Sony STR-DN840 Operating Instructions (Large File - 14.22 MB)
Sony STR-DN840 Manual
View all Sony STR-DN840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony STR-DN840 manual content summary:
- Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 1
Multi Channel AV Receiver Operating Instructions 4-454-467-12(1) STR-DN840 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 2
persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 3
or moisture, does not operate normally, or has been dropped. To reduce the risk of electric shock, the speaker cord should be connected to the apparatus and the speakers in accordance with the following instructions. 1) Disconnect the AC power cord from the MAINS. 2) Strip 10 to 15 mm of the wire - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 4
Manual • The instructions in this manual are for model STR-DN840 manual as "USA model only". • The instructions in this manual describe the operation of the receiver with the supplied remote control. You can also use the buttons or knobs on the receiver and worldwide patents issued & pending. DTS- - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 5
. DLNA™, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance. "Sony Entertainment Network" logo and "Sony Entertainment Network" are trademarks of Sony Corporation. Wake-on-LAN is a trademark of International Business - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 6
used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 7
(mains lead 33 Turning on the receiver 33 Setting up the receiver using the Easy Setup 33 Configuring the network settings of the receiver 36 Guide to on-screen display (OSD) operation 40 Basic Operations Playing an input source equipment 41 Playing an iPod/iPhone 43 Playing a USB device 45 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 8
menu 86 Easy Setup 88 Speaker Settings menu 88 Audio Settings menu 92 HDMI Settings menu 94 Input Settings menu 95 Network Settings menu 95 System Settings menu 96 Operating without using the OSD 97 Using the Remote Control Reassigning the input button .....103 Resetting the input buttons - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 9
accessories • Operating Instructions (this manual) • Quick Setup Guide (1) • Remote control (RM-AAU170) (1) • R6 (size AA) batteries (2) • FM wire antenna (aerial) (1) Inserting batteries into the remote control Insert two R6 (size-AA) batteries (supplied) in the remote control. Observe the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 10
MUSIC (page 51, 53) E Display panel (page 11) F SOUND OPTIMIZER (page 54) G BLUETOOTH (page 76) Operates the Bluetooth function. H DIMMER Adjusts the brightness of the display panel in 3 levels. I DISPLAY (page 102) J Remote control sensor Receives signals from remote control. K PURE DIRECT (page 55 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 11
display panel A Input indicator Lights up to indicate the current input. HDMI The receiver recognizes the equipment connected via an HDMI IN jack. ARC TV input is selected and the Audio Return Channel G Speaker system indicator (page 35) H Tuning indicator ST Lights up when the receiver tunes - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 12
speaker pattern setting. O A.P.M. Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the DCAC (Digital Cinema Auto Calibration) function (page 33). P UPDATE indicator T USB Lights up when iPod/iPhone or USB device is detected. * When - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 13
30) C NETWORK section LAN port (page 32) Wireless LAN antenna (page 32) D SPEAKERS section ( page 22) E AUDIO INPUT/OUTPUT section White (L) AUDIO IN jacks Red (R) (page 24, 28, 29) Black SUBWOOFER OUT jacks (page 22) F VIDEO INPUT/OUTPUT section (page 24, 28) Yellow VIDEO - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 14
Remote control Use the supplied remote control to operate this receiver and other equipment. The remote control is assigned to operate Sony audio/video equipment. You can reassign the input button to match the equipment connected to your receiver (page 103). RM-AAU170 To use the buttons printed in - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 15
on the display panel. • The Sleep Timer will be canceled when you perform the following. - Press SLEEP again. - Update the software of the receiver. - Press ?/1. MEM Hold down SHIFT (N), then press MEM to store a station during tuner operation. F iPhone CTRL Enters iPod/iPhone control mode when - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 16
17 for information on the buttons that you can use to control each equipment. 2) The 5/JKL/VIDEO, PARTY START/CLOSE, D.TUNING/N, and SOUND FIELD + buttons have tactile dots. Use the tactile dots as reference when operating the receiver. Notes • The above explanation is intended to serve as examples - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 17
To control other Sony equipment Name B TV ?/1 C Numeric buttons CLEAR G POP UP/MENU TOP MENU I OPTIONS J HOME K ./> m/M N, X, x Q RETURN O R V/v/B/b, S DISPLAY T SHUFFLE REPEAT W TV INPUT TV VCR z z z z z z z z z z z z z z z z z z DVD player z z z z z z z z z z z z z Blu-ray - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 18
