Sony STR-DG1200 Operating Instructions (Large File - 11.07 MB)
Sony STR-DG1200 - 7.1 Channel Surround Sound A/v Receiver Manual
View all Sony STR-DG1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STR-DG1200 manual content summary:
- Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 1
3-289-135-11(1) Multi Channel AV Receiver Operating Instructions STR-DG1200 ©2008 Sony Corporation - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 2
the event of trouble. Batteries or user to the presence of important operating and maintenance (servicing) instructions receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 3
. About This Manual • The instructions in this manual are for model STR-DG1200. Check your model number by looking at the lower right corner of the front panel. • The instructions in this manual describe the controls on the supplied remote. You can also use the controls on the receiver if they have - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 4
under license from Neural Audio Corporation and THX Ltd. Sony Corporation hereby grants the user a non-exclusive, non-transferable, limited right of use to this product under USA and foreign patent, patent pending and other technology or trademarks owned by Neural Audio Corporation and THX Ltd - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 5
6: Preparing the receiver and the remote .... 34 7: Operating the receiver using the GUI (Graphical User Interface 36 8: Setting the speakers 39 9: Calibrating the appropriate speaker settings automatically (Auto Calibration 41 Playback Selecting a component 47 Listening to a Super Audio CD/CD - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 6
digital and analog audio (INPUT MODE 93 Enjoying the sound/images from other inputs 94 Changing the display window 96 Using the sleep timer 100 Recording using the receiver 100 Using a bi-amplifier connection 102 Operating without connecting to the TV 103 Using the Remote Operating each - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 7
lamp lights off) (initial setting). Press POWER to turn the receiver on. You cannot turn the receiver on using the remote. On/Standby Press ?/1 on the remote to - turn the receiver on (the ON/ STANDBY lamp lights up in green). - set the receiver to standby mode (the ON/STANDBY lamp lights up in red - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 8
(XM/SIRIUS) (page 110). D Remote sensor Receives signals from remote commander. E Display window The current status of the selected component or a list of selectable items appears here (page 97). F MULTI CHANNEL DECODING lamp Lights up when multi channel audio signals are decoded. G Digital - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 9
sound quality (page 17, 19, 26, 27). HDMI IN/ OUT* jacks Connects to a DVD player, Blu-ray disc player, satellite tuner, etc. The image is output to a TV or a projector while the sound can be output from a TV or/and speakers connected to this receiver (page 17, 24). B ANTENNA section FM ANTENNA - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 10
GUI (Graphical User Interface) (page 36). Remote commander You can use the supplied RM-AAL019 Remote Commander to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 115). RM-AAL019 THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 11
Press to turn on or off the audio/ video components that the remote is assigned to operate (page 115). To turn the TV on or off, press TV (X), then press AV ?/1. If you press the ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 12
+ /- Press to adjust the volume level of all speakers at the same time. TV VOL +/- Press TV receiver. Press to display the menu to operate the audio/video components. HOME Press TV (X), then press HOME HDMI OUT or COMPONENT VIDEO MONITOR OUT jack (page 88). V INPUT MODE Press to select the input - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 13
This receiver allows you to use a 7.1 channel system (7 speakers and one subwoofer). Enjoying a 5.1/7.1 channel system To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.1 channel system - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 14
channel speaker system, place the surround back speaker behind the seating position. AFront speaker (left) BFront speaker (right) CCenter speaker DSurround speaker (left) ESurround speaker (right) FSurround back speaker (left) GSurround back speaker (right) HSubwoofer • Since the subwoofer does - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 15
A 13 / 32" (10 mm) A Monaural audio cord (not supplied) B Speaker cords (not supplied) AFront speaker A (left) BFront speaker A (right) CCenter speaker DSurround speaker (left) ESurround speaker (right) FSurround back speaker (left)b) GSurround back speaker (right)b) HSubwooferc) continued 15US - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 16
to standby mode automatically based on the level of the input signal to a subwoofer, then sound may not be output. Notes • When you connect all the speakers with a nominal impedance of 8 ohms or higher, set "Impedance" in the Speaker settings menu to "8 Ω". In other connections, set it to "4 Ω". For - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 17
3: Connecting the TV You can watch the selected input image when you connect the MONITOR OUT or HDMI OUT jack to a TV. You can operate this receiver using a GUI (Graphical User Interface). It is not necessary to connect all the cords. Connect the audio and video cords according to the jacks of your - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 18
