multi-channel digital audio, set the digital audio output setting on the DVD player, Blu-ray Disc Player. Refer to the operating instructions supplied with the DVD player, Blu-ray Disc Player. • Before connecting cords - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 39
illustration shows how to connect a satellite tuner, Set-top box. It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. Audio signals Satellite tuner, Set-top box Video signals A B C D A Optical digital cord (not supplied - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 40
which has analog jacks such as a DVD recorder or VCR, etc. It is not necessary to connect all the cables. Connect audio and video cords according to the jacks of your components. Audio signals DVD recorder, VCR Video signals A B A Audio cord (not supplied) B Video cord (not supplied) 40GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 41
Started To the VIDEO 2 IN/ PORTABLE AV IN jacks C Camcorder, video game C Audio/video cord (not supplied) Note Before connecting cords, make sure to disconnect the AC power cord (mains lead). Function for conversion of video signals This receiver is equipped with a function for converting - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 42
VIDEO MONITOR OUT jacks when both are connected. To display Closed Caption Set "Resolution" to "DIRECT" in the Video settings menu when receiving a signal that supports Closed Captions. Use the same kind of cords for the input/output signals. Note Closed Caption is not displayed in zone 2. To - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 43
) * The shape of the connector varies depending on the area. Notes • To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other components. • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 44
receiver and the remote Connecting the AC power cord (mains lead) Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver, to the receiver's AC OUTLET(s) does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 45
from battery leakage and corrosion. • When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 137). Tip When the remote no longer operates the receiver, replace all the batteries with new ones. 7: Displaying the GUI menu on - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 46
Set the appropriate speaker impedance for the speakers you are using. AMP The receiver menu is displayed on the TV screen. Tip You can select the language to MENU. V/v/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 46GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 47
," then press . To exit the menu Press MENU. Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 48
you perform the auto calibration, set up and connect the speakers (page 22-25). • The AUTO CAL MIC jack is used for the supplied optimizer microphone only. Do not connect other microphones. Doing so may damage the receiver and the microphone. • During the measurement, the sound that comes out of - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 49
will be no problems even if you continue to use the receiver with that value. Performing auto calibration The auto calibration function allows you the multi-channel input is selected. The correction is invalid for other speakers. b) The measurement result is not utilized when the multi-channel - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 50
or b. The Settings menu list appears on the TV screen. AMP 4 Press V/v repeatedly to select "Auto Calibration," then press or b. V/v/B/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 5 Press V/v repeatedly to select "Quick - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 51
to select "Start." The measurement starts in five seconds. When the measurement ends, a beep sounds and the measurement result appears on the TV screen. 8 Press to select "Next." "Save auto calibration (auto speaker setup)?" appears. To save the measurement results, follow the steps in "Saving the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 52
Sony listening room standard. Front Reference Adjusts the characteristics of all the speakers to match the characteristics of the front speaker. OFF Sets the auto calibration in the following cases. - The multi-channel input is selected. - "2ch than 96 kHz are being received. Tip The size of a - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 53
calibration" (page 49), check the problem of the error and perform auto calibration again. 1 Press B/b to select "Yes," then press when "Error occurred during calibration It may be that the volume is too big when you use the receiver as a preamp. The distance and position of a subwoofer cannot be - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 54
information. ---------- No speakers are connected. Tip Depending on the position of the subwoofer, the measurement results for polarity may vary. However, there will be no problems even if you continue to use the receiver with that value. 54GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 55
Getting Started Guide to on-screen display operation You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote. To display the menu of the receiver on the TV screen, make sure that the receiver is in - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 56
or server on the home network. Rhapsody Selects the Rhapsody radio service. Refer to the "Using Network Features" supplied with these operating instructions. SHOUTcast Selects the SHOUTcast radio service. Refer to the "Using Network Features" supplied with these operating instructions. FM/AM/XM - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 57