" (page 33). Setting the receiver See "Setting up the receiver using the Easy Setup" (page 33). Setting the audio output settings on the connected equipment To output multi channel digital audio, check the digital audio output setting on the connected equipment. For a Sony Blu-ray Disc player, check - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 19
receiver supports the following audio formats. Audio format [Display] Connection between the playback Maximum number equipment and the receiver of channels correspond to the format. For details, refer to the operating instructions of the playback equipment. b) Signals with a sampling frequency - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 20
speakers This receiver allows you to use up to a 7.2 channel system (7 speakers and 2 subwoofers). Example of speaker system configuration 7.1 channel speaker system using surround back speakers You can enjoy high fidelity reproduction of DVD or Blu-ray Disc software recorded sound in 6.1 channel - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 21
system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers. Place the front high speakers - at an angle between 25° to 35°. - at an angle of 20° ± 5° in height. 20˚ ± 5˚ Tip Since the subwoofer does not emit highly directional signals - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 22
cords, be sure to disconnect the AC power cord (mains lead). Surround speaker Center speaker Right Left B B A A B B Subwoofer * Right Left Surround back/ Bi-amplifier/ Front high/ Front B speaker** A Monaural audio cord (not supplied) B Speaker cord (not supplied) Right Left Front - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 23
on the receiver (page 35). - You can connect the front speakers to this terminals using bi-amplifier connection (page 23). Set the "SB Assign" to "Bi-Amp" in the Speaker Settings menu (page 90). Note After you have installed and connected your speaker, be sure to select the speaker pattern from the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 24
OUT jack to a TV. You can operate this receiver using a OSD (On-Screen Display) if you connect HDMI TV OUT jack to a Video signals Audio/Video signals ARC A** B** C D* A Optical digital cord (not supplied) B Audio cord (not supplied) C Video cord (not supplied) D HDMI cable (not supplied) Sony - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 25
jacks of the receiver to output the TV sound from the speakers connected to the receiver, set the sound output jack of the TV to "Fixed" if it can be switched between either "Fixed" or "Variable". To listen to the sound from the TV If your TV does not support System Audio Control function, set the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 26
video equipment, 4K or 3D images may not be displayed. Check the 3D image formats supported by the receiver (page 120). • Refer to the operating instructions Input Assign" in the Input Settings menu (page 83) when the sound is not output correctly. • When connecting optical digital cords, insert the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 27
an HDMI- authorized cable or Sony HDMI cable. Notes • BD input has a better sound quality. When you need a higher sound quality, connect your equipment to the BD (for AUDIO) jack and select BD as input. • The default settings for the BD input button on the remote control is Blu-ray Disc player. Be - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 28
HDMI jacks Satellite tuner, cable TV tuner Audio signals Video signals VCR, DVD recorder, Video game Audio signals Video signals or A B C B C A Optical digital cord (not supplied) B Audio cord (not supplied) C Video cord (not supplied) Recommended connection Alternative connection 28US - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 29
to disconnect the AC power cord (mains lead). Super Audio CD player, CD player Audio signals or A B Connecting an iPod, iPhone, USB device A iPod, iPhone, USB device A USB cable (not supplied) A Coaxial digital cord (not supplied) B Audio cord (not supplied) Recommended connection Alternative - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 30
. A Broadband line connection A Broadband line connection to the Internet is required in order to listen to Sony Entertainment Network (SEN) and to update the software of the receiver. Modem This is the device that is connected to the broadband line to communicate with the Internet. Some of these - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 31
a device which delivers content (music, photos, and videos) to a DLNA device on a home network. A device that can be used as a server (a computer, etc.) must be connected to your wireless or wired LAN home network*. * For details on servers which are compatible with this receiver, see page 57. 31US - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 32
Configuration example The following illustration is a configuration example of a home network with the receiver and a server. We recommend that you connect the server to the router with a wired connection. Internet Modem Server Router LAN cable (not supplied) LAN cable ( - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 33
. Follow the on-screen instructions to set up the receiver. You can set up the following functions using the Easy Setup. - Language - Speaker Settings - Network Settings Turning on the receiver ?/1 Press ?/1 (on/standby) to turn on the receiver. Notes on Speaker Settings (Auto Calibration) This - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 34