video signals" (page 31). • The sound of the TV is output from the speakers connected to the receiver if you connect the audio output jack of the TV and the TV IN jacks of the receiver. In this configuration, set the audio output jack of the TV to "Fixed" if it can be switched between - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 19
Connecting components with digital audio input/output jacks The following illustration shows how to connect a Super Audio CD player, CD player, an MD deck and DIGITAL MEDIA PORT adapter. Super Audio CD player, CD player MD deck A B C A DIGITAL MEDIA PORT adapter A Audio cord (not supplied - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 20
to only the COAXIAL SA-CD/ CD IN jack on this receiver. When you play a Super Audio CD, connect the player to the MULTI CHANNEL INPUT or SA-CD/CD IN jacks on this receiver. Refer to the operating instructions supplied with the Super Audio CD player. • You cannot make digital recordings of a Super - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 21
If your DVD player, Blu-ray disc player or Super Audio CD player is equipped with multi channel output jacks, you can connect them to the MULTI CHANNEL INPUT jacks of this receiver to enjoy multi channel sound. Alternatively, the multi channel input jacks can be used to connect an external multi - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 22
illustration shows how to connect a component with analog jacks, such as a tape deck, turntable, etc. Turntable MD deck, Tape deck A A A Super Audio CD player, CD player A Audio cord (not supplied) Note If your turntable has a ground (earth) wire, connect it to the (U) SIGNAL GND terminal. 22US - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 23
With HDMI jack input/output jacks to be connected The image quality depends on the connecting jack. See the illustration that follows. Select the connection according to the jacks on your components. Digital Analog High quality image Note Be sure to turn on the receiver when the video and audio - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 24
when the image is converted. • This receiver supports High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD) and HDMI (Deep Color, x.v.Color). • This receiver supports the Control for HDMI function. For details, see "Control for HDMI" (page 83). • HDMI 3 input has a better sound quality. When you - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 25
VIDEO OUT jacks or MONITOR OUT jacks. • The audio and video signals of HDMI input are not output from the HDMI OUT jack while the receiver menu is displayed. • When you want to listen to the sound from the TV speaker, set "Audio Out" to "TV+AMP" in the HDMI settings menu. If set to "AMP", the sound - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 26
to the jacks of your components. Note To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. Audio signals DVD player Video signals A B C D E A Optical digital cord - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 27
to the jacks of your components. Note To input multi channel digital audio from the Bluray disc player, set the digital audio output setting on the Blu-ray disc player. Refer to the operating instructions supplied with the Blu-ray disc player. Audio signals Blu-ray disc player Video signals - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 28
to connect all the cords. Connect the audio and video cords according to the jacks of your components. Audio signals Satellite tuner, set-top box Video signals A B C A Audio cord (not supplied) B Video cord COMPONENT VIDEO COMPO 1 or COMPO 2 IN jacks, set "Input Assign" in the Input menu. 28US - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 29
necessary to connect all the cords. Connect the audio and video cords according to the jacks of your components. Audio signals DVD recorder, VCR Video signals A B Camcorder, video game A Audio cord (not supplied) B Video cord (not supplied) C Audio/video cord (not supplied) (On the front panel - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 30
table classified by the menu settings" (page 32). In the video input/output conversion table of the receiver Output Signals BC ABC BC C A B Input Signals OUTPUT jack INPUT jack HDMI IN 1/2/3/4 A COMPONENT VIDEO IN B VIDEO IN C HDMI OUT f a a COMPONENT VIDEO MONITOR OUT X MONITOR VIDEO OUT - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 31
to 480p can be output to the COMPONENT VIDEO MONITOR OUT jacks. The HDMI OUT jack has no restriction on resolution. • Video signals for which the the Video settings menu when receiving a signal that supports Closed Captions. Use the same kind of cords for the input/output signals. continued 31US - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 32
, see "Converting analog video input signals" (page 88). "Resolution" Output from menu setting Input signals DIRECT Component video Video the TV, etc., is connected to the HDMI OUT jack. • If you select a resolution that the connected TV does not support in the "Resolution" menu, the images - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 33
the AC power cord. FM wire antenna (supplied) AM loop antenna (supplied) Notes • To prevent noise pickup, keep the AM loop antenna away from the receiver and other components. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 34
