Sony STR-K670P Operating Instructions (HT-DDW670) - Page 41
continued, FM tuner General - reset
View all Sony STR-K670P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Additional Information Models of area code AU (6 ohms 120 Hz - 20 kHz, THD 0.09%) FRONT2): 40 W/ch CENTER2): 40 W SURR2): 40 W/ch (6 ohms 100 Hz, THD 0.09%) SUB WOOFER2): 40 W (6 ohms 1 kHz, THD 0.7%) FRONT2): 50 W/ch CENTER2): 50 W SURR2): 50 W/ch (6 ohms 100 Hz, THD 0.7%) SUB WOOFER2): 50 W (6 ohms 1 kHz, THD 10%) FRONT2): 85 W/ch CENTER2): 85 W SURR2): 85 W/ch (6 ohms 100 Hz, THD 10%) SUB WOOFER2): 85 W 1) Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz CEL, CEK, SP 230 V AC, 50 Hz AU, E51 240 V AC, 50 Hz MX 127 V AC, 60 Hz 2) Depending on the sound field settings and the source, there may be no sound output. Inputs (Analog) SA-CD/CD, DVD, VIDEO 1, 2 Sensitivity: 800 mV Impedance: 50 k ohms Inputs (Digital) DVD (Coaxial) SA-CD/CD (Optical) Sensitivity: - Impedance: 75 ohms Sensitivity: - Impedance: - Output (Analog) SUB WOOFER Voltage: 2 V Impedance: 1 k ohm Reproduction frequency range: 28 - 20,000 Hz Tone Gain levels ±6 dB, 1 dB step FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz FM wire antenna 75 ohms, unbalanced 10.7 MHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1,710 kHz3) With 9-kHz tuning scale: 531 - 1,710 kHz3) Models of area code CEL, CEK, AU, SP With 9-kHz tuning scale: 531 - 1,602 kHz Model of area code E51 With 10-kHz tuning scale: 530 - 1,610 kHz3) With 9-kHz tuning scale: 531 - 1,602 kHz3) Models of area code MX With 10-kHz tuning scale: 530 - 1,610 kHz Antenna Loop antenna Intermediate frequency 450 kHz 3) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. General Power requirements Area code U, CA CEL, CEK AU E51 SP MX Power requirements 120 V AC, 60 Hz 230 V AC, 50/60 Hz 240 V AC, 50 Hz 120/220/240 V AC, 50/60 Hz 220-230 V AC, 50/60 Hz 127 V AC, 60 Hz Power consumption Area code U, SP, E51, AU, CEL, CEK, MX CA Power consumption 160 W 220 VA continued 41GB