Sony STR-K740P Operating Instructions (primary manual) - Page 20

Adjusting the speaker level, Listening to the subwoofer, Adjusting the sound - remote

Get Sony STR-K740P - Fm Stereo/fm-am Receiver PDF manuals and user guides View all Sony STR-K740P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Multi channel surround setup (continued) Adjusting the speaker level Use the remote while seated in your listening position to adjust the level of each speaker. Note The receiver incorporates a new test tone with a frequency centered at 800 Hz for easier speaker level adjustment. 1 Press ?/1 to turn on the receiver. 2 Press TEST TONE on the remote. "T. TONE" appears in the display and you will hear the test tone from each speaker in sequence. 3 Adjust the LEVEL parameters so that the level of the test tone from each speaker sounds the same when you are in your main listening position. Press LEVEL to adjust the balance and level of speakers. For details on the LEVEL menu, see page 28. While adjusting, the test tone is output from the speaker whose adjustment is performed. 4 Press TEST TONE again to turn off the test tone. Tip You can adjust the level of all speakers at the same time. Turn MASTER VOLUME on the main unit or press MASTER VOL +/- on the remote. Notes • The test tone cannot be output when the receiver is set to MULTI CH IN (HT-DDW840 only). • The adjusted value are shown in the display during adjustment. • Although these adjustments can also be made via the front panel using the LEVEL menu (when the test tone is output, the receiver switches to the LEVEL menu automatically), we recommend you follow the procedure described above and adjust the speaker levels from your listening position using the remote. Listening to the subwoofer POWER indicator First, turn down the volume on the receiver. The volume should be set to minimum before you begin playing the programme source. 1 Turn on the receiver and select the programme source. 2 Press POWER on the subwoofer. The POWER indicator on the subwoofer lights up in green. 3 Play the programme source. Adjusting the sound Slight adjustments to the system can enhance your sound enjoyment. Adjusting the subwoofer 1 Rotate LEVEL to adjust the volume. Set the volume level to best suit your preference according to the programme source. Note Do not turn the volume of the woofer to maximum. Extraneous noise may be heard. 20GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
20
GB
Adjusting the speaker level
Use the remote while seated in your listening
position to adjust the level of each speaker.
Note
The receiver incorporates a new test tone with a
frequency centered at 800 Hz for easier speaker level
adjustment.
1
Press
?/1
to turn on the receiver.
2
Press TEST TONE on the remote.
“
T. TONE
”
appears in the display and you
will hear the test tone from each speaker in
sequence.
3
Adjust the LEVEL parameters so that
the level of the test tone from each
speaker sounds the same when you are
in your main listening position.
Press LEVEL to adjust the balance and
level of speakers. For details on the LEVEL
menu, see page 28.
While adjusting, the test tone is output from
the speaker whose adjustment is performed.
4
Press TEST TONE again to turn off the
test tone.
Tip
You can adjust the level of all speakers at the same
time. Turn MASTER VOLUME on the main unit or
press MASTER VOL +/
–
on the remote.
Notes
•
The test tone cannot be output when the receiver is
set to MULTI CH IN (HT-DDW840 only).
•
The adjusted value are shown in the display during
adjustment.
•
Although these adjustments can also be made via
the front panel using the LEVEL menu (when the
test tone is output, the receiver switches to the
LEVEL menu automatically), we recommend you
follow the procedure described above and adjust the
speaker levels from your listening position using the
remote.
Multi channel surround setup
(continued)
POWER indicator
Listening to the subwoofer
First, turn down the volume on the receiver.
The volume should be set to minimum before
you begin playing the programme source.
1
Turn on the receiver and select the
programme source.
2
Press POWER on the subwoofer.
The POWER indicator on the subwoofer
lights up in green.
3
Play the programme source.
Adjusting the sound
Slight adjustments to the system can enhance
your sound enjoyment.
Adjusting the subwoofer
1
Rotate LEVEL to adjust the volume.
Set the volume level to best suit your
preference according to the programme
source.
Note
Do not turn the volume of the woofer to maximum.
Extraneous noise may be heard.