6: Preparing the receiver and the remote Connecting the AC power cord Connect the AC power cord to a wall outlet. Note Before connecting the AC power cord, make sure that metallic wires of the speaker cords are not touching each other between the SPEAKERS terminals. AC power cord Performing initial - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 35
reset them. You can switch the command mode (AV SYSTEM 1 or AV SYSTEM 2) of the receiver and the remote. If both the receiver and the other Sony component respond to the same remote command, switch the command mode of either the component or the receiver to another command mode so that the component - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 36
of the RM-AAL019 remote 1 SHIFT 2 THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD AV SYSTEM 2. 3 Press ENT/MEM before the AMP button lights off. The AMP button flashes twice, then the command mode setting process is completed. 7: Operating the receiver using the GUI (Graphical User - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 37
menus The following menu items are available in each settings menu. Input Selects the input to the receiver. For details on each input, see "Selecting a component" (page 47). Music You can listen to the music from an audio component connected the DIGITAL MEDIA PORT adapter. For details on the Music - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 38
through menus using the GUI 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 RETURN/ EXIT O HOME 2-9 MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 39
Set the appropriate speaker impedance for the speakers you are using. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-5 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 40
. Notes • If you are not sure of the impedances of the speakers, refer to the operating instructions supplied with your speakers. (This information is often found on the back of the speaker.) • When you connect all speakers with a normal impedance of 8 ohms or higher, set "Impedance" to "8 Ω". When - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 41
. - PCM signals with a sampling frequency of more than 96 kHz are being received. The DCAC is designed to obtain proper sound balance in your room. However, you can adjust the speaker levels and balance manually according to your preference. For details, see "Making settings with the Test Tone - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 42
beforehand. Turn the MASTER VOLUME knob to just before the mid-point. • If you connect a subwoofer with the crossover frequency function, set the value to maximum. • If you connect a subwoofer with an auto standby function, set it to off (deactivated). 1 Connect the supplied optimizer microphone - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 43
and to un-check the items you do not want to measure. • Speaker Distance • Speaker Level • Frequency Characteristic HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 44
measurement result appears on the TV screen. Tips • Operations other than turning the receiver on or off are deactivated during the measurement. • When connecting special speakers, such as dipole speakers, the measurements may not be performed correctly or Auto Calibration cannot be performed. To - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 45
cases. - The multi channel input is selected. - "2ch Analog Direct" is being used. - Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. - PCM signals with a sampling frequency of more than 96 kHz are being received. Tip The size of a speaker (LARGE/SMALL) is - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 46
Warning Code: 43 The distance and position of a subwoofer cannot be detected. This may be caused by noise. [W-xxx: 43]* Try to perform the measurement in a quiet environment. NO WARNING There is no warning information. * xxx represents a speaker channel. F Front FL Front Left FR Front Right - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 47
NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 HOME CATEGORY TUNING CATEGORY MODE TUNING 3 DISC SKIP MUTING 1 Press one of the input buttons to select the component you want. You can also use INPUT SELECTOR on the receiver. Selected input VIDEO 1 Components that can be played back VCR - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 48
connected to the MULTI CHANNEL INPUT jack. DMPORT Portable audio, etc., connected to the DIGITAL MEDIA PORT adapter connected to the receiver. HDMI 1, 2, 3, HDMI components connected 4 to the HDMI IN 1, HDMI IN 2, HDMI IN 3 or HDMI IN 4 jack. XM XM Mini-Tuner and Home Dock connected to the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 49
MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 2 3 HOME CATEGORY TUNING CATEGORY MODE TUNING DISC SKIP 5 3 BD/DVD TOP MENU MENU F1 F2 MACRO 1 MACRO 2 5 • The operation is described for a Sony Super Audio CD player. • Refer to the operating instructions supplied with - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 50
2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 2 3 HOME CATEGORY TUNING CATEGORY MODE TUNING DISC SKIP MULTI CHANNEL DECODING lamp 6 3 BD/DVD TOP MENU MENU F1 F2 MACRO 1 MACRO 2 6 • Refer to the operating instructions supplied with the TV and DVD - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 51