Getting Started 5 Press V/v repeatedly to select the option menu item you want, then press . 6 Press V/v repeatedly to select the parameter you want, then press . To exit the menu Press MENU. 57GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 58
sound/images from the component connected to the receiver Refer to "Using Network Features" supplied with these operating instructions for details on playing back content on your home network. AMP MASTER VOL MUTING V/v/B/b, OPTIONS MENU 1 Press AMP. The receiver can be operated using the remote - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 59
remote. To cancel, press MUTING on the remote again or press MASTER VOL + to raise the volume. To avoid damaging your speakers Before you turn off the receiver Input name and audio/video input jack assigned to the input are displayed in a list. • Sound Field Input name and the sound field selected - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 60
not connect to the receiver a DIGITAL MEDIA PORT adapter that uses a network function such as TDM-NC1 Wireless Network Audio Client. You can use the network function of the receiver without using a DIGITAL MEDIA PORT adapter. Refer to "Using Network Features" supplied with this manual for details of - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 61
Playback AMP V/v/b, MENU MASTER VOL 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 the following is connected. iPod The iPod model recognized is connected. Walkman The Network Walkman recognized is connected. Bluetooth The - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 62
selected in step 4 in "Changing the operation screen using the DIGITAL MEDIA PORT" (page 63). AMP V/v/b, OPTIONS MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " Music" or " Video," then press or - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 63
audio file was found. Loading The data is being read. No Item No item was found. Changing the operation screen using the DIGITAL MEDIA PORT You can change the operation screen using the GUI menu. The DMPORT Control mode is supported , see the operating instructions supplied with component for - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 64
the operation screen using the DIGITAL MEDIA PORT" (page 63). For details on operating the adapter using the adapter GUI menu, refer to the operating instructions supplied with the adapter you are using. To operate the TDM-iP1/iP50 using the iPod menu Make sure that "iPod" is selected in step - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 65
Refer to "Using Network Features" supplied with these operating instructions for details on listening to the Internet radio. You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the receiver (page 43 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 66
Tuning into a station directly (Direct Tuning) Enter the frequency of a station directly by using the numeric buttons. 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " FM" or " AM," then press or b. 4 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 67
to. 4 Press V/v to select a preset number, then press . The station is stored as the selected preset number. 5 Repeat steps 1 to 4 to preset ," then press . Tuning to preset stations 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 68
Radio by connecting a satellite tuner, not supplied, to the receiver. XM Radio service About XM Radio XM is North America's number one satellite radio company, offering an extraordinary variety of commercial-free music, plus the best in premier sports, news, talk radio, comedy, children's and - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 69
to your Sirius Ready home audio system. You are then ready to activate and subscribe to Sirius by either calling 1.888.539.SIRIUS (7474) or log on to sirius.com (US), siriuscanada.ca (Canada). It is that easy. SIRIUS Satellite Radio service SIRIUS Satellite Radio: The Best Radio On Radio SIRIUS - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 70
locations around your home to see where the best reception will be received. Most XM Home tuner, antenna, and AC power adaptor away from the speaker cords and the power cord to avoid picking up noise. OPTIONS MENU Checking the ID number 1 Press AMP. The receiver can be operated using the remote - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 71
of the reception, adjust the direction of the antenna to obtain the best reception. To exit the menu Press MENU. Checking receiving conditions (Antenna Aiming) 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 72
. This is because one channel may belong to more than one category. Selecting a channel by inputting the channel number directly (Direct Tuning) 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " XM" or - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 73
selected channel is tune in. Presetting satellite radio channels You can select the channels you want directly by presetting them using the preset numbers. You can preset up to 30 XM Radio channels and 30 SIRIUS Satellite Radio channels. AMP Tuning V/v/b, OPTIONS MENU 1 Select a channel you want - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 74
number you want to use as the preset channel, then press . Preset channels from 1 to 30 are available, and a default channel is preset for all the preset channels when you purchase the receiver preset channels 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 75