received. The DCAC is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually Speaker B" in the Speaker Settings menu if you use speakers front B connection (page 90). • Make sure the speaker output is not set to "SPK active subwoofer setup • When - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 35
terminals in accordance with the intended use. Note This setting is only available if the "Speaker Pattern" is set to a setting without surround back and front high speakers. 1 Press HOME. The home menu is displayed on the TV screen. 2 Press V/v repeatedly to select "Settings", then press . 3 Press - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 36
on the remote control or turn the INPUT SELECTOR on the receiver. - Press . - Press SPEAKERS on the receiver. - Change the volume level. - Connect the headphones. To set up the receiver manually See "Adjusting Settings" (page 86). Configuring the network settings of the receiver The network settings - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 37
from a label on your wireless LAN router/access point, from the operating instructions, from the person who set up your wireless network, or from the information provided by your Internet service provider. 1 Select "Wireless Setup" in step 5 in "Using a wired LAN connection" (page 36). If "Change - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 38
enter the value for "Primary DNS" and "Secondary DNS". 6 Press b. "Connecting to the internet" flashes on the TV screen. "Network setup is completed" appears after the network settings are completed and " " lights up on the display panel. To return to the Network Settings menu, press . (Depending on - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 39
details on entering the PIN code into the wireless LAN router/access point, refer to the operating instructions of the wireless LAN router/access point. If you cannot find the network name (SSID) you want (manual setup method) You can input the network name (SSID) you want manually if it does not - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 40
Guide to on-screen display (OSD) operation You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote control. When you start operating the receiver, make sure to press AMP on the remote control first. - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 41
the video source to be input to the receiver (page 41). Listen Selects the music from the SA-CD/CD, USB device, Bluetooth device, Home Network or SEN (page 41). You can also enjoy FM/AM radio of the built in receiver. Sound Effects Enables you to enjoy sound development provided by various Sony - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 42
use MASTER VOLUME on the receiver. 6 Press SOUND FIELD +/- to enjoy the surround sound. You can also use A.F.D./2CH, MOVIE or MUSIC on the receiver. For details, see page 51. Tips • You can turn INPUT SELECTOR on the receiver or press input buttons on the remote control to select the equipment you - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 43
iPod classic iPhone 4S iPhone 4 iPhone 3GS iPhone 3G Notes • Sony cannot accept responsibility in the event that data recorded to iPod/iPhone is lost or damaged when using an iPod/iPhone connected to this receiver. • This product has been designed specifically to work with iPod/iPhone and has - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 44
the remote control USB SHUFFLE REPEAT iPhone CTRL HOME 1 Press HOME. The home menu is displayed on the TV screen. 2 Select "Listen", then press . 3 Select "USB", then press . When the iPod or iPhone is connected, "iPod/iPhone" appears on the TV screen. 4 Follow the on-screen instructions to - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 45
receiver is recognizing and reading information of the iPod or iPhone. Not supported An unsupported iPod or iPhone is connected. No device is connected No iPod or iPhone is connected. No music No music was found. Headphones not supported No sound Sony USB devices on this receiver. Verified Sony - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 46
N 1 Press HOME. The home menu is displayed on the TV screen. 2 Select "Listen", then press . 3 Select "USB", then press . When the USB device is connected, "USB" appears on the TV screen. You can operate the USB device using the remote control of the receiver. 4 Select the content you want from the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 47
using the remote control USB SHUFFLE seconds before "Reading" appears depending on the type of USB device connected. • When the USB device is connected, the receiver receiver does not necessarily support all the functions provided in a connected USB device. • The playback order for the receiver - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 48
USB message list Message and explanation Reading The receiver is recognizing and reading information of the USB device. Device error The memory of the USB device could not be recognized (page 45). Not supported An unsupported USB device is connected, an unknown device is connected, or the USB device - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 49