SKIP VIDEO 2 IN/PORTABLE AV IN 6 3 BD/DVD TOP MENU MENU F1 F2 MACRO 1 MACRO 2 6 Refer to the operating instructions supplied with the TV and video game. 1 Turn on the TV and video game. 2 Turn on the receiver. 3 Press VIDEO 2 to select "VIDEO 2*". You can also use INPUT SELECTOR on this - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 52
MODE 2 3 HOME CATEGORY TUNING CATEGORY MODE TUNING DISC SKIP 6 3 BD/DVD TOP MENU MENU F1 F2 MACRO 1 MACRO 2 6 Refer to the operating instructions supplied with the TV and VCR. 1 Turn on the VCR. 2 Turn on the receiver. 3 Press VIDEO 1 to select "VIDEO 1*". You can also use INPUT SELECTOR - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 53
through the front right speaker simultaneously. • MAIN Sound of the main language will be output. • SUB Sound of the sub language will be output. x Decode Priority (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the HDMI IN jacks. • PCM When - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 54
the receiver using the GUI (Graphical User Interface Audio Out (HDMI audio input setting) Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection. • TV+AMP The sound is output from the TV's speaker and the speakers connected to the receiver - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 55
to the receiver. The multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when "Audio Out" is set to "AMP". x Subwoofer Level (Subwoofer level for HDMI) Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 56
DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 2 3-6 HOME MENU 1 Start playing a sound source you want to listen to (CD, DVD, etc.). 2 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 57
left/right speakers and a subwoofer, select "A.F.D. Auto". This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from a subwoofer to a 2 channel signal. x 2ch Analog Direct You can switch the audio of the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 58
Maximum number and the receiver of channels COAXIAL/OPTICAL HDMI Dolby Digital 5.1ch a a Dolby Digital EX 6.1ch a a Dolby Digital Plus a) Dolby TrueHD a) 7.1ch 7.1ch × a × a DTS 5.1ch a a DTS-ES 6.1ch a a DTS 96/24 5.1ch DTS-HD High Resolution Audio a) 7.1ch DTS-HD - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 59
2 channel stereo sound as multi channel sound. A.F.D. mode appears in GUI menu [Display window] Multi channel Effect audio after channel left/right signals from all speakers. However, sound may not be output from certain speakers depending on the speaker settings. * Depending on the speaker - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 60
looking at the logo on the package. • Dolby Pro Logic IIx decoding is effective when a multi channel signal is input. If you connect a subwoofer This receiver will generate a low frequency signal for output to the subwoofer when there is no LFE signal, which is a low-pass sound effect output from - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 61
of the receiver's preprogrammed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home. Sound you use headphones when the multi channel input is selected. Outputs the front analog signals from the MULTI CHANNEL INPUT jacks. * You can select this - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 62
settings menu. However, the sound will be output from the subwoofer if the digital input signal contains LFE signals, or if the front or surround speakers are set to "SMALL", the sound field for movie is selected, or "Portable Audio" is selected. Tips • Sound fields with DCSmarks use DCS technology - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 63
channel input is selected. - Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. - PCM signals with a sampling frequency of more than 96 kHz are being received. Advanced Speakers Set Up Adjusting the speaker settings manually You can adjust each speaker manually - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 64
to select the parameter you want. 8 Press V/v repeatedly to adjust the setting. Manual Setup menu parameters x Level (Level of speaker) You can adjust each speaker's level (center, surround left/right, surround back left/right, subwoofer). You can adjust the level from -20 dB to +10 dB in 0.5 dB - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 65
are set to "LARGE". However, the sound will be output from the subwoofer if the digital input signal contains LFE signals, or if the front or surround speakers are set to "SMALL", the sound field for movie is selected, or "Portable Audio" is selected. Tips • The "LARGE" and "SMALL" settings for each - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 66
settings with the Test Tone menu 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-7 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 67
items may not be displayed, depending on the setting of the speaker pattern. x Phase Audio (Phase Audio) • OFF • L/R, L/C, C/R, R/SL, R/SR, SR/SL, SR/ SBR, SBR/SBL, SR/SB, SBL/SL, SB/SL, SL/L, L/SR Lets you output the front 2 channel source sound (instead of the test tone) sequentially from adjacent - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 68
(bass/treble level) of all speakers. Bass Treble Level (dB) Frequency (Hz) Note This function does not work in the following cases. - The multi channel input is selected. - Dolby TrueHD signals with a sampling frequency of more than 96 kHz are being received. - PCM signals with a sampling - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 69
