Sony TC-WE475 Operating Instructions (primary manual) - Page 23

Additional Information Specifications System Fast-winding time Approx. 100 sec. (with Sony C-60 cassette) Signal-to-noise ratio (at peak level and weighted with Dolby NR off) 55 dB, using Sony TYPE I cassette 57 dB, using Sony TYPE II cassette 58 dB, using Sony TYPE IV cassette S/N ratio improvement With Dolby B NR on: Approx. 5 dB at 1 kHz, 10 dB at 5 kHz With Dolby C NR on: Approx. 15 dB at 500 Hz, 20 dB at 1 kHz Harmonic distortion 0.4% (using Sony TYPE I cassette): 160 nWb/m 315 Hz, 3rd H.D.) 1.8% (using Sony TYPE IV cassette): 250 nWb/m 315 Hz, 3rd H.D.) Frequency response 30-16,000 Hz (±3 dB, (DOLBY NR OFF) IEC), 20-17,000 Hz (±6 dB), using Sony TYPE I cassette 30-17,000 Hz (±3 dB, IEC), 20-18,000 Hz (±6 dB), using Sony TYPE II cassette 30-19,000 Hz (±3 dB, IEC), 20-20,000 Hz (±6 dB), 30-13,000 Hz (±3 dB, -4dB recording), using Sony TYPE IV cassette Wow and flutter TC-WE675: ±0.13% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) TC-WE475: ±0.15% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) Variable pitch range Approx. -30 to + 30 % Inputs Line inputs (phono jacks) sensitivity 0.16 V, input impedance 47 kilohms Outputs Line outputs (phono jacks) rated output level 0.5 V at a load impedance of 47 kilohms, load impedance over 10 kilohms Headphones (stereo phone jack) output level 0.25 mW at a load impedance of 32 ohms General Power requirements U.S.A. and Canadian models: 120 V AC, 60Hz British models: 220-230 V AC, 50/60Hz Other European models: 230 V AC, 50/60Hz Australian models: 240 V AC, 50/60Hz Other models: 120/220/230-240 V AC, 50/60Hz Adjustable with voltage selector Power consumption TC-WE675: 22 watts TC-WE475: 18 watts Dimensions (w/h/d) Approx. 430 × 120 × 300 mm Mass 4.2 kg Supplied accessories Audio connecting cords (2) Control A1II cable (1)* * Supplied for Canadian models only Optional accessory Remote commander RM-J910 For more information on the availability of the remote commander, contact your nearest Sony dealer. Design and specifications are subject to change without notice. 23