. Select "Tuning +" to scan from lower to higher frequency stations, select "Tuning -" to scan from higher to lower stations. The receiver stops scanning whenever a station is received. In case of poor FM stereo reception 1 Tune in the station you want to listen to using Auto Tuning, Direct Tuning - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 50
the AM tuning scale You can change the AM tuning scale to either 9 kHz or 10 kHz using the buttons on the receiver. ?/1 TUNING MODE 1 Press ?/1 to turn off the receiver. 2 While holding down TUNING MODE, press ?/1 on the receiver. The current AM tuning scale is changed to 9 kHz (or 10 kHz). To - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 51
display panel. Enjoying Sound Effects Selecting the sound field 1 Select "Sound Effects" from the home menu, then press . 2 Select "Sound Field", then press . 3 Select the sound field you want. Tip You can select the sound field you want by pressing SOUND FIELD +/- repeatedly on the remote control - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 52
and front speaker level can be adjusted. Note You cannot select "Analog Direct" while using the BD, DVD, GAME, Bluetooth, USB, Home Network, SEN and AirPlay function. Movie mode You can take advantage of surround sound simply by selecting one of the receiver's pre-programmed sound fields. They bring - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 53
a dimension of presence and depth. x Neo:6 Cinema (Neo:6 CIN) Performs DTS Neo:6 Cinema mode decoding. A source recorded in 2 channel format is decoded into 7 channels. Music mode You can take advantage of surround sound simply by selecting one of the receiver's pre-programmed sound fields. They - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 54
of more than 48 kHz are being received. - "Analog Direct" is selected. • "PLII Movie", "PLIIx Movie", "PLII Music", "PLIIx Music", "PLIIz Height", "Neo:6 Cinema", and "Neo:6 Music" do not work when the speaker pattern is set to 2/0 or 2/0.1. • When one of the sound fields for music is selected, no - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 55
are fixed. • Depending on the audio format, the receiver may play back signals at a lower sampling frequency than speaker. Bass Treble Level (dB) The Pure Direct mode lets you enjoy higher fidelity sound. When Pure Direct is on, the display panel lights off to suppress noise that affects sound - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 56
network. • With an Internet connection, you can listen to music services (page 65) and update the software of the receiver. • You can listen to the same music at the same time in different rooms through the PARTY STREAMING function. • You can register Media Remote devices to control the receiver - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 57
receiver. • Sony VAIO Media plus 1.3, 1.4, 2.0, and 2.1 • Sony HDD Network Audio System NAS-S500HDE*, NAS-S55HDE* • Sony Network AV receiver STR Media Player 12. 1 Go to Control Panel. Select [All Apps] under [Start]. Select [Control Panel]. Tip If the Windows 8 display does not appear like above, - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 58
advanced sharing settings]. 2 Select [View network status and tasks] under [Network and Internet]. The [Network Sharing Center] window appears. Tip If the item you want does not appear on the display, try to change the display type of the Control Panel. 4 Select [Choose media streaming options - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 59
completed, refresh the server list of the receiver and select this server from the server list display, try to change the display type of the Control Panel. 3 Select [Public network] under [View your active networks]. If the display shows other than [Public Network], go to step 6. The [Set Network - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 60
is used. 5 Follow the instructions that appear on the display according to the environment in which the receiver is used. When the settings are completed, confirm that the item under [View your active networks] is changed to [Home network] or [Work network] in the [Network and Sharing Center] window - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 61
menu. If you are using Windows XP, go to step 9. 4 When is displayed, select [Networking...]. 7 Confirm that [Location type] is changed to [Private], and select [Close]. 8 Confirm that [(Private network)] is displayed on the [Network and Sharing Center] window, and close the window. 9 If [Share my - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 62
play AAC files with the extension of ".m4a", ".mp4" or ".3gp" only. Server This receiver HOME NETWORK ALPHABET SEARCH SHUFFLE REPEAT DISPLAY V/v/B/b, RETURN O OPTIONS HOME N ./> X x 1 Press HOME NETWORK. The server list appears on the TV screen. If the last selected item (playlist, album - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 63
the item you want appears. The items that are displayed depend on the connected server. 4 Select the track you want, then press . Playback starts. Make sure that sound is being output from the speakers of the receiver. Notes • Tracks that the receiver cannot play appear on the TV screen as well - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 64