. Tip You can adjust the front speaker bass and treble level with TONE MODE and TONE +/- on the receiver. 6 Press to enter the setting. ). Automatic tuning 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE HOME 1 2-4 OPTIONS MENU 1 Press GUI MODE repeatedly - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 70
from high to low. The receiver stops scanning whenever a station is received. In case of poor FM stereo reception 1 Press OPTIONS. 2 Press V/v to select "FM Mode", then press or b. 3 Press V/v to select "MONO", then press . 4 THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 SAT - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 71
the stations you often listen to. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2, 5-7 4 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 72
and Home Dock required (each sold separately) to receive XM service. It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate or otherwise make available any technology or software incorporated in receivers compatible with the XM Satellite Radio System. Installation costs - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 73
the full channel lineup. Activation normally takes 10 to 15 minutes, but during peak busy periods you may need to keep your XM Ready audio system move your antenna to various window locations around your home to see where the best reception will be received. Most XM customers place the antenna in a - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 74
SIRIUS jack Connect the SiriusConnect Home tuner. When you use the SiriusConnect Home tuner with this receiver, be sure to connect the AC power adaptor supplied with the tuner to a wall outlet. Keep the SiriusConnect Home tuner, antenna, and AC power adaptor away from the speaker cords and the power - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 75
XM Radio ID or SIRIUS ID number 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-3 3 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 76
You can select a channel from one category or all the categories. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-4 HOME OPTIONS MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 77
up to 30 XM Radio channels and 30 SIRIUS Satellite Radio channels. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2, 5,6 4 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 78
HDMI3 HDMI4 6 XM SIRIUS 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE 2, GUI MODE 1 4,5 RETURN/ EXIT O HOME 4 MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 79
locked. Enter your 4-digit lock code." appears. 3 Press SHIFT, then press the numeric buttons to enter your 4-digit lock code. The channel is tuned in. Tuner Operations "The channel has been locked." appears and the Parental Lock is set. To delete the numbers you have entered, go back to step 4 by - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 80
press the numeric buttons to enter your 4-digit lock code. "The channel has been unlocked." appears and the channel is unlocked. Notes • When you select a channel using Category Tuning, locked channels are skipped. • When the receiver is reset to the factory settings, the lock code returns to the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 81
XM Mini-Tuner and Home Dock securely and XM antenna cable is damaged. check the antenna cable for damage. Replace the XM antenna if the cable is damaged. CH Unauthorized You selected an XM channel that is Consult the latest channel guide at [UNAUTH] blocked or cannot be received with your www - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 82
if the AC adaptor supplied with the SiriusConnect Home tuner is connected to a wall socket. Invalid Channel You have entered an invalid channel [INVALID] number. The channel to be tuned-in is void due to the change by the broadcast service, or the receiving condition is not good. Locked The - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 83
as a DVD/Blu-ray disc player, the receiver and the TV are turned on automatically and switched to the appropriate HDMI input. • System Audio Control: While watching TV, you can select to output the sound from the TV speaker or the speakers connected to the receiver. • System Power Off: When you turn - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 84
to TV multi channel surround sound broadcasting from the speakers connected to the receiver. Connect the OPTICAL output jack of the TV to the OPTICAL IN jack of the receiver. Satellite tuner, Set-top box Audio/video signals Blu-ray disc player Audio/video signals DVD player Audio/video signals - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 85
in the display window. This receiver will automatically change the input to HDMI input. When the setting is completed, "COMPLETE" appears on the display window. For details, refer to the operating instructions of the TV. If your TV does not support the Control for HDMI-Easy Setting function, do the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 86
To set Control for HDMI 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 1 2-5 HOME MENU 1 Press GUI MODE repeatedly to select "GUI ON". "GUI MODE" appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 87
TV menu. For details, refer to the operating instructions of the TV. When System Audio Control function is turned on, the receiver will turns on and switches to the appropriate input automatically. TV sound is output from the speakers connected to the receiver, and the volume of the TV is minimized - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 88