channel has been locked." appears and the Parental Lock is set. To delete the numbers you have entered, go back to step 2 by pressing RETURN/ EXIT O, and a channel using Category Mode, locked channels are skipped. • When the receiver is reset to the factory settings, the lock code returns to the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 76
Home tuner is connected to a wall socket. Invalid Channel You have entered an invalid channel number. The channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. Locked The selected channel is locked. - Channel Subscription Updated - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 77
satellites or the antenna is not properly position (page 71). aimed. See instructions supplied with the XM Mini-Tuner and Home Dock for antenna installation information. Loading The XM Mini-Tuner is acquiring audio This message should disappear in a few seconds in or program information from - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 78
Direct Effect The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer. Standard 2 channel stereo sources completely bypass the sound field processing and multi-channel surround formats are downmixed to 2 channel. You can switch the audio of the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 79
MENU Press A.F.D. repeatedly to select the A.F.D. mode you want. A.F.D. mode A.F.D. Auto Multi Stereo Enhanced Surround Multi-channel audio after decoding (Detecting automatically) (Multi Stereo) - Effect Presets the sound as it was recorded/encoded without adding any surround effects. Outputs - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 80
Setting a multi-channel surround sound effect 1 Start playing a sound source you want to listen to (CD, DVD, etc.). 2 Press AMP. The receiver can be operated using the remote. 3 Press MENU. The menu is displayed on the TV screen. 4 Press V/v repeatedly to select " Settings," then press or b. The - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 81
• This function does not work when Dolby TrueHD signals with a sampling frequency of higher than 96 kHz are being received. • If you set up the sound field effect while the receiver is receiving signals with a sampling frequency of higher than 48 kHz, the signals will always be played back at either - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 82
the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of concert halls into your home. MUSIC Press MUSIC repeatedly to select the surround effect you want for music. Sound field D.Concert Hall A D.Concert Hall B Jazz Club Live Concert Stadium Sports Portable Audio - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 83
MUSIC Press 2CH/A.DIRECT or A.F.D. Notes • The sound fields for music do not work when the multi-channel input is selected. • The sound fields for music do not work when DTSHD signals with a sampling frequency of higher than 48 kHz are being received. • The sound fields for music do not work when - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 84
receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters into your home. MOVIE Press MOVIE repeatedly to select the surround effect you want for movies. Sound field Cinema Studio EX A DCS Cinema Studio EX B DCS Cinema Studio EX C DCS V.Multi Dimension - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 85
fields for movies do not work when the multi-channel input is selected. • The sound fields for movies do not work when DTS-HD signals with a sampling frequency of higher than 48 kHz are being received. • The sound fields for movies do not work when Dolby TrueHD signals with a sampling frequency - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 86
audio formats supported by the receiver Digital audio formats that this receiver can decode depend on digital audio input jacks for the components connected. This receiver supports the following audio formats. Audio format Connection of the playback component and Maximum number the receiver - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 87
component and Maximum number the receiver of channels COAXIAL/OPTICAL HDMI 5.1ch × a Multi channel Linear PCM a) 7.1ch × a a)Audio signals are output in another format if the playback component does not correspond to the format. For details, refer to the operating instructions of the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 88
the Multi-zone function You can enjoy images and sounds from a component connected to the receiver in Sony receiver in zone 2 or zone 3 from zone 2 or zone 3. To operate the receiver from zone 2 or zone 3 You can operate the receiver without pointing the remote toward the IR repeater of the receiver - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 89
B Using Multi-zone Features SURROUND BACK SPEAKERS RM-AAP026 2 Outputs sound from speakers in zone 2 using the receiver and another amplifier. Main zone Zone 2 B TV B monitor IR REMOTE IN ZONE 2 VIDEO OUT* STR-DA6400ES C A ZONE 2 AUDIO OUT A IR repeater (not supplied) B Speakers C Sony - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 90
2:Zone 3 connections Main room IR REMOTE IN STR-DA6400ES ZONE 3 AUDIO OUT A IR repeater (not supplied) B Speakers C Sony Amplifier/Receiver Zone 3 B B C A RM-AAP026 90GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 91
illustration below. Component Video Balun CAV-CVB1 Zone 2 CAT5 cable Component video cable TV monitor Using Multi-zone Features ZONE 2 VIDEO OUT (RJ45 jack) Note CAV-CVB1 (Component Video Balun) must be used. Other types will cause trouble and - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 92
