Sony STR-K740P Operating Instructions (primary manual) - Page 16
Multi channel surround setup, continued - sp off
View all Sony STR-K740P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Multi channel surround setup (continued) When placing surround speakers behind you B A A 45° C C 90° 20° Note Do not place the center speaker farther away from the listening position than the front speakers. Normal Speaker and Micro Satellite Speaker For HT-DDW840 and HT-DDW740, the speaker size and the sub woofer selection has been preset to MICRO SP. (Micro Satellite Speaker) according to the supplied speaker system. When you select MICRO SP., the speaker size and sub woofer selection has been configurated as follows: Speaker FRONT CENTER SURROUND SUB WOOFER Settings SMALL SMALL SMALL YES You cannot change the configuration if you select MICRO SP. If you change the speaker system, select NORM. SP. You can adjust the speaker size and subwoofer selection when you select NORM. SP. (page 18). To select NORM. SP., turn off the power, then turn on again while pressing LEVEL. (To reset to MICRO SP., do the same procedure.) Tip The setting for Micro Satellite Speaker (MICRO SP.) has been programmed to optimize the sound balance. If you use Sony's Micro Satellite Speakers, select MICRO SP. Caution When you use Micro Satellite Speakers and the speaker size is set to "LARGE", you may not obtain the correct soundstage. The speaker may also be damaged at high volume position. Specifying the speaker parameters 1 Press SET UP. 2 Press MENU or MENU to select the parameter you want to adjust. 3 Press MENU + or MENU - to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 until you have set all of the parameters that follow. Initial settings Parameter L R DIST. XX.X m (ft.)* C DIST. XX.X m (ft.)* SL SR DIST. XX.X m (ft.)* SL SR PL. XXX SL SR HGT. XXX Initial setting 5.0 m (16 ft.)* 5.0 m (16 ft.)* 3.5 m (11 ft.)* BEHD. LOW * Models of area code U, CA only. 16GB