Sony STR-K670P Operating Instructions (HT-DDW670) - Page 36

Remote Button X ws x w; O wj V/v wk B/b wk V/v/B/b wk Operations Function VCR/ CD player/ DVD player/ MD deck/ Tape deck Pauses playback or recording. (Also starts recording with components in recording standby.) VCR/ CD player/ DVD player/ MD deck/ Tape deck Stops playback. DVD player Returns to the previous menu or exits the menu. Receiver Selects a menu item. Receiver Adjusts or changes the setting. VCR/ Selects a menu item. Satellite tuner/ DVD player Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • When you press input buttons (VIDEO 1, VIDEO 2 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV. • To activate the buttons with orange printing, press TV and the button you want simultaneously. . Changing the factory setting of an input button If the factory settings of the input buttons do not match your system components, you can change them. For example, if you have a CD player and you do not have a DVD player, you can assign the DVD button to your CD player. 1 Hold down the input button whose input you want to change (for example, DVD). 2 Press the corresponding button of the component you want to assign to the input button (for example, 5 - CD player). The following buttons are assigned to select the input: To operate Press VCR (command mode VTR 3*) 1 VCR (command mode VTR 2*) 2 DVD player or 3 DVD recorder (command mode DVD 1) DVD recorder 4 (command mode DVD 3) CD player 5 MD deck 6 Tape deck B 7 Tuner (this receiver) 8 DSS (Digital Satellite Receiver) 9 DCS (Digital CS Tuner) 0/10 BSD (Digital BS Tuner) -/-- *Sony VCRs are operated with a VTR 2 or 3 setting. These correspond to 8 mm and VHS respectively. Now you can use the DVD button to control the CD player. To reset a button to its factory setting Repeat the above procedure. To reset all the input buttons to their factory setting Press ?/1, TEST TONE and MASTER VOL - at the same time. 36GB