is correct. Use Category 5e or Category 6 cable. RJ45 connector CAT5 cable RJ45 connector Wire color White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown White/Orange Orange White/Green Blue White/Blue - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 93
to the SURROUND BACK SPEAKERS terminals of the receiver (page 89), make the setting so that the sound selected in zone 2 is output from the the menu Press MENU. Using Multi-zone Features RETURN/ EXIT O V/v/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 94
to be used in zone 2. If you want to use them in zone 3, switch the zone setting of the remote. Main remote ?/1 RM SET UP AMP SHIFT ZONE 2, 3 ENT/ MEM Zone 2/Zone 3 remote RM SET UP ?/1 SHIFT 2, 3 3 Press the numeric button 2 for the zone 2, or 3 for the zone 3 while the ZONE button - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 95
OUT jack. 8 Adjust to a suitable volume. • In the case of illustration 1-1 (page 89), adjust the volume using MASTER VOL +/- on the remote. • In the case of illustration 1-2 (page 89), adjust the volume using the receiver in zone 2. To finish the zone 2 operation Press ?/1 after pressing ZONE. 95GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 96
receiver is standby mode (press ?/1 on the remote to turned off this receiver), the receiver in zone 2 or zone 3 remains turned on. To turn off all receivers, press ?/1 and AV ?/1 on the main remote OUT jacks even when the multi-channel input is selected. The analog audio signals of the current - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 97
Using Multi-zone Features 4 Press B to select "Start," then press . The same sound of the input selected in main zone is output in the zone selected in party mode (page 121). To exit the party mode Select other input in zone 2 or zone 3. Refer to "Operating the receiver from another zone (ZONE 2/ - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 98
Sony TV, Blu-ray Disc/DVD player, AV amplifier, etc., that is equipped with the Control for HDMI function. By connecting Sony receiver and the TV are turned on automatically and switch to the appropriate HDMI input. • System Audio Control: While watching TV, you can select to output the sound - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 99
such as One-Touch Play or System Audio Control. • When you set up the receiver using the "Control for HDMI-Easy Setting" from a TV, turn for HDMI-Easy Setting" function" (page 98). 2 Press AMP. The receiver can be operated using the remote. 3 Press MENU. The menu is displayed on the TV screen. 4 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 100
the sound is being output from the TV speaker. • You can adjust the receiver's volume when you adjust the TV volume. You can also operate this function using the TV menu. For details, see the operating instructions of the TV. Notes • When "Control for HDMI" is set to "ON," the "Audio Out" settings - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 101
TV's remote, the receiver and the connected components turn off automatically. You can also use the receiver's remote to turn off the TV. AV ?/1 turned off. For details, see the operating instructions of the connected components. HDMI OUTPUT 1 Turn on the receiver and the two monitors. 2 Press HDMI - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 102
receiver. 2 Press AMP. 3 Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears on the TV screen. • Auto Gives priority to digital audio the audio input mode. • When "2ch Analog Direct" is being used, or the multi-channel input is selected, audio input is - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 103
want to input the video signals from the DVD player. Assign video and/or audio signals to the DVD input jack using "Input Assign" in the Input menu. AMP 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 104
VIDEO1 VIDEO2 BD DVD SAT TAPE MD SA-CD/ MULTI HDMI1 HDMI2 HDMI3 HDMI4 HDMI5 HDMI6 CD IN Assignable setting b)When you assign a component video input to the HDMI input via the Input Assign menu, component video signals are not converted to HDMI the receiver. • When you assign the digital audio input - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 105
automatically at a specified time. AMP When sleep timer is being used, "SLEEP" lights up in the display window of the receiver. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 106
theater like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level. AMP 4 Press V/v repeatedly to select "Audio receiver can be operated using the remote. - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 107
a MiniDisc or audio tape You can record onto a MiniDisc or audio tape using the receiver. See the operating instructions supplied with your The audio input signals from the MULTI CHANNEL INPUT jacks are not output. To record digital sound Connect a component for playback to the digital audio input - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 108
from the digital output jack (for recording). • HDMI sound cannot be recorded. Switching the command mode of the receiver and the remote You can switch the command mode (COMMAND MODE AV 1 or COMMAND MODE AV 2) of the receiver and the remote. Switch the command mode from the initial setting to the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 109
When you press 1, the command mode is set to AV SYSTEM 1. When you press 2, the command mode is set to AV SYSTEM 2. The AMP button lights up. 4 Press ENT so may cause a malfunction of the receiver. To set up speakers 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 110