on the home network. 1 Select "Control Device" in receiver, you can easily enjoy the receiver by the operation on your remote device. To register the TV SideView Device 1 Press HOME NETWORK. Tip You can also select "HOME NETWORK receiver will exit the registration if no device detected in 30 seconds - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 65
file is stored and right-click the file to display the [Properties] window. If there is a [License] tab, the file is DRMcopyrighted and cannot be played back on this receiver. Operating Home Network function using the remote control To Do the following Pause playback* Press X during playback - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 66
function is changed to SEN function, until the receiver is turned off. When "Network Standby" is set to "On", the last selected service or station is displayed even if you turned off the receiver. To operate SEN function using the remote control To Do the following Change the Press RETURN O to - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 67
services, how to enjoy services, and the registration code of the receiver. http://munlimited.com/home Checking the registration code You may be required to enter the registration code of the receiver when you enjoy a new music service. 1 Select "Listen" from the menu, then press . Using Network - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 68
on the TV screen. If the receiver automatically displays the last selected service or station, press RETURN O repeatedly until the service provider list appears. 3 Select "Registration Code", then press . The registration code of the receiver appears. Using the PARTY STREAMING function PARTY - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 69
receiver can be streamed. During PARTY host, video signals are not output to the TV, and audio signals will downmix to 2 channel. In this case, you can only select "2ch Stereo" as sound field. • When you start a PARTY as PARTY host, you may face a time gap between the audio output and visual display - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 70
"Compatible iPod/iPhone/iPad models" on this page for details on the supported versions of iOS or iTunes. • Update iOS or iTunes to the latest version before using with the receiver. • Refer to the operating instructions of your device for details on operating iOS devices, iTunes or AirPlay. • You - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 71
name See "Device Name" (page 96) for instructions on how to rename the device. To control AirPlay playback You can use the 2 +/-, N, X, x, ., >, SHUFFLE and REPEAT buttons. Operation from the receiver and the remote control is active only when the receiver is selected as the device for output. When - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 72
or invalid. Not in use An operation that is currently prohibited is being performed. Not supported The access point device does not support the WPS PIN code method. Home Network Message and explanation Cannot connect The receiver cannot be connected to the selected server. Cannot get info The - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 73
device list. No server is available There is no server on the network that the receiver can connect to. Try refreshing the server list (page 62). receiver does not recognize the data on the server. Software update is required The service is not available in the current version of the receiver - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 74
for an item using a keyword When a list is displayed on the TV screen (such as artist list, a track list, etc.), you can enter a keyword to search for an item you want. Searching by keywords is available only when the Home Network or SEN function is selected. Numeric/ text buttons ALPHABET - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 75
specification. This receiver supports the following Bluetooth version and profiles: Communication System: Bluetooth Specification version 3.0 Compatible Bluetooth Profiles: - A2DP (Advanced Audio Distribution Profile): Receiving audio content of high-quality. - AVRCP 1.3 (Audio Video Remote Control - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 76
refer to the operating instructions of your Bluetooth device. A list of detected devices may appears on the Bluetooth device display depending on the type of Bluetooth device. This receiver is displayed as "STR-DN840". Note When establishing a connection with this receiver, select the audio profile - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 77
, refer to the operating instructions of your Bluetooth device. 3 Start playback from the Bluetooth device. You can also press N on the remote control. 4 Adjust the volume. Press 2 +/- (or turn the MASTER VOLUME knob on the receiver). Note Depending on the type of Bluetooth device, you can adjust - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 78
time you press DISPLAY, the display will change cyclically as follows: Bluetooth device name t Bluetooth device address t Sound field currently applied t Volume level t Input you selected Setting the Bluetooth audio codecs You can enable or disable AAC (Advanced Audio Coding) audio. 1 Select "BT - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 79
