Sony STR-K840P Operating Instructions (primary manual) - Page 54
Specifications continued
View all Sony STR-K840P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Specifications (continued) Inputs (Digital) DVD/LD (Coaxial) VIDEO 2 (Optical) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 250 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms Tone Gain levels: ±6 dB, 1 dB step FM tuner section Tuning range 87.5 - 108.0 MHz Antenna terminals 75 ohms, unbalanced Intermediate Frequency 10.7 MHz Sensitivity Mono: Stereo: 18.3 dBf, 2.2 µV/75 ohms 38.3 dBf, 22.5 µV/75 ohms Usable sensitivity S/N Mono: Stereo: 11.2 dBf, 1 µV/75 ohms 76 dB 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1710 kHz6) With 9-kHz tuning scale: 531 - 1710 kHz6) Models of area code E2/E3, AR, MX With 10-kHz tuning scale: 530 - 1610 kHz6) With 9-kHz tuning scale: 531 - 1602 kHz6) Models of area code SP, CEL, CEK With 9-kHz tuning scale: 531 - 1602 kHz Antenna Loop antenna Intermediate Frequency 450 kHz Usable sensitivity 50 dB/m (at 1,000 kHz or 999 kHz) S/N 54 dB (at 50 mV/m) Harmonic distortion 0.5 % (50 mV/m, 400 Hz) Selectivity At 9 kHz: At 10 kHz: 35 dB 40 dB 6) You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs Video: Outputs Video: 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms 54GB