• You cannot use the FRONT SPEAKERS B terminals for a bi-amplifier connection. • When you use the auto calibration function, make the bi-amplifier settings before you perform auto calibration. • If you make the bi-amplifier settings, the speaker level, balance, and equalizer settings of the surround - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 111
surround effects, multi zone, etc. using the setting menu. To display the menu of the receiver on the TV screen, make sure that the receiver is in " enter. Example: When you select "Auto Calibration" OPTIONS MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 112
for sound/ images from components connected to the HDMI jacks (page 126). Makes the settings for the network (page 127). Controls components connected to the receiver using the on-screen remote (page 128). Sets the screen saver or language of the menu guide display (page 128). Auto Calibration - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 113
speaker compensation type, then press . 2 Press V/v repeatedly to select "Calibration Type" you want, then press . • Full Flat Makes the measurement speaker flat. • Engineer Sets the frequency to match that of the Sony listening room standard. • Front Reference Adjusts the characteristics of all the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 114
audio with high quality sound when receiver when you want to change the connection from a bi-amplifier connection or a zone 2 connection to a surround back speakers connection. Re-set up the speakers after you connect the surround back speakers. Refer to "Auto Calibration" (page 48) or "Manual - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 115
can adjust each speaker manually on the Manual Setup screen. You can also adjust the speaker levels after the auto calibration is completed. To or surround speakers are set to "SMALL," the sound field for movie is selected, or "Portable Audio" is selected. To adjust the distance from the seating - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 116
" speakers. However, since bass sound has a certain amount of directionality, it is best not to cut it, if calibration. 1 Press B/b to select the speaker on the screen you want to adjust. 2 Press V/v to adjust the value, then press b. 116GB Test Tone You can select the test tone type on the Test - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 117
Audio screen appears. 2 Press V/v to adjust the parameter, then press . • OFF • L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/ SL, SL/L, L/SR Lets you output front 2 channel source sound (instead of the test may have the short-circuit problem. When a test tone is output from - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 118
of measure for setting distances. x meter The distance is displayed in meters. x feet The distance is displayed in feet. Surround settings You can adjust the sound effect on the Sound Field Setup screen. Note The setup items you can adjust on each menu vary depending on the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 119
cases. - The multi-channel input is selected. - Sound Field is set to "2ch Analog Direct." • This function does not work when Dolby TrueHD signals with a sampling frequency of higher than 96 kHz are being received. • If the equalizer is adjusted while the receiver is receiving - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 120
can select the source that is output to the zone. Audio and video signals are output to zone 2, while only audio signals are output to zone 3. 1 Press V/v to the main receiver is turned on. x CTRL Lets you turn the output of 12V triggers on or off manually using the CIS command of the IR remote. x - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 121
you set this setting to "AUTO," the receiver plays back the sound recorded using lossy compression with high quality sound. Even the CD sound will be linearized so that the CD sound quality level will be increased. x OFF x AUTO A/V Sync (Synchronizes audio and video output) Lets you delay the output - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 122
theater-like environment at low volume levels. This function can be used with other sound fields. When watching a movie late at night, you will be able to hear the dialog clearly even at a low volume level. x ON x OFF Decode Priority (Digital audio in any other format are received, set this item to - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 123
Video settings Makes settings for video. Resolution (Converting video signals) Lets you convert the resolution of analog video input signals. For details on video input/output conversion classified according to the Resolution menu settings, see Figure 1 on page 124. x AUTO x DIRECT Lets you output - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 124
or MONITOR VIDEO OUT jacks when the monitor, etc., is connected to HDMI OUT jacks. • If you select a resolution that the connected TV does not support in the "Resolution" menu, the images from the TV cannot be output correctly. • Converted HDMI image output signals do not - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 125
from ZONE 2 COMPONENT VIDEO OUT jacks Input signals ZONE 2 VIDEO OUT jack ZONE 2 COMPONENT VIDEO OUT (CAT5 RJ45) jack Component video z z z Composite video z z z Component video z - z Composite video z - z Component video z - z Composite video z - z z : Video signals - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 126
