Sony STR-K670P Operating Instructions (HT-DDW670) - Page 20

Storing FM stations automatically - AUTOBETICAL (Models of area code CEL, CEK only) This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals. If you want to store FM or AM stations one by one, see "Presetting radio stations" (page 20). Use the buttons on the receiver for the operation. 1 Press ?/1 to turn off the receiver. 2 Hold down MEMORY and press ?/1 to turn the receiver back on. "AUTO-BETICAL SELECT" appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. For more details on RDS, see page 21. Regular FM stations are assigned 2character preset codes and stored after the RDS station. When done, "FINISH" appears in the display momentarily and the receiver returns to the normal operation. Notes • Do not press any button on the receiver or supplied remote during autobetical operation, except ?/1. • If you move to another area, repeat this procedure to store stations in your new area. • For details on tuning the stored stations, see "Tuning to preset stations" (page 21). • If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Presetting radio stations You can preset up to 30 FM or AM stations. Then you can easily tune in the stations you often listen to. Presetting radio stations 1 Press FM or AM to select the FM or AM band. The last received station is tuned in. 2 Tune in the station that you want to preset using Automatic Tuning (page 19) or Direct Tuning (page 19). 3 Press MEMORY. "MEMORY" appears in the display for a few seconds. Do steps 4 to 5 before the display goes out. 4 Press PRESET TUNING + or PRESET TUNING - repeatedly to select a preset station number. Each time you press the button, you can select the preset station number as follows: tA1yA2y...yA0yB1yB2y...yB0T tC0y...yC2yC1T If "MEMORY" goes out before you select the preset station number, start again from step 3. Tip You can also use the remote to select a preset station number. Press SHIFT repeatedly to select a memory page (A, B or C) and then press the numeric buttons to select a preset number. 5 Press MEMORY again. The station is stored to the selected preset number. If "MEMORY" goes out before you press MEMORY, start again from step 3. 6 Repeat steps 2 to 5 to preset another station. 20GB