Features What is "BRAVIA" Sync? The "BRAVIA" Sync function allows communication between Sony products such as TV, Blu-ray Disc player, DVD player, AV amplifier, etc. that supports the Control for HDMI function. By connecting Sony equipment that is compatible with the "BRAVIA" Sync with an HDMI cable - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 80
to use the Control for HDMI function. For details on setting the TV and connected equipment, refer to the operating instructions of the respective ), then set the receiver to standby mode, sound and image can be output only from the TV. Notes • Be sure that the System Audio Control function is set to - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 81
you enjoy the TV sound from the speakers connected to the receiver, you can adjust the volume or turn off the sound temporarily by using the TV's remote control. Notes • If System Audio Control does not function according to your TV setting, refer to the operating instructions of the TV. Press - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 82
appears on the connected TV. You can switch an input of the receiver or switch sound fields by using your TV's remote control. You can also adjust the level of the center speaker or the subwoofer, or adjust the settings of "Sound Optimizer" (page 54), "Dual Mono" (page 93), or "A/V Sync." (page 93 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 83
Channel (ARC) signals. If your TV is not compatible with the ARC function, the digital optical audio signals are selected. If the Control for HDMI functions of both the receiver . Notes • Based on the input, "------" appears on the display panel, and other modes cannot be selected. • When "Analog - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 84
step 4 using V/v/B/b. 6 Press . Input name Assignable audio input jacks OPT 1 OPT 2 COAX None BD DVD GAME SAT/ VIDEO SA-CD/ CATV CD a a a a* a a a a a a a a a a a a a a* a* a* a* a a* a * Default setting Notes • When you assign the digital audio input, the INPUT MODE - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 85
a bi-amplifier connection 1 Select "Settings" from the home menu, then press . The Settings menu list appears on the TV screen. 2 Select "Speaker Settings", then press . 3 Select "Speaker Pattern", then press . 4 Select the appropriate speaker pattern so that there are no surround back speakers and - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 86
, then press to access the menu item. Example: When you select "Speaker Settings" You can adjust various settings for speakers, surround effects, etc. using the Settings menu. RETURN O V/v/B/b, HOME 1 Press HOME. The home menu is displayed on the TV screen. 4 Select the parameter you want, then - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 87
page 95) Network Settings (page 95) System Settings (page 96) Auto Calibration Calibration Type Speaker Pattern A.P.M. Center Lift Up SB Assign Manual Setup Crossover Freq. Test Tone Distance Unit D.L.L. Sound Optimizer Equalizer Sound Field A/V Sync. Auto Volume Dual Mono D.Range Comp. Control for - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 88
The menu parameters displayed on the TV screen vary, depending on the current settings or the status of the selected icon. Easy Setup Re-runs the Easy Setup to make the basic settings. Follow the on-screen instructions (page 33). Speaker Settings menu You can adjust each speaker manually. You can - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 89
Display and explanation Error Code 30 Headphones are connected to PHONES on front panel of receiver. Remove the headphones and redo Auto Calibration. Error Code 31 The SPEAKERS is set to off. Set to other speaker settings and perform the Auto Calibration again. Error Code 32 Error Code 33 Speakers - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 90
Direct", and "Multi Stereo" is being used. - The sound field for music is being used. x SB Assign (Surround back speaker assign) Lets you set the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals for a bi-amplifier or speakers front B connection. For details, see "To set the surround - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 91
sound fields for music is selected, no sound is output from the subwoofer if all the speakers are set to "Large" in the Speaker Settings menu. However, the sound in 10 cm (1 inch) intervals. Notes • Depending on the speaker pattern setting, some parameters may not be available. • This function does - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 92
output the test tone. 3 Adjust the speaker level for manual test tone, then press . * "Fix SB" appears when only one surround back speaker is connected. x Distance Unit Lets you select the unit of measurement for setting distances. • feet: The distance is displayed in feet. • meter: The distance is - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 93
not work when "Analog Direct" is being used. • The delay time may vary depending on audio format, sound field, speaker pattern and speaker distance settings. x Auto Volume This receiver can adjust the volume automatically depending on the input signal or content from the connected equipment. This - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 94
jack. x Control for HDMI Lets you turn the Control for HDMI speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 95