HDMI audio signals output from the playback component connected to the receiver via an HDMI connection. x TV+AMP The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV's sound quality, such as the number - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 127
instructions for details. Server Function Setup Lets you activate the server function of the receiver. x OFF x ON Network Setup Lets you make the network settings. x Network Information x Network Setup x Proxy Setup x Cancel Network Setup Rhapsody Account Lets you enter the Rhapsody Account number - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 128
Mode Customizes the remote to match the source components connected to your receiver. x Learn Mode Allows the remote learn codes. ais x Deutsch System Update Lets you upgrade the firmware of the receiver. Refer to "Using Network Features" supplied with these operating instructions for details. 128GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 129
, press GUI MODE to switch the display mode of the menu to "DISPLAY MODE." 1 Turn on the receiver. 2 Press AMP. The receiver can be operated using the remote. 6 Press V/v repeatedly to select the parameter you want, then press . The parameter is entered and the brackets disappear from the display - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 130
Item Parameter Initial setting Auto Calibration AUTO CAL START? 5 POS.2, POS.3 POS.1 NAME IN ? [xxxxxxxx] Level Settings TEST TONE [xxxxxxxx] OFF, L to SW (AUTO), L to R/SR, SR/SL, OFF SR/SBR, SBR/SBL, SBL/SL, SL/L, L/SR PHASE AUDIO [xxxxxxx] OFF, L/C, C/R, R/SL, R/SR, SR/SL, OFF SR/SBR, SBR - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 131
Menu Item Parameter Speaker Settings SP PATTERN [xxxxx] 2/0 to 3/4.1 (16 patterns) FRONT SP [xxxxx] SMALL, LARGE CENTER SP [xxxxx] SMALL, LARGE SURROUND SP [xxxxx] SMALL, LARGE BI-AMP [xxx] OFF, ON ZONE2 SP [xxx] OFF, ON FRONT L [xxxxxxxxx] FRONT R [xxxxxxxxx] CENTER [xxxxxxxxx] - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 132
Menu Sur Settings EQ Settings Tuner Settings Audio Settings Video Settings Item Parameter SOUND FIELD SELECT ? Sound Filed [xxxxxxxxxxxxxxx xxx] ENHANCED SUR SELECT? PLII, PLIIx, Neo:6 Cinema, Neo:6 [xxxxxxxxxxxxxxx Music, NEURAL-THX xxx] EFFECT LEVEL [xxx%] 50, 80, 100, 150% FRONT BASS [ - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 133
FOR HDMI [xxx] OFF, ON AUDIO OUT [xxxxxx] TV+AMP, AMP SW check the sound field, etc., by changing the information on the display. 1 Press AMP. The receiver can be operated using the remote. 2 number t Category t Artist name t Song title t Composer name (SIRIUS only) t Signal strength t Sound - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 134
you are using with the remote supplied with the receiver. The remote is initially set to control Sony components. When you change the settings of the remote according to the components you are using, you can control non-Sony and other Sony components that the remote is initially unable control (page - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 135
remote commander) Component TV VCR DVD Blu-ray HDD PSX Video CD Digital DSS Tape deck DAT CD DIGITAL player, Disc Recorder player, LD CATV A/B deck player, MEDIA DVD/VHS Player player terminal MD deck PORT Button combo device AV V/v/B/b, , zz z z zz MENU, HOME ./> zz z z zz z zz - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 136
3 remote commander , MEDIA DVD/VHS Player player terminal MD deck PORT Button combo device AV ?/1 zz z z zz z zz zz Numeric buttons zz z z zz z RETURN/EXIT z z z zz z zz z V/v/B/b, , zz z z zz MENU, HOME ./> zz z z zz z zz z z z*2 z z z B·/·b z z z zz z - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 137
Sony is connected to the VIDEO 2 IN jacks on the receiver. Main remote RM SET UP AV ?/1 SHIFT Numeric buttons Input buttons ENT/ MEM Zone 2/Zone 3 remote RM SET UP SHIFT Numeric buttons AV input button lights up. Note For a TV remote code value, only numbers in the 500's are valid. 4 Press ENT - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 138
the component Use the numeric codes in the tables below to control non-Sony components and also Sony components that the remote is normally unable to control. Since the remote signal that a component accepts differs depending on the model and year of the component, more than one numeric code may be - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 139
534, 556 To control an LD player Maker SONY PIONEER Code(s) 601, 602, 603 606 To control a video CD player Maker SONY Code(s) 605 To control a VCR Maker SONY AIWA* AKAI BLAUPUNKT EMERSON FISHER GENERAL ELECTRIC (GE , 730 723, 753 724 722, 725, 729, 741 717 continued 139GB Using the Remote - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 140
instead. To control a satellite tuner (box) Maker SONY AMSTRAD BskyB GENERAL ELECTRIC(GE) GRUNDING HUMAX THOMSON PACE PANASONIC PHILIPS NOKIA RCA/PROSCAN HITACHI/BITA HUGHES JVC/Echostar/Dish Network MITSUBISHI SAMSUNG TOSHIBA Code(s) 801, 802, 803, 804, 824, 825, 865 845, 846 862 866 859, 860 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 141
When setting up Macro Play, replace the batteries with new ones. Program the sequence of the operation RM SET UP Input buttons Using the Remote N, x, X, M, m, ., > MACRO 1 MACRO 2 1 Press MACRO 1 or MACRO 2 for more than 1 second while pressing RM SET UP. The RM SET UP button flashes and one of - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 142
