Sony STR-K740P Operating Instructions (primary manual) - Page 49

Changing the factory setting of a function button If the factory settings of the FUNCTION buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck. Note that the settings of the TUNER button cannot be changed. 1 Hold down the Function button whose function you want to change (for example, MD/TAPE). 2 Press the corresponding button of the component you want to assign to the Function button (for example, 4 - Tape deck). The following buttons are assigned to select the functions: To operate CD player DAT deck MD deck Tape deck A Tape deck B LD player VCR (command mode VTR 1*) VCR (command mode VTR 2*) VCR (command mode VTR 3*) TV DSS (Digital Satellite Receiver) DVD VCD player Press 1 2 3 4 5 6 7 8 9 0 >10 ENTER . * Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively. Now you can use the MD/TAPE button to control the tape deck. To reset a button to its factory setting Repeat the above procedure. To reset all the function buttons to their factory setting Press ?/1, AV ?/1 and MASTER VOL - at the same time. Operations Using the Remote RM-U306 49GB