of Fast View. This fast HDMI switching function supports all HDMI inputs. • Auto: You can select HDMI network settings. For details, see "Configuring the network settings of the receiver" (page 36). • Wired Setup • Wireless Setup x Information Lets you check the network information for the network - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 96
Press . Tip The default device name is "STR-DN840 is the last 6 digits of MAC Address of the receiver. x Network Standby While the "Network Standby" mode is set to "On", the receiver can always be connected and controlled over the network. 1 Select "Network Standby", then press . 2 Select "Off" or - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 97
NETWORK", or "SEN" input is selected. - AirPlay or PARTY STREAMING function is being used. - The software of the receiver is being updated. receiver. DISPLAY RETURN O AMP MENU V/v/B/b, Using the menu on the display panel 1 Press AMP MENU. The menu is displayed on the display panel of the receiver - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 98
Parameters [Display] Settings Auto Calibration start [A.CAL START] Auto Calibration typea) [CAL TYPE] Auto Phase Matchinga) [A.P.M.] Test toneb) [TEST TONE] Front left speaker levelb) [FL LEVEL] Front right speaker levelb) [FR LEVEL] Center speaker levelb) [CNT LEVEL] Surround left speaker levelb - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 99
Menu [Display] Speaker settings [] Parameters [Display] Speaker pattern [SP PATTERN] Center Speaker Lift up [CNT LIFT] Front speakers sizeb) [FRT SIZE] Center speaker sizeb) [CNT SIZE] Surround speakers sizeb) [SUR SIZE] Front high speakers sizeb) [FH SIZE] Surround back speaker assignd - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 100
] Input settings [] Surround settings [] EQ settings [] Parameters [Display] Settings Front right high speaker distanceb) RH 1.00 m to RH 10.00 m [RH DIST.] (RH 3'3" to RH 32'9") (0.01 m (1 inch) interval) Subwoofer distanceb) [SW DIST.] SW 1.00 m to SW 10. - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 101
Bluetooth settings [] Parameters [Display] Front high speakers bass level [FH BASS] Front high speakers treble level [FH TREBLE] FM station receiving mode [FM MODE] Naming preset stations [NAME IN] Digital Legato Linear [D.L.L.] Sound Optimizer [OPTIMIZER] Synchronizes audio with video output - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 102
. g) You can only select this parameter when a Bluetooth device is paired. h) x.xxx represent a version number. To view the information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to check the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 103
receiver, you can set the SAT/CATV button on this remote control to control the Blu-ray Disc player. Note You cannot reassign the TV, TUNER, BLUETOOTH, USB, HOME NETWORK to the operating instructions supplied with the Blu-ray Disc player or Blu-ray Disc recorder. b)Sony DVD recorders are operated - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 104
dealer. • The AC power cord (mains lead) must be changed only at a qualified service shop. On heat buildup Although the receiver heats up during operation, this is not a malfunction. If you continuously use this receiver at a large volume, the cabinet temperature of the top, side and bottom rises - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 105
, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild This receiver supports security functions that comply with the Bluetooth specification to ensure secure connection during communication using Bluetooth - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 106
while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Note that if service personnel changes some parts during repair, these parts may be retained. Power The receiver is turned off automatically - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 107
is not set to "VOL MIN". • Check that the SPEAKERS is not set to "SPK OFF" (page 35). • Check that headphones are not connected to the receiver. • Press on the remote control to cancel the muting function. • Try pressing the input button on the remote control or turning the INPUT SELECTOR on the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 108
level (page 90). • Check that the speaker settings are appropriate for the setup using the Auto Calibration menu or "Speaker Pattern" in the Speaker Settings menu. Then check that sound is output from each speaker correctly, using "Test Tone" in the Speaker Settings menu. • Some discs have no Dolby - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 109
TV. Refer to the operating instructions of the TV on this operation. • When "Analog Direct" is being used, the sound is not output. Use other sound field (page 51). • When using the Control for HDMI function, you cannot control the connected equipment using TV's remote control. - Depending on the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 110
test tone is output from a different speaker than the speaker displayed on the TV screen. • The speaker pattern set up is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. When the receiver is in standby mode, there is no sound output from the TV. • When the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 111