components turn off automatically. You can also use the receiver's remote to turn off the TV. TV THEATER SHIFT TV AMP 1 VIDEO1 2 VIDEO2 3 TV INPUT BD DVD AV ?/1 Press TV, then press AV ?/1. The TV, receiver and the components connected via HDMI are turned off. Notes • Set the TV Standby - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 89
receiver. For details on connecting the DIGITAL MEDIA PORT adapter, see "Connecting components with digital audio input/output jacks" (page 19). Sony sure to turn the receiver off using the remote. • Do not connect or disconnect the DIGITAL MEDIA PORT adapter to/from the receiver while the system is - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 90
-NC1. The list of tracks will be displayed on the GUI screen of the receiver. You can select a track you want and play it back on each GUI . If "DMPORT Control" is not displayed, refer to the operating instructions supplied with component for details on operating that component. 90US Operating the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 91
operating the adapter using the adapter GUI menu, refer to the operating instructions supplied with the adapter you are using. To operate the TDM-iP1/iP50 using the following play mode buttons on the remote of the receiver. Press DMPORT on the remote to enable DMPORT operation. To Do the following - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 92
. No Device There is no device connected to the adapter. No Audio No audio file was found. Loading The data is being read. No Server* connected components. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE 3-4 2 HOME 1 Choose the item you want to name. - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 93
or the multi channel input is selected, audio input mode is set to "ANALOG". You cannot select other audio input modes. HOME 1 Press the input button. You can also use INPUT SELECTOR on the receiver. 2 Press INPUT MODE repeatedly to select the audio input mode. The selected audio input mode appears - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 94
of this receiver when you want to input the video signals from the DVD player. Assign video and/or audio signals to the DVD input jack using "Input Assign" in the Input menu. 2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE 2, 3,5 GUI MODE 1 6 4 HOME MENU 1 Press - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 95
cannot assign optical signals from an input source to the optical input jacks on the receiver, and you cannot assign coaxial signals from the input source to the coaxial input jacks on the receiver. • When you assign the digital audio input, the INPUT MODE setting may change automatically. Other - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 96
2CH/ A.DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE GUI MODE HOME Press DISPLAY repeatedly. Each time you t Sound field type t Volume level XM Radio and SIRIUS Satellite Radio Channel name t Channel number t Category name t Artist name/Feature t Song/program title t - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 97
ST L C R HDMI DMPORT ANALOG LPCM EQ Bl- AMP XM SIRIUS A.DIRECT SL S SR SB L SB SB R Name A SW B LFE C COAX D OPT Function Lights up when subwoofer is connected and the audio signal is output from the SUBWOOFER jack. While this indicator lights up, the receiver creates a subwoofer signal based - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 98
memory function, such as Name Input etc., is activated. Name Function P XM Lights up when XM MiniTuner and Home Dock are connected and "XM RADIO" is selected. Q ; PL/ ; PL II/ ; PL IIx "; PL" lights up when the receiver applies Dolby Pro Logic processing to 2 channel signals in order to output - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 99
up when multi channel input is selected. Lights up when the receiver recognizes a component connected via an HDMI IN jack. Name wj Playback channel indicators L R obtained by 6.1 channel decoding) Example: Recording format (Front/ Surround): 3/2.1 Output channel: When "Speaker Pattern" is set - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 100
the sleep timer will be cancelled. Recording using the receiver You can record from a video/audio component using the receiver. Refer to the operating instructions supplied with your recording component. THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 5 6 WIDE SAT TV MD/ TAPE - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 101
from the sources. • The audio input signals from the MULTI CHANNEL INPUT jacks are not output. • Only analog input signals are output from the analog output jack (for recording). • Only digital input signals are output from the digital output jack (for recording). • HDMI sound cannot be recorded - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 102
to the FRONT SPEAKERS A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SURROUND BACK SPEAKERS terminals. Make sure that the metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Otherwise, it may cause the receiver to malfunction - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 103