3 Press the buttons you want to program in the same sequence as you want the operation(s) to be performed. Press Operations to be programmed N, x, X, M, m, ., > Performs the operation of the button. The input Switches inputs. button for more than 1 second MACRO 1 or MACRO 2 Make a one - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 143
is not one of the presets stored in the remote, it is possible for the remote to learn the code using the learning function. Note When setting up the receiver to learn the remote command modes, replace the batteries with new ones. THEATER RM SET UP SHIFT Numeric buttons Input buttons Example - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 144
the button used to learn that function. To erase the learned code 1 Press THEATER while pressing RM SET UP. 2 Press the input button (VIDEO2 in the example the contents of the remote's memory AV ?/1 ?/1 MASTER VOL 1 Press and hold MASTER VOL - first, then press ?/1, then press AV ?/1. The RM SET UP - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 145
) Operating components or lighting connected to the receiver using the on screen remote (Quick Click) You can control components connected to the receiver, a projector, and the light control unit using the on-screen remote on the TV screen. On-Screen remote (Quick Click) IR Blaster Common Components - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 146
. Connect the IR Blaster according to following instructions. Connecting the IR Blaster Attach the supplied IR Blaster to components connected to the receiver. You can control components connected to the receiver via the IR Blaster using the on-screen remote control. Note Do not remove the backing - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 147
not be able to operate some functions for the components you are using. Using On-screen Remote (Quick Click) QUICK CLICK V/v/B/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " Input," then - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 148
Table of buttons used to control each component (Quick Click) Refer to "Operating the components connected to the receiver" for details on the buttons of the onscreen remote. Category TV VCR PROJECTOR BD/DVD LD CD MD CABLE SAT TAPE DVR LIGHT Button 1 zz z zzzzzzzzz Numeric buttons zz - - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 149
Player, etc or display the program guide of a TV, satellite tuner or hard disk recorder, etc. J Input Select the input source of the components connected to the receiver. K Macro Select to start a macro programmed with Quick Click. Using On-screen Remote (Quick Click) Button A1 B Display (Info - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 150
key tab Button A1 B 10 key C +10 (.) D Ent Function Select to turn components connected to the receiver on or off. Select to - select track numbers of the CD player, DVD player, Bluray Disc Player, or MD deck. - select channel numbers of the TV, Satellite tuner or the VCR. Select to - select track - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 151
to exit the menu. Select to display the program guide of a TV, satellite tuner, hard disk recorder, etc. Select the input source of the components connected to the receiver. To operate the projector, select ( ) on Common tab Using On-screen Remote (Quick Click) Button A Macro B1 C 10 key D +10 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 152
menu of components connected to the receiver. Select to exit the menu. Select the input source of the components connected to the receiver. To operate the lighting, lighting control unit installation. To make the on-screen remote disappear Press QUICK CLICK or RETURN/EXIT O. Button Function - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 153
the onscreen remote AMP V/v/B/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 code, then press . If you want to have a test, select "Play" on the TV screen. 11Press V/v/B/b repeatedly maker list of the corresponding component TV SONY ADMIRAL ADVENTURA AKAI ANAM APEX AUDINAC - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 154
TEKNICA TOSHIBA UNIVERSAL VIEWSONIC VISCO WARDS ZENITH Projector SONY MITSUBISHI OPTOMA SHARP EPSON OLYMPUS RUNCO VCR SONY AIWA AUDIO DYNAMICS BROKSONIC CCE CINEVISION CRAIG DAEWOO DIMENSIA FISHER REALISTIC SANSUI SCOTT SEMP TOSHIBA SHARP SIGNATURE 2000 SYLVANIA TASHIRO TEAC TOSHIBA YAMAHA 154GB - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 155
player SONY AIWA BROKSONIC CLASSIC CYBER HOME DENON FUNAI GPX HITACHI ILO JVC KLH KRELL LITE-ON MARANTZ NORCENT TECHNOLOGY OPTOMA ORITRON PHILIPS RCA SANSUI SHARP SYLVANIA TEAC THOMSON YAMAHA ADVENT TOSHIBA VIDEOTRON WIDEOPENWEST ZENITH continued 155GB Using On-screen Remote (Quick Click) - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 156
Recorder SONY LG PHILIPS REPLAYTV TOSHIBA HUMAX PANASONIC PIONEER TIVO Performing several commands in sequence automatically with Quick Click (Macro Play) You can use the macro function easily with Quick Click. AMP V/v/B/b, MENU 1 Press AMP. The receiver can be operated using the remote. 2 Press - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 157
list appears on the TV screen. 4 Press V/v to select the macro number you want to start. The macro starts and executes the commands in the order you assigned them. To input a macro name 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 158
press . To erase a programmed macro 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV 6 Press V/v repeatedly to select the macro number you want, then press . 7 Press V/v repeatedly to select the step number you want, then press . 8 Press - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 159
