Sony TC-WE475 Operating Instructions (primary manual) - Page 9

Playing a Tape 4 Press SET to store your selection. To program the same track again, press SET once more. 1 3 H FRONT RMS BACK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Track number Order on the program 5 Repeat Steps 2 to 4 to program more tracks. If "FULL" appears in the display This means that you've already programmed 28 tracks and can't program any more. 6 Press RMS/START to start RMS Play. The peak level meters appear in the display. To stop RMS Play Press x (CLEAR) once. The RMS program still remains. To resume RMS play, press RMS/START. To cancel RMS Play Press x (CLEAR) repeatedly until the peak level meters appear in the display or eject the tape in deck A. When RMS Play is canceled, the RMS program is automatically erased. To alternate between the RMS and peak level meter displays Press DISPLAY. Tip To play the program again after RMS Play ends, press RMS/START. Notes • During RMS Play, you can only use CHECK, DISPLAY, and x on deck A, and x, m, and M on deck B. • The RMS function may not work properly if a blank space between tracks is short. • If there is a long blank space between tracks, the deck may fast-forward a portion of the blank space. • If your program includes a number for a track that does not exist, the deck will skip that number during RMS Play. Checking the order of tracks in the program Press CHECK. Each time you press this button, the display shows the track numbers in the order they were programmed. After the last track in the program, "End" appears in the display. Adding tracks to the end of a program Press x (CLEAR) once, and follow Steps 2 to 5 in "Creating your own program (RMS Play)" on page 8. Note For more information on the availability of Sony stereo receiver remotes with RMS capability, contact your nearest Sony dealer. 9