the stations (page 50). • Press AMP, then press DISPLAY repeatedly on the remote control so that the frequency appears on the display panel. iPod/iPhone The sound is distorted. • Press 2 - on the remote control repeatedly. • Set the "EQ" setting of the iPod/ iPhone to "Off" or "Flat". There is no - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 112
, etc. cannot be played back. * This unit supports FAT16 and FAT32, but some USB device may not support all of these FAT. For details, refer to the operating instructions of each USB device or contact the manufacturer. Network connection The receiver cannot connect to the WPS via a wireless LAN - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 113
. • Make sure that the wireless LAN router/access point is turned on. Cannot control the receiver using the TV SideView device. • The receiver may take a long time to connect to the network after you turn on the receiver. Wait for a few moments, and then try using the TV SideView again. • Make - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 114
is in a format supported by this receiver (page 62). • sound skips during playback. • The bandwidth of your wireless LAN may be too low. Move the receiver Depending on the network environment, it the operating instructions supplied with cannot extend the folder to display its contents. Cannot play back - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 115
is connected to your home network. • Update the AirPlay software version of the receiver and the iOS device to the latest version (page 71). The sound skips. • The sound may skip depending on factors such as the network environment when you use a wireless network. • The servers are overloaded. Close - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 116
that the settings that allow iTunes to accept control from this receiver are active. • The receiver is not selected as the remote speaker on the iOS device. Select the receiver as the network speaker. SEN You cannot connect the receiver to a service. • Make sure that the wireless LAN router/access - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 117
up to 4 equipment - AV receiver (audio system): up to 1 equipment Remote control The remote control does not function. • Point the remote control at the remote control sensor on the receiver (page 10). • Remove any obstacles in the path between the remote control and the receiver. • Replace all the - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 118
system by the message. If any problem persists, consult your nearest Sony dealer. PROTECTOR Irregular current is output to the speakers, or the receiver is covered and ventilation holes are blocked. The receiver will automatically turn off after a few seconds. Remove the object covering the upper - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 119
AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) With 6 ohm loads, both channels driven, from 20 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 120
HDMI Video Input/Output (HDMI Repeater block) Format 2D 4096 × 2160p @ 23.98/24 a a a a a a a a a a a a a a a a a a a a - - - - - - iPod/iPhone section DC 5V 1.0 A MAX USB section Supported format* MP3 (MPEG 1 Audio Layer-3): 32 kbps - 320 kbps, VBR AAC: 16 kbps - 320 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 121
band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs3) SBC4), AAC Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 122
85 Bi-amplifier connection 85 Bluetooth Playing 77 Bluetooth Settings 101 BRAVIA Sync preparing 79 C Cable TV tuner 27, 28 Calibration Type 98 CD player 29 122US Center Lift Up 90 Clear memory 85 remote control 104 sound field 56 Connection antennas 30 audio equipment 29 Network 30 speakers 22 TV - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 123
65 Muting 42 N Name Input 51 Network settings 95 Network Standby 96 Network Update 97 O One-Touch Play 80 OSD (On-Screen Display) 40 P PARTY STREAMING 68 Pass Through 94, 101 Passkey 76 PlayStation 3 27 Preset Memory 50 Preset stations 50 PROTECTOR 118 Pure Direct 55 R Remote control 14 Resetting 33 - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 124
Software Update 97 Sound Effects 51 Sound field 51 Speaker Pattern 90, 99 Speaker Settings 88, 99 SPEAKERS 35 Subwoofer Level 95 Super Audio CD player 29 Surround Settings 100 System Audio Control 81 System Power-Off 81 System Settings 96, 102 T Test Tone 92, 98 Treble 100 Tuner 48 Tuner Settings - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 125
copies, transfer all of the SONY SOFTWARE (including but not limited to all copies, component parts, media, instruction manuals, other printed materials, electronic systems, air traffic control, direct life support machines or weapons systems, in which the failure of the SONY SOFTWARE could lead to - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 126
it is specifically provided that the SONY SOFTWARE is not designed or intended for use on any product other than the PRODUCT. SONY provides no warranty , DOWN TIME AND USER'S TIME, REGARDLESS OF WHETHER SONY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, SONY'S ENTIRE LIABILITY TO - Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 127
- Sony STR-DN840 | Operating Instructions (Large File - 14.22 MB) - Page 128
4-454-467-12(1) ©2013 Sony Corporation Printed in Malaysia
4-454-467-
12
(1)
STR-DN840
Multi Channel
AV Receiver
Operating Instructions