Sony STR-K740P Operating Instructions (primary manual) - Page 42
Selecting the mode of the, remote - remote not working
View all Sony STR-K740P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Remote Button Description (continued) Remote Operations Function Button CLEAR DVD player Press if you made a mistake when you press the number button or press to return to the continuous play etc. SEARCH DVD player MODE Select searching mode. Press to select the unit for search (track, index, etc.) TOP MENU/ DVD player Displays DVD title. GUIDE AV MENU VCR/Satellite/ Displays menu. tuner/ DVD player O VCD player/ Returns to the previous LD player/ menu or exits the menu. DVD player V/v/B/b VCR/Satellite Selects a menu item. tuner/ DVD player ENTER/ VCR/satellite Press to enter the EXECUTE tuner/ selection. DVD player TV ?/1 TV Turns the TV on or off. -/-- TV Selects the channel entry mode, either one or two digit. TV VOL TV +/- Adjust the volume of the TV. TV CH +/- TV Select preset TV channels. TV/ TV VIDEO Selects input signal: TV input or video input. WIDE TV Selects the wide picture mode. USE MODE Remote To set up the remote. AV1 and Remote AV2 Select the command mode of the remote. SOURCE Remote Selects 2ND AV output. ALT Remote Change remote key function to activate those buttons with orange printing. Notes • Some functions explained in this section may not work depending on the model of the receiver. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • The VIDEO 3, TV/SAT, PHONO, AUX, SOURCE, MPX/DUAL, ANALOG DIRECT, 12 and ON SCREEN functions are not available for set operation. Selecting the mode of the remote Set the remote mode using the USE MODE button and the remote mode buttons. Selecting the command mode You can switch the command mode (AV1 or AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Press 1 (AV1) (or 2 (AV2)) while pressing down USE MODE. The indicator lights once (twice for AV2) , then the command mode switches. To check the mode of the remote Press USE MODE. You can check the remote by the indicator. Mode AV1 AV2 Indicator lights once twice To reset the remote to factory settings Press =/1, AV =/1, and MASTER VOL - at the same time. The indicator lights 3 times, then goes off. 42GB