Sony STR-K750P Operating Instructions - Page 48

Specifications (continued) FM tuner section Tuning range 87.5 - 108.0 MHz Antenna terminals 75 ohms, unbalanced Intermediate Frequency 10.7 MHz Sensitivity Mono: Stereo: 18.3 dBf, 2.2 µV/75 ohms 38.3 dBf, 22.5 µV/75 ohms Usable sensitivity S/N Mono: Stereo: 11.2 dBf, 1 µV/75 ohms 76 dB 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1710 kHz5) With 9-kHz tuning scale: 531 - 1710 kHz5) Models of area code E2/E3 With 10-kHz tuning scale: 530 - 1610 kHz5) With 9-kHz tuning scale: 531 - 1602 kHz5) Models of area code CEL, CEK, SP, AU With 9-kHz tuning scale: 531 - 1602 kHz Models of area code MX With 10-kHz tuning scale: 530 - 1610 kHz Antenna Loop antenna Intermediate Frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5 % (50 mV/m, 400 Hz) Selectivity At 9 kHz: At 10 kHz: 35 dB 40 dB 5) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs Video: Outputs Video: 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms General Power requirements Area code Power requirements U, CA, MX 120 V AC, 60 Hz CEL, CEK 230 V AC, 50/60 Hz SP 220 - 230 V AC, 50/60 Hz E2/E3 120/220/240 V AC, 50/60 Hz AU 240 V AC, 50Hz Power consumption Area code Power consumption U, MX 185 W CA 270 VA CEL, CEK, SP, AU 180 W E2/E3 190 W Power consumption (during standby mode) 0.3 W Dimensions 430 × 145 × 298 mm (16 7/8 × 5 6/8 × 11 6/8 inches) including projecting parts and controls Mass (Approx.) 7.2 kg (15 lb 14 oz) 48GB