Sony STR-K750P Operating Instructions - Page 33

Other Operations

33

GB

Other Operations

4

Press ENTER.

5

Repeat steps 2 to 4 to assign index

name for another station or program

source.

Note

(Models of area code CEL, CEK only)

You cannot change the name of an RDS station.

Recording

Before you begin, make sure you’ve connected

all components properly.

Recording on an audio tape

or MiniDisc

You can record on a cassette tape or MiniDisc

using the receiver. See the operating

instructions of your cassette deck or MD deck

if you need help.

1

Select the component to be recorded.

2

Prepare the component for playing.

For example, insert a CD into the CD

player.

3

Insert a blank tape or MD into the

recording deck and adjust the

recording level, if necessary.

4

Start recording on the recording deck,

then start playback on the playback

component.

Notes

•

Sound adjustments do not affect the signal output

from the MD/TAPE OUT jacks.

•

Some sources contain copy guards to prevent

recording. In this case, you may not be able to

record from the sources.

Naming preset stations

and program sources

You can enter a name (index name) of up to 8

characters for preset stations and program

sources. These names (for example, “VHS”)

appear in the receiver’s display when a station

or program source is selected. Note that no

more than one name can be entered for each

preset station or program source.

This function is useful for distinguishing

components of the same kind.

For example,

two VCRs can be specified as “VHS” and

“8MM”, respectively. It is also handy for

identifying components connected to jacks

meant for another type of component, for

example, a second CD player connected to the

MD/TAPE jacks.

1

To name a preset station

Press TUNER FM/AM, then tune in the

preset station you want to create an

index name for.

If you are not familiar with how to tune in

preset stations, see “Tuning to preset

stations” on page 30.

To name a program source

Select the program source (component)

to be named.

2

Press MAIN MENU repeatedly to select

“

NAME

”.

3

Create an index name by using MENU +

or MENU – and MENU

or MENU

:

Press MENU + or MENU – to select a

character, then press MENU

to move the

cursor to the next position.

To insert a space

Press MENU + or MENU – until a blank

space appears in the display.

If you’ve made a mistake

Press MENU

or MENU

repeatedly

until the character to be changed flashes,

then press MENU + or MENU – to select

the character you want.

continued

Sony STR-K750P Operating Instructions - Page 33

Recording, Naming preset stations, and program sources

Page 33 highlights