can operate this receiver using the display screen using a GUI. Navigating through menus on the display window THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 SAT 7 TUNER -/-- 5 TV or fixed and unchangeable. HOME 2 1 Press AMP. 2 Press MENU. 3 Press V/v - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 104
) SBL -20.0 dB to SBL +10.0 dB [SBL LEVEL] (0.5 dB step) Surround back right speaker levelc) SBR -20.0 dB to SBR +10.0 dB [SBR LEVEL] (0.5 dB step) SR 0 dB SB 0 dB SBL 0 dB SBR 0 dB Subwoofer level [SW LEVEL] SW -20.0 dB to SW +10.0 dB (0.5 dB step) SW 0 dB Dynamic range - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 105
m to SBL 9'10" [SBL DIST.] SBL 10.00 m) (1 inch (0.01 m) step) (3.00 m) Surround back right speaker distance [SBR DIST.] SBR 3'3" to SBR 32'9" (SBR 1.00 m SBR 9'10" to SBR 10.00 m) (1 inch (0.01 m) step) (3.00 m) Subwoofer distance [SW DIST.] SW 3'3" to SW 32'9" (SW 1.00 m to SW 9'10" SW 10.00 - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 106
speakers treble level [SUR TREBLE] TUNER [] FM station receiving mode [FM MODE] Naming preset stations [NAME IN] XM antenna aiming modec) [XM ANT AIM] XM radio IDc) [XM ID] Parental lockd) [PARENTAL] Lock code editd) [CODE EDIT] AUDIO [ - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 107
] Subwoofer level for HDMI [SW LEVEL] AMP, TV+AMP SW AUTO, SW +10 dB, SW 0 dB AMP SW AUTO SYSTEM Naming inputs [] [NAME IN] For details, see "Naming inputs" (page 92). Brightness of the display window 100% DOWN, 60% DOWN, [DIMMER] 0% DOWN 0% DOWN a)xxx represents a speaker channel - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 108
press GUI MODE, or connect headphones. Tips • Operations other than turning the receiver on or off are deactivated during Auto Calibration. • When connecting special speakers, such as dipole speakers, the measurements may not be performed correctly or Auto Calibration cannot be performed. To - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 109
can continue to use the receiver. xxx* : - - - No speakers are connected. * xxx represents a speaker channel. FL Front Left FR Front Right CNT Center SL Surround Left SR Surround Right SB Surround Back SBL Surround Back Left SBR Surround Back Right SW Subwoofer Tip Depending on the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 110
, see "Tuner Operations" (page 69). Tuning radio stations 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press TUNING + or TUNING -. Press TUNING + to scan from low to high frequencies, press TUNING - to scan from high to low frequencies - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 111
While checking the parameter, aim your antenna to where the best reception will be received. For details on the parameter, see "XM Signal Strength can also use INPUT SELECTOR on the receiver. 2 Press CATEGORY MODE repeatedly to select "ONE CAT". • ALL CAT: You can select a channel from all the - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 112
specified category is selected. 4 Press TUNING + or TUNING - to select the channel. You can also press TUNING MODE on the receiver to select "AUTO", then turn TUNING +/- to select the channel. Selecting a channel number directly (Direct tuning) 1 After selecting a satellite tuner, press SHIFT, then - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 113
component using the remote When you program the remote to control the following Sony or non-Sony components, you can use the buttons on the remote that are marked with circles. Note, however, that some buttons may not operate your component. If you want to change the contents of the input list to - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 114
DVD/ player player, terminal terrestrial A/B MD PORT VHS LD (UC) receiver deck device combo player (EURO) AV ?/1 zz z z z zz z z z zz Numeric buttons (SHIFT mode) zz z z z zz z z z zzz z TV INPUT, WIDE z (SHIFT mode) -/-- (SHIFT mode) zz z z z zz z z z z ENT/MEM (SHIFT - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 115
the receiver and point the remote towards the receiver when performing the following procedure. 1 SHIFT THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 down RM SET UP, press AV ?/1. The RM SET UP button flashes. 2 While the RM SET UP button is flashing, press the input button (including TV) for - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 116
component will not respond to some or all of the codes. • All of the input buttons on this remote may not be available when used with your particular component. To control a CD player Maker SONY DENON JVC KENWOOD MAGNAVOX MARANTZ ONKYO PANASONIC PHILIPS PIONEER TECHNICS YAMAHA Code(s) 101, 102 - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 117
not work even though you enter the code for AIWA, enter the code for Sony instead. To control a DVD player Maker SONY BROKSONIC DENON HITACHI JVC MITSUBISHI ORITRON PANASONIC PHILIPS PIONEER RCA SAMSUNG TOSHIBA ZENITH Code(s) 547, 549, 558 508, 545, 546, 560, 567 continued 117US Using the Remote - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 118
544 515, 534, 556 To control a satellite tuner Maker SONY AMSTRAD BskyB GENERAL ELECTRIC(GE) GRUNDIG HUMAX THOMSON PACE PANASONIC 868 867 873 872 875 869, 870 To control a cable box Maker SONY HAMLIN/REGAL JERROLD/G.I./ MOTOROLA JERROLD OAK PANASONIC PHILIPS PIONEER RCA SCIENTIFIC ATLANTA TOCOM/ - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 119