press . 8 Press V/v repeatedly to select the code number you want to store as the new command, then press . 9 Keep pressing the corresponding button on the remote of the component to be programmed while pointing the remote towards the receiver's remote sensor until "Complete" is displayed on the TV - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 160
A default code will be output when you have set a preset code or learned code in the macro step. 1 Press AMP. The receiver can be operated using the remote. 2 Press MENU. The menu is displayed on the TV screen. 3 Press V/v repeatedly to select " Settings," then press or b. 4 Press V/v repeatedly to - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 161
bits when the receiver corresponds to Deep Color. Since the gradation of the depth of a color can be expressed more finely with more bits, continuous color changes can be more smoothly expressed. x Digital Cinema Sound (DCS) Unique sound reproduction technology for home theater developed by Sony, in - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 162
sound quality. The D.L.L. feature eliminates these problems, and gives you rich sound for music and movies. x Dolby Digital Digital audio high-definition video, it offers an unprecedented home theater experience. x DSD Audio format used for a Super Audio CD. DSD converts analog signals to digital - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 163
audio encoding/decoding technology for theaters developed by DTS, Inc. It compresses audio less than Dolby Digital, delivering a higher quality sound reproduction. x DTS-ES , important for audio quality, is provided by a crystal transmitter beside the DA converter of the receiver, and this master - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 164
Modulation) A method of converting analog audio to digital audio for easy enjoyment of digital sound. x Progressive A scanning method that a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 165
If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Audio There is no sound, no matter which component is selected, or only a very low-level - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 166
. • Check to make sure the selected audio (digital) input jack is not assigned to other inputs in "Input Assign" in the Input menu (page 103). The source sound input from the HDMI IN jack is not output from an amplifier or the TV speaker connected to the receiver. • Check that the component is - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 167
is selected properly on this receiver. • Check whether the input source of the software being played back corresponds to the multi-channel format. • Check whether the setup on the playback component is set to multi-channel sound. • Check to make sure the selected audio (digital) input jack is not - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 168
be set up. Refer to the operating instructions supplied with the each component. • Be is connected correctly. Images appear later than the associated sound is played when the HDMI input is selected. • to a gas pipe. Outdoor FM antenna (aerial) Receiver Ground (earth) wire (not supplied) To ground - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 169
, you cannot control the connected component using TV's remote. - Depending on the connected component and TV, you may need to set up the component and TV. Refer to the operation instructions supplied with each component and TV. - Change the input of the receiver to the HDMI input connected to the - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 170
of two numbers and a message. You can check the condition of the system by the message. Refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. PROTECTOR Irregular current is output to the speakers, or the upper panel of the receiver is covered - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 171
sound field settings and the source, there may be no sound output. 2)Measured under the following conditions: Power requirements: 120 V AC, 60 Hz Frequency response PHONO MULTI OUT), Impedance: 1 kohm VIDEO 1, ZONE 2, ZONE 3 (AUDIO OUT) FRONT L/R, CENTER, Voltage: 2 V SURROUND L/R, Impedance: - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 172
) including projecting parts and controls Mass (Approx.) 17.5 kg (38 lb 10 oz) Supplied accessories Operating Instructions (this manual) Using Network Features (1) Quick Setup Guide (1) GUI Menu List (1) Optimizer microphone ECM-AC1 (1) FM wire antenna (aerial) (1) AM loop antenna (aerial) (1) AC - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 173
connection 109 Blu-ray Disc Player 35, 38, 58 C Calibration Type Select 52, 130 Category Mode 72 CD player 29, 32 Center Mix 114, 131 Changing the display 133 Cinema Studio EX (mode) 84 Clear memory 44 remote 144 Connections antennas 43 audio components 28 monitor 26 speakers 24 video components 33 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 174
Party Mode 96 Phase Audio 117, 130 Phase Noise 116, 130 PHONES 9 PIP (Picture in Picture) 19 PLII 80 PLIIx 80 Position (Auto Calibration) 112, 130 Preset channels 73 Preset Mode 74 174GB Preset stations 67 PROTECTOR 170 Q Quick Click 145 Quick Setup 50 R Radio ID 71 Recording 107 Remote 17-21, 45 - Sony STR-DA6400ES | Operating Instructions (Large File - 15.25 MB) - Page 175
V VCR 40 Video 61, 123 VIDEO 2 IN/PORTABLE AV IN jacks 41 X XM 68 XM Radio 68 Z Zone 12V Trigger 120, 133 ZONE 2 114 175GB Additional Information
Printed in Malaysia
©2008 Sony Corporation
STR-DA6400ES
3-875-814-
11
(1)
Operating Instructions
Multi Channel
AV Receiver