batteries with new ones. Program the sequence of the operation 1,5 THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 SAT 7 TUNER -/-- 5 TV DIRECT A.F.D. MOVIE MUSIC INPUT NIGHT RESOLUTION MODE SLEEP MODE GUI MODE AMP 2,3 Using the Remote HOME CATEGORY TUNING CATEGORY - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 120
more than 1 second MACRO 1 or MACRO 2 Make a one second interval. When you want to make a longer interval, press MACRO 1 or MACRO 2 repeatedly. The input button selected in step 2 flashes twice, then lights up again. 4 Repeat steps 2 and 3. When you want to assign another command for the same - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 121
to learn the code using the learning function. Note When setting up the receiver to learn the remote command modes, replace the batteries with new ones. 1,6 1 3 2,3 THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 SAT 7 TUNER -/-- 5 TV 8 PHONO 0/10 6 WIDE MD/ TAPE SA - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 122
SET UP button flashes five times. Try to perform the process again from step 2. Clearing all the contents of the remote's memory THEATER SHIFT TV AMP 1 2 3 TV INPUT VIDEO1 VIDEO2 BD DVD 4 SAT 7 TUNER -/-- 5 TV 8 PHONO 0/10 6 WIDE MD/ TAPE SA-CD/ CD 9 D.TUNING MULTI IN DMPORT ENT - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 123
bits when the receiver corresponds to Deep Color. Since the gradation of the depth of a color can be expressed more finely with more bits, continuous color changes can be more smoothly expressed. x Digital Cinema Sound (DCS) Unique sound reproduction technology for home theater developed by Sony, in - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 124
forbit identical to the original studio masters and provides supreme-quality audio up to 8 channels at 96 kHz/24 bit and up to 6 channels at 192 kHz/24 bit. Together with highdefinition video, it offers an unprecedented home theater experience. x DTS 96/24 A high sound quality digital signal format - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 125
HDMI (High-Definition Multimedia Interface) HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio subwoofer in Dolby Digital or DTS, etc. By adding a deep bass with a frequency between 20 to 120 Hz, audio proposed by Sony, and is a trademark of Sony. xvYCC is - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 126
changed only at a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a large volume, you have any questions or problems concerning your receiver, please consult your nearest Sony dealer. 126US - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 127
while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Audio There is no sound, no matter which component is selected, or only a very low-level sound is heard. • Check that the speakers and components are - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 128
this receiver. • Check whether the input source of the software being played back corresponds to the multi channel format. • Check whether the setup on the playback component is set to multi channel sound. • Check to make sure the selected digital audio input jack is not assigned to other inputs in - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 129
input to the HDMI jack is not output from the receiver or the TV speaker. • Check the HDMI connection (page 24). • You cannot listen to the Super Audio CD by connecting HDMI. • Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 130
via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. - Select the component or input you want to watch when you watch a program on the component connected to the TV. Refer to the operating instructions of the TV on this operation. The TV's remote - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 131
. Refer to the following table to solve the problem. If any problem persists, consult your nearest Sony dealer. PROTECTOR Irregular current is output to the speakers, or the upper panel of the receiver is covered with something. The receiver will automatically turn off after a few seconds. Check - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 132
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel (analog) AUDIO OUT Voltage: 150 mV/ 1 kohm SUBWOOFER Voltage: 2 V/1 kohm Equalizer Gain levels ±10 dB, 1 dB step 3)INPUT SHORT (with - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 133
receiver. While holding down TUNING MODE, press POWER on the receiver 80 MHz HD Pass Through HDMI Video Input/Output (HDMI Repeater block) 640 × 480p Instructions (this manual) Quick Setup Guide (1) GUI Menu List (1) Optimizer microphone (ECM-AC2) (1) FM wire antenna (1) AM loop antenna (1) Remote - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 134
Clear memory 34 remote 122 Command mode 35 Connections antennas 33 audio components 18 speakers 15 TV 17 video components 23 Control for HDMI 83 Crossover Freq /Treble) 68 GUI (Graphical User Interface) 17, 36 H HDMI (Settings) 54, 107 HDMI jacks 9, 24 HDMI Subwoofer Level 55 Headphone (Settings) 61 - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 135
MEDIA PORT 92 Error 131 SIRIUS 82 XM 81 Movie 61 MULTI CHANNEL DECODING lamp 50 Music 61 Muting 48 N Name Input 92 Network Client 90 Neural-THX 59 NIGHT MODE 63 O One-Touch Play 86 P Parental Lock 78, 106 Phase Audio 67, 104 Phase Noise 67, 104 PHONES 8 PLII 59 PLIIx 59 - Sony STR-DG1200 | Operating Instructions (Large File - 11.07 MB) - Page 136
Sony Corporation Printed in Malaysia
©2008 Sony Corporation
3-289-135-
11
(1)
Multi Channel AV
Receiver
Operating Instructions
STR-DG1200